Craftsman 486.24586 User manual

Category
Lawnmowers
Type
User manual

Craftsman 486.24586 is a Sleeve Hitch attachment for “Garden Tractors” that have rear tires 23” or larger. It’s not designed to fit or be used on “Yard Tractors” or “Lawn Tractors” that have rear tires 22” or smaller.

Craftsman 486.24586 is a Sleeve Hitch attachment for “Garden Tractors” that have rear tires 23” or larger. It’s not designed to fit or be used on “Yard Tractors” or “Lawn Tractors” that have rear tires 22” or smaller.

Owner's Manual
Model No. 486.24586
SLEEVE HITCH
®
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman
• Safety
• Assembly
• Operation
• Maintenance
• Parts
PRINTEDINUSA FORMNO.41362(05/20/10)
CAUTION:
Before using this product, read
thismanualandfollowallSafety
RulesandOperatingInstructions.
STOP
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions Call 1-866-576-8388
This is an attachment for “Garden Tractors” with 23” or larger rear
tires only. The sleeve hitch is not designed to t or be used on “Yard
Tractors” or “Lawn Tractors” that have 22” or smaller rear tires.
2Call1-866-576-8388formissingpartsorassemblyhelp
DONOTRETURNTOSTORE
TABLE OF CONTENTS
SAFETYRULES .............................................................. 2
ACCESSORIES ............................................................... 3
HARDWAREPACKAGECONTENTS ............................. 3
CARTONCONTENTS ..................................................... 4
TOOLSFORASSEMBLY ................................................ 4
SLEEVEHITCHASSEMBLY ........................................... 5
LOCATETRACTORMODELNUMBER .......................... 5
MOUNTINGASSEMBLY(917MODELTRACTORS)...... 6
MOUNTINGASSEMBLY(247MODELTRACTORS)...... 7
MAINTENANCE/OPERATION ....................................... 10
REPAIRPARTSLIST..................................................... 11
PARTSORDERING/SERVICE ......................... BackPage
MODELNUMBER:  486.24586
SERIALNUMBER:  __________________
DATEOFPURCHASE: __________________
Themodelnumberandserialnumberswillbefoundon
adecalattachedtotheframe.
Youshouldrecordboththeserialnumberandthedateof
purchaseandkeepinasafeplaceforfuturereference.
WARRANTY
SAFETY
Anypowerequipmentcancauseinjuryifoperatedimproperlyoriftheuserdoesnotunderstandhowtooperatetheequipment.
Exercisecautionatalltimes,whenusingpowerequipment.
• Readthisownersmanualandyourvehicleand
implementownersmanualsbeforeusingthishitch.
• Donotallowchildrentooperatevehicleorsleeve
hitch.
• Donotallowadultstooperatethevehicleorsleeve
hitch without proper instructions.
• Donotallowanyonetorideonsleevehitch.
• Alwaysplacesleevehitchinloweredpositionwhen
attachinganimplement.
• Beforeloweringandoperatingtheimplement,besure
no one is near the area of operation.
• Lowerthesleevehitchandimplementwhenleaving
vehicleunattended.
• Vehiclebrakingandstabilitymaybeaffected.Drive
slowlywhensleevehitchandimplementareinraised
position. Stay off of steep slopes.
• Keepallnutsandboltstightandbesurethe
equipmentisinsafeoperatingcondition. 
Lookforthissymboltopointoutimportantsafetyprecautions.Itmeans—Attention!! Become
alert!! Your safety is involved.
ONE YEAR FULL WARRANTY
Whenoperatedandmaintainedaccordingtotheinstructionssuppliedwithit,ifthisSleeveHitchfailsduetoadefectin
materialorworkmanshipwithinoneyearfromthedateofpurchase,call1-800-4-MY-HOME®toarrangeforfreerepair(or
replacementifrepairprovesimpossible).
Ifthisproductisusedforcommercialorrentalpurposes,thiswarrantyappliesforonly90daysfromthedateofpurchase.
Thiswarrantygivesyouspeciclegalrights,andyoumayalsohaveotherrightswhichvaryfromstatetostate.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
DONOTRETURNTOSTOREforMissingPartsorAssemblyQuestions
Call1-866-576-8388AttachmentHotline
3
Call1-866-576-8388formissingpartsorassemblyhelp
DONOTRETURNTOSTORE
HARDWARE PACKAGE CONTENTS
NOTE:Bolt(C),LockWasher(L)andNut(K)willonlybeusedifthemountingholesinthetractordonotalreadycontain
boltsandnuts.
ACCESSORIES
A B DE
C
H
J
F
G
K
L
M
N
I
O
Q
P
ELECTRIC ASSIST KIT - MODEL 486.24545
Thefollowingaccessoriesarerecommendedforusewithyourunit.Call1-800-4-MY-HOME®tondoutiftheyareavailable.
Ifavailable,theymaybepurchasedatmostCraftsmanoutletsorbycalling1-800-4-MY-HOME®.
REF PART NO. QTY DESCRIPTION
A47947 2 Bolt,Hex5/8-11x2"
B47951 2 Bolt,Hex5/8-11x1-3/4"
C43087 4 Bolt,Hex3/8-16x1-1/4"
D 43063 1HexBolt,5/16-18x1"
E43350 4 Bolt,Carriage3/8-16x1"
FHA3980 3 ClevisPin,5/8"x1-3/4"
G 712-0242 2 HexJamNut,5/8-11
H712-0261 2 NylockNut,5/8-11
I47810 1NylockNut,5/16"
REF PART NO. QTY DESCRIPTION
JHA21362 4 NylockNut,3/8-16
K 43015 4 HexNut,3/8-16
L43003 4 LockWasher,3/8"
M43070 2 FlatWasher
N 23625 1 Spacer
O 25685 1SpacerPlate
P 43343 3 Pin,HairCotter3/32"
Q 714-0117 1Pin,HairCotter,5/32"
4Call1-866-576-8388formissingpartsorassemblyhelp
DONOTRETURNTOSTORE
TOOLS FOR ASSEMBLY
CARTON CONTENTS
1
3
45
6
27
8
REF QTY DESCRIPTION
1 1 SleeveHitchFrameAssembly
2 1 RightMountingBracket
3 1 Left Mounting Bracket
4 4 LiftingLinkPlate
REF QTY DESCRIPTION
5 4 HitchPin
6 1 LiftLeverAssembly(withRightPivotBracket
7 1 LeftPivotBracket
8 1 SleeveHitchLiftAssembly
TOOLS NEEDED FOR ASSEMBLY
(1) 1/2"WrenchorAdjustableWrench
(2) 9/16"WrenchesorAdjustableWrenches
(1) 15/16"WrenchesorAdjustableWrenches
5
Call1-866-576-8388formissingpartsorassemblyhelp
DONOTRETURNTOSTORE
Lookundertheseatofyourtractorandlocatethemodelnumber.Fortractorswithmodelnumbersbeginningwith917,
proceedtoMOUNTINGBRACKETASSEMBLYonpage6.Fortractorswithmodelnumbersbeginningwith247,proceedto
SLEEVEHITCHASSEMBLYonpage7.
193653
®
MODEL
917. 000000
SERIAL
000000A000000
193653
®
MODEL
247. 000000
SERIAL
000000A000000
917 MODEL TRACTORS
GO TO PAGE 6
247 MODEL TRACTORS
GO TO PAGE 7
LOCATE TRACTOR MODEL NUMBER
FIGURE 1
STEP 1: (SEE FIGURE 1)
• Assemblea5/16"x1"hexbolt,aspaceranda5/16"
nylocknuttotheholeintheRightPivotBracket.
5/16" X 1"
HEX BOLT 5/16" NYLOCK
NUT
SPACER
PIVOT
BRACKET
3/8-16 x 1"
CARRIAGE
BOLT 3/8" NYLOCK NUT
LIFT LEVER
ASSEMBLY
SLEEVE HITCH FRAME
LEFT PIVOT BRACKET
RIGHT PIVOT BRACKET
STEP 2: (SEE FIGURE 2)
• PlacetheLeftPivotBracketontotheendoftheLift
LeverAssembly(theRightPivotBracketcomes
alreadyinstalledontheassembly).
• AttachtheRightandLeftPivotBracketstotheSleeve
HitchFrameAssemblyusingfour3/8"x1"carriage
boltsand3/8"nylocknuts.
FIGURE 2
SLEEVE HITCH ASSEMBLY
6Call1-866-576-8388formissingpartsorassemblyhelp
DONOTRETURNTOSTORE
FIGURE 2
LIFT LEVER
ASSEMBLY
SLEEVE HITCH
FRAME ASSEMBLY
WELD
PIN 5/8" NYLOCK NUT
SPACER PLATE
(SEE NOTE)
HEX BOLT
5/8" x 1-3/4"
STEP 1: (SEE FIGURE 2)
• HooktheSleeveHitchFrameassemblyontotheweld
pins.Attachthebottomoftheassemblytothetractor
hitchusinga5/8"x1-3/4"hexboltanda5/8"nylock
nut.
NOTE:Ifyourtractorhitchhasridgesthatpreventthe
sleevehitchassemblyfromrestingat,placethespacer
plateunderneaththesleevehitchassembly.
STEP 2: (SEE FIGURE 2)
• ProceedtoLIFTASSEMBLYinstructionsonpage8.
MOUNTING BRACKET ASSEMBLY
FIGURE 1A
3/8" HEX NUT
3/8" LOCK WASHER
LEFT MOUNTING BRACKET
3/8" x 1-1/4"
HEX BOLT
RIGHT MOUNTING BRACKET
IF YOUR TRACTOR LOOKS LIKE FIGURE 1A
• Installtwo3/8"x1-1/4"hexboltsintheleftsideofthe
tractor as shown. Attach the Left Mounting Bracket
(pinattopfacingin)totheboltsusingtwo3/8"lock
washersand3/8"hexnuts.Repeatontherightside.
FIGURE 1B
ORIGINAL NUT
LEFT MOUNTING
BRACKET
3/8" FLAT WASHER
(TOP HOLE ONLY)
REMOVE NUTS
FROM BOLTS
RIGHT MOUNTING
BRACKET
3/8" LOCK WASHER
(If new bolt and nut are needed)
IF YOUR TRACTOR LOOKS LIKE FIGURE 1B
• Removethenutsfromthetwoboltsshownineach
sideofthetractor,leavingtheboltsinplace.
• AttachtheLeftMountingBracket(pinattopfacing
in)totheboltsusingtheoriginalnutsanda3/8"at
washer.Repeatfortheotherside.
NOTE:Ifnoboltandnutarepresentinahole,usea
3/8"x1-1/4"hexbolt,3/8"lockwasherand3/8"hexnutto
attachtheMountingBrackettothehole.
THIS ASSEMBLY IS FOR 917 TRACTOR MODELS ONLY.
7
Call1-866-576-8388formissingpartsorassemblyhelp
DONOTRETURNTOSTORE
FIGURE 1
STEP 1: (SEE FIGURE 1)
• HooktheSleeveHitchFrameassemblyontothe
shoulderboltsofthetractorframe.Attachthebottom
oftheassemblytothetractorhitchusinga5/8"x
1-3/4"hexboltanda5/8"nylocknut.
STEP 2: (SEE FIGURE 1)
• ProceedtoLIFTASSEMBLYinstructionsonpage8.
LIFT LEVER
ASSEMBLY
SLEEVE HITCH
FRAME ASSEMBLY
SHOULDER
BOLT 5/8" NYLOCK NUT
HEX BOLT
5/8" x 1-3/4"
MOUNTING BRACKET ASSEMBLY
THIS ASSEMBLY IS FOR 247 TRACTOR MODELS ONLY.
8Call1-866-576-8388formissingpartsorassemblyhelp
DONOTRETURNTOSTORE
ASSEMBLY
FIGURE 1
5/8"x 2"
HEX BOLT
5/8" NYLOCK NUT
5/8" JAM NUT
5/8"x 1-3/4"
HEX BOLT
LIFTING LINK
STEP 1: (SEE FIGURE 1)
• Assemblethetwo5/8"jamnutshalfwayontothetwo
5/8"x2"hexbolts.Screwtheboltsintothenutsthatare
weldedtotheSleeveHitchLiftAssembly.Tightenthe
jamnutsagainsttheweldednuts.
• AssembletheLiftingLinktotheSleeveHitchLift
Assemblyusinga5/8"x1-3/4"hexboltanda5/8"
nylocknut.UsethebottomholeintheLiftingLink(gives
thelowestimplementdepthsetting).Tightenthenut
onlyuntilsnug.Donotsqueezeweldedarmstogether.
STEP 2: (SEE FIGURE 2)
• AttachtheSleeveHitchLiftAssemblytotheSleeve
HitchFrameAssemblyusingthree5/8"x1-3/4"clevis
pinsand3/32"haircotterpins.
• InstalltheHitchPininthesleevehitchandsecureit
withthe5/32"haircotterpin.
FIGURE 2
(3) 3/32" HAIR
COTTER PINS
5/32" HAIR
COTTER PIN
HITCH PIN
(3) CLEVIS PINS
LIFT ASSEMBLY
9
Call1-866-576-8388formissingpartsorassemblyhelp
DONOTRETURNTOSTORE
NOTES
10 Call1-866-576-8388formissingpartsorassemblyhelp
DONOTRETURNTOSTORE
• Cleanoffaftereachuse.
• Oilpivotpointsasneeded.
• Storeinadrylocation.
MAINTENANCE
• Movetheliftleverbackwardtolowerthesleevehitch.
• Attachanimplementusingthesleevehitchpin.
Tightenthe5/8"x2"stabilizerboltsagainstthe
implementhitchandthentightenthejamnuts.See
Figure5onPage5.
IMPORTANT:Someimplementsmayrequirethatthe
stabilizerboltsnotbetightened.Refertoyourimplement
owner'smanual.
• Thesleevehitchisassembledinthelowestposition
byfollowingtheassemblyinstructions.Ifthe
implementattachedtothesleevehitchisnotlevel
fronttobackduringoperation,movethehexbolttoa
differentholeintheliftinglink(3holesavailable)that
givesbetterleveling.
OPERATION
• Totowanimplementthathasatowhitch,simply
removethreeclevispinsandthenremovetheSleeve
HitchLiftAssemblyfromtheSleeveHitchFrame
Assembly.
• ToremovetheentireSleeveHitchattachment,
removethe5/8"x1-3/4"hexboltand5/8"nylocknut
whichfastenthebottomofthesleevehitchtothe
tractorhitch,thenlifttheattachmentoffthetractor.
11
Call1-866-576-8388formissingpartsorassemblyhelp
DONOTRETURNTOSTORE
REF PART NO. QTY DESCRIPTION
1 67054 1SleeveHitchFrame
2 25715 1PivotBracket,Left
3 25714 1PivotBracket,Right
4 43350 4 Bolt,Carriage3/8-16x1"
5 HA21362 4 HexLockNut,3/8-16
6 65404 1SleeveHitchLiftAssembly
7 64625 1LiftLeverAssembly
8 24732 1LiftingLinkPlate
9 47947 2 Bolt,Hex5/8-11x2"
10 712-0242 2 HexJamNut,5/8-11
11 HA3980 3 ClevisPin,5/8"x1-3/4"
12 47951 2 Bolt,Hex5/8-11x1-3/4"
13 712-0261 2 NylockNut,5/8-11
14 47950 1Pin,SleeveHitch
REF PART NO. QTY DESCRIPTION
15 43343 3 Pin,HairCotter3/32"
16 46471 1Grip,Plastic
17 43063 1Bolt,5/16-18x1"
18 23625 1 Spacer
19 47810 1NylockNut,5/16"
20 65370 1MountingBracket,Right
21 65369 1 Mounting Bracket, Left
22 714-0117 1Pin,HairCotter,5/32"
23 25685 1SpacerPlate
24 43070 2 FlatWasher
25 43087 4 Bolt,Hex3/8-16x1-1/4"
26 43003 4 LockWasher,3/8"
27 43015 4 HexNut,3/8-16
41362 1Owner'sManual
REPAIR PARTS FOR MODEL 486.24586 SLEEVE HITCH
27
1
4
2
5
6
7
8
11
11
11
12
12
13
14
15
15
22
15
16
A
A
17
18 19
3
21
20
25
26
24
9
10
13
23
ASSEMBLY
PARTS
® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC
® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC
MC Marque de commerce / MD Marque déposée de Sears Brands, LLC © Sears Brands, LLC
Get it fixed, at your home or ours!
Your Home
For expert troubleshooting and home solutions advice:
www.managemyhome.com
For repair – in your home – of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner’s manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME®(1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
www.sears.com www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of your nearest
Sears Parts & Repair Service Center
1-800-488-1222 (U.S.A.) 1-800-469-4663 (Canada)
www.sears.com www.sears.ca
To purchase a protection agreement on a product serviced by Sears:
1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)
Para pedir servicio de reparación
a domicilio, y para ordenar piezas:
1-888-SU-HOGAR®
(1-888-784-6427)
Au Canada pour service en français:
1-800-LE-FOYERMC
(1-800-533-6937)
www.sears.ca
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Craftsman 486.24586 User manual

Category
Lawnmowers
Type
User manual

Craftsman 486.24586 is a Sleeve Hitch attachment for “Garden Tractors” that have rear tires 23” or larger. It’s not designed to fit or be used on “Yard Tractors” or “Lawn Tractors” that have rear tires 22” or smaller.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI