Eagle Group OTR-2820-A/W Datasheet

Type
Datasheet

This manual is also suitable for

Eagle Group OTR-2820-A/W is a double-tier oval tray rack with a width of 30", a depth of 27", and a height of 670 mm. It is constructed of 1" square tubular aluminum frame and supports, with each frame and cross support junction joined with a two-piece aluminum gusset riveted to the frame. A 1" square tubing reinforcing bar between the frames provides added rigidity. The rack features 37⁄16"-wide aluminum tray slides with a beaded edge to minimize friction. The slide spacing is 8" to accommodate 20 oval trays measuring 23" x 28".

Eagle Group OTR-2820-A/W is a double-tier oval tray rack with a width of 30", a depth of 27", and a height of 670 mm. It is constructed of 1" square tubular aluminum frame and supports, with each frame and cross support junction joined with a two-piece aluminum gusset riveted to the frame. A 1" square tubing reinforcing bar between the frames provides added rigidity. The rack features 37⁄16"-wide aluminum tray slides with a beaded edge to minimize friction. The slide spacing is 8" to accommodate 20 oval trays measuring 23" x 28".

Foodser
vice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG60.09B Rev. 08/08
Catalog Specification Sheet No.
EG60.09B
Panco
®
Oval Tray Racks—Horizontal Storage
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Options / Accessories
Casters with locking brakes
Rotary donut bumpers
V
ertical corner bumpers
Perimeter bumper
Pan stops
Eagle Foodser
vice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
Panco
®
Oval Tray Racks
—Horizontal Storage
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature librar
y at
www
.eaglegrp.com
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: [email protected]
MODELS:
OTR-2810-A/W
OTR-2820-A/W
Certifications / Approvals
Features on all models
• Frame and support: 1˝ (25mm) square aluminum tubing
with 0.063˝-thick wall.
• Gussets: Each frame and cross support junction shall be
joined with a two-piece, die-stamped 0.100˝-thick aluminum
gusset, riveted to the tubing frame and cross support.
• Reinforcing bar: 1˝ (25mm) square tubing, at middle of
height, between frames, for added rigidity.
• Tray slides: 0.100˝-thick aluminum formed to 3
7
16˝ (87mm)
wide lip with a beaded edge, for strength and minimum
friction. Slides are riveted to frame.
• Casters: 5˝ (127mm)-diameter NSF-approved, non-marking
rubber tired wheels on swivel stem plated casters.
Short Form Specifications
Eagle Panco
®
Oval Horizontal T
ray Storage Rack, model
_______________. Constructed of 1˝ square tubular
aluminum frame and supports with each frame and cross
support junction joined with a two-piece aluminum gusset
riveted to the frame. 1˝ square tubing reinforcing bar between
frames for added rigidity. 3
7
16˝-wide aluminum tray slides with
beaded edge to minimize friction. Slide spacing to be 6˝ or 8˝
to accommodate (10 or 20) 23˝ x 28˝ oval trays. Furnished
with 5˝-diameter casters. Shipped assembled.
model #OTR-2810-A/W
oval tray rack
Spec sheets available for viewing, printing or downloading from our online literature librar
y at
www
.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order
.
Catalog Specification Sheet No.
EG60.09B
Panco
®
Oval Tray Racks—Horizontal Storage
Item No.:
Project No.:
S.I.S. No.:
Rev. 08/08
Printed in U.S.A.
©2008 by Eagle Group
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www
.eaglegrp.com
overall dimensions sliding
width depth height weight space tray
model #
description
in.
mm
in.
mm
in. mm lbs. kg in. mm capacity
O
TR-2820-A/W
single-tier
30˝
762
26
3
8˝
670
69˝
1753
28 12.7 6 152 10
O
TR-2820-A/W
doub
le-tier
27˝ 686 29
1
2˝
749
72
1
8˝
1832
35 15.9 3 76 20
Panco
®
Oval Tray Racks—Horizontal Storage
(model #OTR-2810-A/W)
TOP VIEW
FRONT VIEW SIDE VIEW
  • Page 1 1
  • Page 2 2

Eagle Group OTR-2820-A/W Datasheet

Type
Datasheet
This manual is also suitable for

Eagle Group OTR-2820-A/W is a double-tier oval tray rack with a width of 30", a depth of 27", and a height of 670 mm. It is constructed of 1" square tubular aluminum frame and supports, with each frame and cross support junction joined with a two-piece aluminum gusset riveted to the frame. A 1" square tubing reinforcing bar between the frames provides added rigidity. The rack features 37⁄16"-wide aluminum tray slides with a beaded edge to minimize friction. The slide spacing is 8" to accommodate 20 oval trays measuring 23" x 28".

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI