0.7 LED Alarm Clock Instruction Manual
Model: 30227/20228
OPERATION
Plug the cord into any l l0/I20V 60Hz AC outlet. The entire display may flash on and off. This is normal and will stop when the time is
set.
REMOVE THE DISPLAY PROTECTING STICKER BEFORE SETTING THE CLOCK.
SETTING THE TIME
1. Turn the rotary switch to Time Set.
2. Depress the Hour button to set the hour digit to the correct hour. REMEMBER to set the correct AM or PM (PM light indicator will
light up for PM time.)
3. Depress the Minute button to set the digit to correct minute.
4. After correct time has been set, turn the rotary switch to Alarm Off.
SETTING THE ALARM TIME
1. Turn the rotary switch to Alarm Set.
2. Depress the Hour button to set to the designated alarm hour. REMEMBER to set the correct AM or PM (PM light indicator will
light up for PM time.)
3. Depress the Minute button to set to the designed alarm minute.
4. After the designated alarm time has been set, turn the rotary switch to Alarm On to enable the alarm.
SNOOZE REPEAT ALARM OPERATION
When the alarm sounds; simply
depress the Snooze button to silence the alarm for approximately 9 minutes. This can be repeated
as often as you wish for up to two hours. To shut the alarm off, turn the rotary switch to Alarm Off.
BATTERY BACKUP
Open the battery compartment and install a 9V battery (not included) to backup the correct time during any power interruption. The
display will not remain lit but the alarm operation will remain in normal operation. The correct time in the clock can be kept for
several hours depending on the condition of the alarm operation. When the power is restored, the display will be resumed and all
the previous settings will remain. If the backup battery is not installed, all the setting will need require reset.
NOTE: For the best performance, Alkaline battery is recommended and it needs to be replaced annually to ensure the backup
facility. Please help in preservation of the environment and return the used batteries to authorized depot.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
Two Year Warranty (U.S.A.)
Equity products are warranted for two years from the date of consumer purchase against defects in material and workmanship.
During this period such defects will be repaired, or the product will be replaced at Equity’s option. This warranty does not cover
damage caused by misuse or negligence. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR
FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD ENDING TWO YEARS FROM DATE OF PURCHASE. Some
states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you. This warranty
gives you specific legal rights and you may also have other rights which vary from State to State.
If your product is not working properly, please send:
- The Product
- a letter explaining the problem
- and $5.00 for postage and handling to:
Equity Warranty Dept.
2817 Losey Blvd. S
La Crosse, WI 54601
For Customer Support, visit:
www.equitybylacrosse.com/support
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
