Victory RS-2N-S7-FF Datasheet

Type
Datasheet

This manual is also suitable for

Shallow Depth Fish File Refrigerators
Cabinet:
Victory’s fish file 40°F refrigerator provides
storage of fresh seafood in easy to reach
stainless steel drawers. Each cabinet is
internally supported, braced and assembled
into a single rigid unit. The cabinet front and
drawers are constructed of heavy gauge
polished stainless steel to maintain an
attractive appearance after years of heavy
use. Foamed-in-place polyurethane
insulation throughout the cabinet ensures
the ultimate in energy efficiency.
Drawers:
Heavy-duty drawers have safety grip
handles and self adjusting magnetic
gaskets. Drawer runners are of heavy gauge
steel with anti-friction action. Drawer pan
internal dimensions are 14
3
/
4
” x 19
3
/
4
”long
and 6” deep (supplied by Victory).
Refrigeration System:
All components of the self-contained
refrigeration system are mounted on top of
the cabinet. The air circulating fans and the
forced convection cooling coil are contained
within a ceiling mounted low profile housing.
A drain in the lower compartment bottom
terminates waste water in a 1” male pipe
fitting for connection to a floor drain.
Plumbing is required.
NOTE: Cooling coil is contained within a
ceiling mounted low profile housing
Standard Features
• Digital Thermometer/Battery Back-up
• Energy Saver Switch
• Stainless Steel Case Front, Sides and Interior
• Stainless Steel Drawers with Self Adjusting
Magnetic Gaskets
• Adjustable Stainless Steel Legs
• Lifetime Safety Grip Handles
• Plasticized Fin Coil
• Environmentally Friendly R-134a Refrigerant
• Cord and Plug Attached on 115V Models 12
Amps or Less
• Floor Drain
Optional Features and Accessories
• Dial Thermometer
• Locks for Drawers
• 5” Diameter Heavy-Duty Swivel Casters with
Brakes
• Stainless Steel Case Back
• Remote Models
RS-1N-S7-FF
RS-2N-S7-FF
RS MODELS —
Stainless steel
exterior and interior.
RS-1N-S7-FF
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail: sales@victory-refrig.com
Victory Refrigeration specification sheets
are available online at www.victory-refrig.com.
Approvals:
Project:
Location:
Item #:
Quantity:
Remote Models Available
CHARACTERISTICS ONE SECTION TWO SECTION
Width, Overall 26
1
/
2
52
1
/
8
Depth, Overall (incl. handles) 29
7
/
8
29
7
/
8
Height, Overall (incl. adj. legs) 84 84
Total Capacity of Drawers (cubic Feet) 4 8
No. of Drawers 4 8
Drawer Pan - Width 14
3
/
4
14
3
/
4
Drawer Pan - Depth 19
3
/
4
19
3
/
4
Drawer Pan - Height 6 6
Cabinet Voltage 115/60/1 115/60/1
Feed Wires 2 2
Condensing Unit Voltage 115/60/1 115/60/1
Condensing Unit Size (HP)
1
/
4
1
/
3
Total Amperes 8.0 11.3
Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include
standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.
Continuous product development may necessitate specification changes and design without notice.
Victory Refrigeration, Inc. Shallow Depth Fish File Refrigerators
Crated dim. & wts.
Ht. Width Depth Cu.Ft. Lbs
One Section 82 36
1
/
2
44
3
/
4
77.5 565
Two Section 87 63
5
/
8
44
3
/
4
135.1 845
FOR REMOTE MODELS– Substitute an “R” for the “S” in suffix. For
example: Model RS-1N-S7-FF (self-contained) would be RS-1N-R7-FF
remote cabinet. Air circulating fans, expansion valve and plasticized
coil are provided. Condensing units not supplied. The following units
are recommended with
1
/
2
” O.D. Suction line,
1
/
4
” O.D. Liquid line.
Dimensional tolerance ±
1
/
4
” Metric dimensions (MM)
REMOTE REFRIGERATION
Cond. Unit BTUH Cabinet Amps
One Section
1
/
4
H.P. 2030 115/60/1 2.5
Two Section
1
/
3
H.P. 2540 115/60/1 3.4
Copyright June 2009
Printed in U.S.A. 063009
29.88
(758)
22.50
(571)
19.75
(502)
9.62
(245)
TYP OPN'G
13.12
(333)
26.38
(670)
28.38
(720)
6.00
(152)
DRAWER PAN
14.12
(358)
21.12
(537)
TYP OPN'G
13.25
(336)
6.00
(152)
26.50
(660)
84.00
(2133)
TOP VIEW TOP VIEW
FRONT VIEW FRONT VIEW SIDE VIEW
CORD & PLUG
1.00" (25) NPT WASTE DRAIN
CONNECTION TO FLOOR DRAIN
INTERIOR COIL
48.12
(1222)
29.88
(758)
84.00
(2133)
6.00
(152)
21.12
(537)
TYP OPN'G
52.13
(1324)
26.06
(662)
CORD & PLUG
1.00" (25) NPT WASTE DRAIN
CONNECTION TO FLOOR DRAIN
INTERIOR COIL
NOTE: If cabinet is located
directly against wall an all
around clearance of 2” is
required, and a minimum
clearance of 10” under
ceiling.
We reserve the right to
change specifications and
product design without
notice. Such revisions do
not entitle the buyer to
corresponding changes,
improvements, additions or
replacements for previously
purchased equipment.
  • Page 1 1
  • Page 2 2

Victory RS-2N-S7-FF Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI