HIP (SIB STAND) USER MANUAL
Notice Hip (Pied Sib)
A B C D E F G H I
C
E
4
G
H
3
C
65
Accessories
Accessoires
1 Assembly the base and the stand
using the hex key supplied with Sib.
Assemblez la base et le pied à l’aide
de la clé fournie avec Sib.
2 Insert the cable inside the stand and
through the holes.
Insérez le câble dans le passage de
câble de Hip.
3 Place the eyelets as indicated on
the drawing.
Insérez les œillets dans le passagede câble
comme indiqué sur le schéma.
4 Place the upper cap.
Posez le bouchon supérieur.
5 Unscrew the 2 fixing clamps and remove
the base of the Sib.
Dévissez les 2 vis serrant les mâchoires
et retirez la base de Sib.
6 Place Sib on the support piece and
tightly screw the clamps.
Mettez en place Sib sur la rotule de Hip
et serrez fort les mâchoires.
7 Connect the cables.
Branchez les câbles.
8 Stick the rubber feet (supplied)
under the base of the stand, if placed on
fragile floors.
Si le sol est fragile : posez les 6 pastilles
(fournies).
7 8
F
C
2
C
A
B
I
1
A
D
C
SCAB_150929/4_codo1334
Due to constant technological advances, Focal-JMlab
®
reserves its right to modify specifications without notice. Images may not conform exactly to specific product.
Dans un but d’évolution, Focal-JMlab
®
se réserve le droit de modifier les spécifications techniques; Photos non contractuelles.
-
1
Focal PACK DEUX STAND HIP JET BLACK User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
Other documents
-
Juniper QFX10016 User manual
-
-
Abbott ARCHITECT RHS Training manual
-
Juniper TX Matrix RE-1600 User manual
-
-
Juniper J2350-SSG350M-RMK-19 User manual
-
-
-
-