2. Steelcase
  3. CF Series Flat Panel Monitor Arms
CF Series Flat Panel Monitor Arms

Steelcase CF Series Flat Panel Monitor Arms Assembly Instructions

  • Hello! I am an AI chatbot trained to assist you with the Steelcase CF Series Flat Panel Monitor Arms Assembly Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3/32"
7 8
HI
4
E
F
CF Series Flat Panel Monitor Arms
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
© 2015 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
®
Page 1 of 3
19321701 Rev J
AB
CD
C
C
CD
D
D
321
CF450
CF500
CF800
CF1000
65
GG
CF600
Page 2 of 3
19321701 Rev J
®
Flat Screen Monitor Arm
Parts List
CF Series Flat Panel Monitor Arms
A
B
C
D
E
ITEM DESCRIPTION / PART NO. QUANTITY
Sloped Tilter
405397
1
75mm and 100mm VESA® Adapter Plate
105587
1
#10-32 x 3/8" Phillips Pan Head Screw
702281
1(4-pack)
M4-12 Phillips Pan Head Screw (4-Pack)
702096
1
Dog Washer
105189
1
#10-32 x 3/8" FPhMS with Lock Patch
705198
701127
3/32" Allen Wrench
700146
Cable Cap
114810
7/32" Allen Wrench
F
G
H
I
ITEM DESCRIPTION / PART NO. QUANTITY
1
1
1
1
Page 3 of 3
19321701 Rev J
®
CF Series Flat Panel Monitor Arms
How to Counterbalance the Arm
1/8" Allen Wrench
7/32" Allen Wrench
Press the arm down to approximately
parallel with the desk prior to turning
the strength adjustment screw.
In some instances, further counter-
balance adjustments are needed to
allow the arm’s instant height
adjustment function to work properly.
If the arm does not remain in
position after performing step 1,
follow these steps:
If the arm drifts upward, turn the adjustment
screw clockwise.
If the arm drifts downward, turn the adjustment
screw counter-clockwise.
With the arm in horizontal position, tighten button
head screw.
Do not overtighten screws.
Depending on the weight of your monitor, you
may need to make 15 -20 turns.
IMPORTANT!
Monitor must be on arm
Arm must be in mount
1
2
/