Miller LK000000 Owner's manual

Brand: Miller

Model: LK000000

Category: Welding System

Type: Owner's manual

This manual is also suitable for

ARCSTATION WELD TABLE - 60SX

Miller LK000000 is a welding table that offers a sturdy and versatile platform for welding projects. It features a heavy-duty steel construction with a 3000-pound weight capacity, making it ideal for supporting even the largest and heaviest projects. The table's modular design allows for easy assembly and customization, with various accessories and attachments available to suit different welding needs. The LK000000 is also equipped with leveling feet for precise positioning and stability on uneven surfaces.

ArcStation 60SX

OM-244997D 2018−12



Place serial number or

lot code sticker here.

For product information,

Owner’s Manual translations,

and more, visit

www.MillerWelds.com

File: Accessory

Miller Electric manufactures a full line

of welders and welding related equipment.

For information on other quality Miller

products, contact your local Miller distributor to receive the latest full

line catalog or individual specification sheets. To locate your nearest

distributor or service agency call 1-800-4-A-Miller, or visit us at

www.MillerWelds.com on the web.

Thank you and congratulations on choosing Miller. Now you can

get the job done and get it done right. We know you don’t have

time to do it any other way.

That’s why when Niels Miller first started building arc welders in

1929, he made sure his products offered long-lasting value and

superior quality. Like you, his customers couldn’t afford anything

less. Miller products had to be more than the best they could be.

They had to be the best you could buy.

Today, the people that build and sell Miller products continue the

tradition. They’re just as committed to providing equipment and

service that meets the high standards of quality and value

established in 1929.

This Owner’s Manual is designed to help you get the most out of

your Miller products. Please take time to read the Safety

precautions. They will help you protect yourself against potential

hazards on the worksite. We’ve made installation and operation

quick and easy. With Miller you can count on years of reliable

service with proper maintenance. And if for some reason the unit

needs repair, there’s a Troubleshooting section that will help you

figure out what the problem is. The parts list will then help you to

decide the exact part you may need to fix the problem. Warranty

and service information for your particular model are also provided.

Working as hard as you do

− every power source from

Miller is backed by the most

hassle-free warranty in the

business.

From Miller to You

Mil_Thank2

2017−07

TABLE OF CONTENTS

SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING 1..................................

1-1. Symbol Usage 1........................................................................

1-2. Welding Table Hazards 1................................................................

1-3. Proposition 65 Warnings 1...............................................................

1-4. Principal Safety Standards 1.............................................................

SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION 2............................

2-1. Symboles utilisés 2.....................................................................

2-2. Dangers liés à la table de soudure 2.......................................................

2-3. Proposition californienne 65 Avertissements 2...............................................

2-4. Principales normes de sécurité 2..........................................................

SECTION 3 − ASSEMBLY 3.....................................................................

3-1. Hardware Description 3..................................................................

3-2. 60SX Welding Table Specifications 4.......................................................

3-3. Parts Layout 4.........................................................................

3-4. 60SX Welding Table Assembly 4..........................................................

A. Tools Needed 4.......................................................................

B. Table Tops 5..........................................................................

C. Support Rails 5.......................................................................

D. Center Subframe And End Subframes 6..................................................

E. Connecting Center And End Subframes To Rails And Installing Leveling Feet 7..................

F. Installing Bottom Trays 8...............................................................

G. Rotating Welding Table Upright 8........................................................

H. Installing Stiffener Brackets And Work Lead Tab 9..........................................

I. Grounding The Welding Table 9..........................................................

WARRANTY

OM-244997 Page 1

SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING

weld table_2018-01

Protect yourself and others from injury — read, follow, and save these important safety precautions and operating instructions.

1-1. Symbol Usage

DANGER! − Indicates a hazardous situation which, if

not avoided, will result in death or serious injury. The

possible hazards are shown in the adjoining symbols

or explained in the text.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury. The possible

hazards are shown in the adjoining symbols or ex-

plained in the text.

NOTICE − Indicates statements not related to personal injury.

. Indicates special instructions.

This group of symbols means Warning! Watch Out! ELECTRIC

SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult sym-

bols and related instructions below for necessary actions to avoid the

hazards.

1-2. Welding Table Hazards

Only qualified persons should install, operate, maintain, and repair this equipment. A qualified person is defined as one who, by pos-

session of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training and experience, has

successfully

demonstrated ability to solve or resolve problems relating to the subject matter, the work, or the project and has received

safety training to recognize and avoid the hazards involved.

READ INSTRUCTIONS.

D Read and follow all labels and the Owner’s

Manual carefully before installing, operating, or

servicing unit. Read the safety information at

the beginning of the manual and in each

section.

D Use only genuine replacement parts from the manufacturer.

D Perform installation, maintenance, and service according to the

Owner’s Manuals, industry standards, and national, state, and

local codes.

D Do not repair, modify, or disassemble the weld table or use with

parts or accessories not supplied by the manufacturer. Use only

approved components and accessories from the manufacturer.

D Be sure all hardware is properly tightened.

D Do not use the welding table until you are sure it is correctly as-

sembled and working properly.

D Before each use, inspect the weld table for damage and verify it

is secure and installed properly.

ELECTRIC SHOCK can kill.

Touching live electrical parts can cause fatal shocks

or severe burns.

D Incorrectly installed or improperly grounded

equipment is a hazard. Properly install,

ground, and operate this equipment according to its Owner’s Manual

and national, state, and local codes. Also read American National

Standard Z49.1, Safety in Welding, Cutting, and Allied Processes,

from American Welding Society (www.aws.org).

FIRE OR EXPLOSION hazard.

D Do not install or place unit on, over, or near

combustible surfaces.

D Do not install unit near flammables.

D Use the welding table only for the recommended application.

Do not use the welding table for non-welding operations, such as

painting, sawing wood, or any activity that could produce flam-

mable materials.

D Before each use, empty the debris in the collection tray into a fire-

proof container.

FALLING EQUIPMENT can injure.

D Do not exceed the maximum weight rating of

welding table, drawers, or shelves (see Spe-

cifications). Spread weight evenly on welding

table, and in drawers and shelves. Do not use

the welding table, tray, drawers, or shelves to

stand on or support heavy equipment.

D Use correct procedures and equipment of adequate capacity to

lift and support unit.

D If using lift forks to move unit, be sure forks are long enough to

extend beyond opposite side of unit.

D Do not use powered equipment to drag unit.

D Do not move or install welding table where it could tip. Install the

welding table on a firm, level surface and away from flammable

materials. Lock wheels to keep table in position.

D Follow the guidelines in the Applications Manual for the Revised

NIOSH Lifting Equation (Publication No. 94−110) when manu-

ally lifting heavy parts or equipment.

1-3. Proposition 65 Warnings

WARNING: Cancer and Reproductive Harm − www.P65W

arnings.ca.gov

1-4. Principal Safety Standards

Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,

is available as a free download from the American Welding Society at

http://www.aws.org or purchased from Global Engineering Documents

(phone: 1-877-413-5184, website: www

.global.ihs.com).

Applications Manual for the Revised NIOSH Lifting Equation, The Na-

tional Institute for Occupational Safety and Health (NIOSH), 1600

Clifton Rd, Atlanta, GA 30329-4027 (phone: 1-800-232-4636, website:

www.cdc.gov/NIOSH).

OM-244997 Page 2

SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT

UTILISATION

weld table_2018-01_fre

Pour écarter les risques de blessure pour vous−même et pour autrui — lire, appliquer et ranger en lieu sûr ces consignes relatives

aux précautions de sécurité et au mode opératoire.

2-1. Symboles utilisés

DANGER! − Indique une situation dangereuse qui si on

l’évite pas peut donner la mort ou des blessures graves.

Les dangers possibles sont montrés par les symboles

joints ou sont expliqués dans le texte.

Indique une situation dangereuse qui si on l’évite pas

peut donner la mort ou des blessures graves. Les dan-

gers possibles sont montrés par les symboles joints ou

sont expliqués dans le texte.

AVIS − Indique des déclarations pas en relation avec des blessures

personnelles.

. Indique des instructions spécifiques.

Ce groupe de symboles veut dire Avertissement! Attention! DANGER

DE CHOC ELECTRIQUE, PIECES EN MOUVEMENT, et PIECES

CHAUDES. Consulter les symboles et les instructions ci-dessous y

afférant pour les actions nécessaires afin d’éviter le danger.

2-2. Dangers liés à la table de soudure

L’installation, l’utilisation, l’entretien et les réparations ne

doivent être confiés qu’à des personnes qualifiées. Une

personne qualifiée est définie comme celle qui, par la

possession

d’un diplôme reconnu, d’un certificat ou d’un

statut professionnel, ou qui, par une connaissance, une for-

mation et une expérience approfondies, a démontré avec

succès sa capacité à résoudre les problèmes liés à la tâche,

le travail ou le projet et a reçu une formation en sécurité afin

de reconnaître et d’éviter les risques inhérents.

LIRE LES INSTRUCTIONS.

D Lire et appliquer les instructions sur les

étiquettes

et le Mode d’emploi avant l’instal-

lation, l’utilisation ou l’entretien de l’appareil.

Lire les informations de sécurité au début du

manuel et dans chaque section.

D N’utiliser que les pièces de rechange recommandées par le

constructeur.

D Effectuer l’installation, l’entretien et toute intervention selon les

manuels d’utilisateurs, les normes nationales, provinciales et de

l’industrie,

ainsi que les codes municipaux.

D Ne pas réparer. modifier ou démonter la table de soudure ou l’utiliser

avec des pièces ou accessoires non fournis par le fabricant. Utiliser

uniquement des composants approuvés par le fabricant.

D S’assurer que toute la quincaillerie est bien serrée.

D Ne pas utiliser la table de soudure avant d’être certain qu’elle est

bien montée et qu’elle fonctionne correctement.

D Avant chaque utilisation, inspecter la table de soudure pour

déceler tout signe de dommage et s’assurer qu’elle est bien

installée et maintenue correctement.

UNE DÉCHARGE ÉLECTRIQUE peut

entraîner la mort.

Le contact d’organes électriques sous tension peut

provoquer des accidents mortels ou des brûlures

graves.

D Un appareil mal installé ou mal raccordé à la terre est dangereux.

Installer, mettre à la terre et utiliser correctement cet appareil,

conformément

à son manuel d’utilisation et aux codes nationaux,

provinciaux et municipaux. Lire également la norme Z49.1 de

l’American National Standard Institute (ANSI), Safety in Welding,

Cutting, and Allied Processes, (Règles de sécurité en soudage,

coupage et procédés connexes) de l’American Welding Society

(www.aws.org).

Risque D’INCENDIE OU D’EXPLOSION.

D Ne pas placer l’appareil sur, au-dessus ou

à proximité de surfaces inflammables.

D Ne pas installer l’appareil à proximité de pro-

duits inflammables.

D Utiliser uniquement la table de soudure pour ce dont elle est

conçue. Ne pas utiliser la table de soudure pour des tâches qui

ne sont pas liées à la soudure, comme la peinture, la coupe du

bois ou toute autre activité qui pourrait produire des matières in-

flammables.

D Avant chaque utilisation, vider les débris du plateau collecteur

dans un contenant à l’épreuve des flammes.

LA CHUTE DE L’ÉQUIPEMENT peut

provoquer des blessures.

D Ne pas dépasser les limites de poids de la

table de soudure, des tiroirs ou des étagères (se

reporter à la fiche technique). Distribuer le poids

de manière uniforme sur la table de soudure, dans les tiroirs et sur les

étagères. Ne pas utiliser la table de soudure, le plateau, les tiroirs ou

les étagères pour soutenir de l’équipement lourd.

D Utilisez les procédures correctes et des équipements d’une ca-

pacité appropriée pour soulever et supporter l’appareil.

D En utilisant des fourches de levage pour déplacer l’unité, s’assu-

rer que les fourches sont suffisamment longues pour dépasser

du côté opposé de l’appareil.

D Ne pas utiliser d’équipement motorisé pour tirer l’unité.

D Ne pas déplacer ou installer la table de soudure à un endroit où

elle pourrait se renverser. Installer la table de soudure sur une

surface ferme et de niveau, loin des matières inflammables.

Verrouiller les roues pour maintenir la table en position.

D Suivre les consignes du Manuel des applications pour l’équation

de levage NIOSH révisée (Publication Nº94–110) lors du levage

manuelle de pièces ou équipements lourds.

2-3. Proposition californienne 65 Avertissements

AVERTISSEMENT : cancer et troubles de la reproduction − www.P65W

arnings.ca.gov

2-4. Principales normes de sécurité

Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,

is available as a free download from the American Welding Society at

http://www.aws.org or purchased from Global Engineering Documents

(phone: 1-877-413-5184, website: www

.global.ihs.com).

Applications Manual for the Revised NIOSH Lifting Equation, The Na-

tional Institute for Occupational Safety and Health (NIOSH), 1600

Clifton Rd, Atlanta, GA 30329-4027 (phone: 1-800-232-4636, website:

www.cdc.gov/NIOSH).

OM-244997 Page 3

SECTION 3 − ASSEMBLY

3-1. Hardware Description

247 341-A

OM-244997 Page 4

3-2. 60SX Welding Table Specifications

Total Maximum Load Capacity Maximum Shelf Load Capacity Maximum Tool Chest Drawer

Capacity (Each Drawer)

1000 lb (454 kg) 100 lb (45 kg) 40 lb (18 kg)

3-3. Parts Layout

1 300 606 Top, solid 3/8 in. thick (1)

300 607 Top, X-pattern 3/8 in. thick (1)

2 244 936 Subframe, end (2)

3 244 965 Foot, mtg (6)

4 244 935 Subframe, center (1)

5 244 949 Front/Rear Rail (4)

6 244 950 Tray, bottom (2)

7 245 618 Bracket, stiffener (2)

8 245 672 Cap, tube small (4)

9 245 673 Cap, tube large (2)

10 245 874 Tab, work lead (1)

244 952 Hardware (1)

3-4. 60SX Welding Table Assembly

A. Tools Needed

1/2 in.

hex bit 3/16 in.

hex wrench 3/16 in.

level

OM-244997 Page 5

B. Table Tops

1 Table Tops

Wipe off rust inhibitor from table

tops.

Place table tops flat on the floor.

. Tops for 60SX model are

shown; solid tops use the same

tapped hole layout.

. X-pattern top can be on either

side. Check the following

instructions to be sure how

tops will be positioned after

assembly.

Use a mallet to tap tops together so

they touch at the center.

Four holes must be

together in center of tops.

Tools Needed:

C. Support Rails

1 Tapped Holes For Front/Rear

Rails

2 Front/Rear Rails

Place four front/rear rails on table

tops as shown, but do not fasten

rails to tops yet.

Bottom View

OM-244997 Page 6

D. Center Subframe And End Subframes

1 Tapped Holes For Center

Subframe And End

Subframes

2 Center Subframe

3 End Subframes

Place center and end subframes on

table top as shown. Fasten one

subframe at a time to ease

installation.

Table top hardware will

be used at this point.

Use eight bolts CC and eight

washers WW. Install bolts into table

top ends.

Use eight bolts AA and eight

washers WW. Install bolts into

slotted holes for the center and end

subframes and rails.

Tighten all bolts.

Tools Needed:

hex bit 3/16 in.

CC and WW

AA and WW

Bottom View

OM-244997 Page 7

E. Connecting Center And End Subframes To Rails And Installing Leveling Feet

1 Center Subframe

2 End Subframes

Use 16 bolts AA and 16 locknuts ZZ

at each angle bracket as shown to

connect center and end subframes

and rails.

Tighten all bolts and locknuts.

3 Leveling Foot

Install six leveling feet to bottom of

leg assembly tubes.

Do not tighten leveling feet at this

time.

Tools Needed:

AA and ZZ

1/2 in.

hex bit 3/16 in.

OM-244997 Page 8

F. Installing Bottom Trays

! Use two people to rotate

welding table.

It is recommended that a piece of

cardboard be placed on the floor to

prevent damaging the finish on the

end subframes. Rotate the welding

table on its side as shown.

. Install shelves so that the wider

flange is on the end subframe

and the narrower flange is on

the center subframe.

Use four bolts AA and four locknuts

ZZ to install shelves to bottom

brackets of the center and end

subframes.

Use two bolts EE and locknuts ZZ

to fasten trays to the center

subframe.

Tighten all bolts and locknuts.

Proceed to Subsection G.

Tools Needed:

1/2 in.

hex bit 3/16 in.

AA and ZZ

EE and ZZ

AA and ZZ

G. Rotating Welding Table Upright

! Use two people to rotate

welding table.

Rotate the welding table to its

upright position.

OM-244997 Page 9

H. Installing Stiffener Brackets And Work Lead Tab

1 Stiffener Brackets

Use three bolts EE and three

locknuts ZZ and install two cross

members to rear of center and end

subframes.

2 Tapped Holes For Work Lead

Ta b

3 Work Lead Tab

Attach work lead tab with one bolt

DD to bottom side and at the rear of

the tops using any one of the four

tapped holes.

4 Leveling Foot (6)

. To level the 60SX, adjust

leveling feet for the center

subframe first. Then adjust

leveling feet for the end

subframes.

Adjust leveling feet until the welding

table is stable and the tops are

level. Do not tighten jam nuts on

feet at this time.

After setting the welding table in

place, make final adjustments to

leveling feet keeping the tops level

and the feet solid on the floor.

Tighten jam nuts on feet at this time.

Tools Needed:

1/2 in.

hex bit 3/16 in.

EE and ZZ

Top View

Rear

I. Grounding The Welding Table

! Connect welding table to a

good electrical ground

(independent of the welding

leads) unless a qualified

person assures it is safe to

work on an ungrounded

workpiece.

1 Ground Bolt

2 Tapped Hole For Ground Bolt

Use the supplied ground bolt to

connect the welding table to a good

electrical ground according to

national, state, and local codes.

Tools Needed:

hex bit 3/16 in.

Effective January 1, 2018

(Equipment with a serial number preface of MJ or newer)

This limited warranty supersedes all previous Miller warranties and is exclusive with no other

guarantees or warranties expressed or implied.

LIMITED WARRANTY − Subject to the terms and conditions below,

Miller Electric Mfg. LLC, Appleton, Wisconsin, warrants to its original

retail purchaser that new Miller equipment sold after the effective date of

this limited warranty is free of defects in material and workmanship at

the time it is shipped by Miller. THIS WARRANTY IS EXPRESSLY IN

LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING THE WARRANTIES OF MERCHANTABILITY AND

FITNESS.

Within the warranty periods listed below, Miller will repair or replace any

warranted parts or components that fail due to such defects in material

or workmanship. Miller must be notified in writing within thirty (30) days

of such defect or failure, at which time Miller will provide instructions on

the warranty claim procedures to be followed. If notification is submitted

as an online warranty claim, the claim must include a detailed

description of the fault and the troubleshooting steps taken to identify

failed components and the cause of their failure.

Miller shall honor warranty claims on warranted equipment listed below

in the event of such a failure within the warranty time periods. All

warranty time periods start on the delivery date of the equipment to the

original end-user purchaser, and not to exceed twelve months after the

equipment is shipped to a North American distributor or eighteen

months after the equipment is shipped to an International distributor.

1. 5 Years Parts — 3 Years Labor

* Original Main Power Rectifiers Only to Include SCRs,

Diodes, and Discrete Rectifier Modules

2. 3 Years — Parts and Labor

* Auto-Darkening Helmet Lenses (Except Classic

Series) (No Labor)

* Engine Driven W

elder/Generators

(NOTE: Engines are Warranted Separately by the

Engine Manufacturer.)

* Inverter Power Sources

* Plasma Arc Cutting Power Sources

* Process Controllers

* Semi-Automatic and Automatic Wire Feeders

* Transformer/Rectifier Power Sources

3. 2 Years — Parts and Labor

* Auto-Darkening Helmet Lenses − Classic Series Only

(No Labor)

* Auto-Darkening Weld Masks (No Labor)

* Fume Extractors − Capture 5, Filtair 400 and Industrial

Collector Series

4. 1 Year — Parts and Labor Unless Specified

* AugmentedArc and LiveArc Welding Systems

* Automatic Motion Devices

* Bernard BTB Air-Cooled MIG Guns (No Labor)

* CoolBelt and CoolBand Blower Unit (No Labor)

* Desiccant Air Dryer System

* External Monitoring Equipment and Sensors

* Field Options

(NOTE: Field options are covered for the remaining

warranty period of the product they are installed in,

or for a minimum of one year — whichever is

greater.)

* RFCS Foot Controls (Except RFCS-RJ45)

* Fume Extractors − Filtair 130, MWX and SWX Series

* HF Units

* ICE/XT Plasma Cutting Torches (No Labor)

* Induction Heating Power Sources, Coolers

(NOTE: Digital Recorders are Warranted

Separately by the Manufacturer.)

* Load Banks

* Motor-Driven Guns (except Spoolmate Spoolguns)

* PAPR Blower Unit (No Labor)

* Positioners and Controllers

* Racks

* Running Gear/Trailers

* Spot Welders

* Subarc Wire Drive Assemblies

* TIG Torches (No Labor)

* Tregaskiss Guns (No Labor)

* Water Cooling Systems

* Wireless Remote Foot/Hand Controls and Receivers

* Work Stations/Weld Tables (No Labor)

5. 6 Months — Parts

* Batteries

6. 90 Days — Parts

* Accessory (Kits)

* Canvas Covers

* Induction Heating Coils and Blankets, Cables, and

Non-Electronic Controls

* M-Guns

* MIG Guns, Subarc (SAW) Torches, and External

Cladding Heads

* Remote Controls and RFCS-RJ45

* Replacement Parts (No labor)

* Spoolmate Spoolguns

Miller’s True Blue Limited Warranty shall not apply to:

1. Consumable components; such as contact tips,

cutting nozzles, contactors, brushes, relays, work

station table tops and welding curtains, or parts that

fail due to normal wear. (Exception: brushes and

relays are covered on all engine-driven products.)

2. Items furnished by Miller, but manufactured by others,

such as engines or trade accessories. These items are

covered by the manufacturer’s warranty, if any.

3. Equipment that has been modified by any party other than

Miller, or equipment that has been improperly installed,

improperly operated or misused based upon industry

standards, or equipment which has not had reasonable

and necessary maintenance, or equipment which has

been used for operation outside of the specifications for

the equipment.

MILLER PRODUCTS ARE INTENDED FOR COMMERCIAL AND

INDUSTRIAL USERS TRAINED AND EXPERIENCED IN THE USE

AND MAINTENANCE OF WELDING EQUIPMENT.

The exclusive remedies for warranty claims are, at Miller’s option,

either: (1) repair; or (2) replacement; or, if approved in writing by

Miller, (3) the pre-approved cost of repair or replacement at an

authorized Miller service station; or (4) payment of or credit for the

purchase price (less reasonable depreciation based upon use).

Products may not be returned without Miller’s written approval.

Return shipment shall be at customer’s risk and expense.

The above remedies are F.O.B. Appleton, WI, or Miller’s authorized

service facility. Transportation and freight are the customer’s

responsibility. TO THE EXTENT PERMITTED BY LAW, THE

REMEDIES HEREIN ARE THE SOLE AND EXCLUSIVE

REMEDIES REGARDLESS OF THE LEGAL THEORY. IN NO

EVENT SHALL MILLER BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES

(INCLUDING LOSS OF PROFIT) REGARDLESS OF THE LEGAL

THEORY. ANY WARRANTY NOT PROVIDED HEREIN AND ANY

IMPLIED WARRANTY, GUARANTY, OR REPRESENTATION,

INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR PARTICULAR

PURPOSE, ARE EXCLUDED AND DISCLAIMED BY MILLER.

Some US states do not allow limiting the duration of an implied

warranty or the exclusion of certain damages, so the above

limitations

may not apply to you. This warranty provides specific

legal rights, and other rights may be available depending on your

state. In Canada, some provinces provide additional warranties or

remedies, and to the extent the law prohibits their waiver, the

limitations set out above may not apply. This Limited Warranty

provides specific legal rights, and other rights may be available, but

may vary by province.

Warranty Questions?

Call

1-800-4-A-MILLER

for your local

Miller distributor.

miller_warr 2018-01

Your distributor also gives

you ...

Service

You always get the fast,

reliable response you

need. Most replacement

parts can be in your

hands in 24 hours.

Support

Need fast answers to the

tough welding questions?

Contact your distributor.

The expertise of the

distributor and Miller is

there to help you, every

step of the way.

ORIGINAL INSTRUCTIONS − PRINTED IN USA  2018 Miller Electric Mfg. LLC 2018−01

Miller Electric Mfg. LLC

An Illinois Tool Works Company

1635 West Spencer Street

Appleton, WI 54914 USA

International Headquarters−USA

USA Phone: 920-735-4505 Auto-Attended

USA & Canada FAX: 920-735-4134

International FAX: 920-735-4125

For International Locations Visit

www.MillerWelds.com

Model Name Serial/Style Number

Purchase Date (Date which equipment was delivered to original customer.)

Distributor

Address

City

State Zip

Please complete and retain with your personal records.

Always provide Model Name and Serial/Style Number.

Contact a DISTRIBUTOR or SERVICE AGENCY near you.

Welding Supplies and Consumables

Options and Accessories

Personal Safety Equipment

Service and Repair

Replacement Parts

Training (Schools, Videos, Books)

Technical Manuals (Servicing Information

and Parts)

Circuit Diagrams

Welding Process Handbooks

Contact the Delivering Carrier to:

For Service

Owner’s Record

File a claim for loss or damage during

shipment.

For assistance in filing or settling claims, contact

your distributor and/or equipment manufacturer’s

Transportation Department.

Contact your Distributor for:

To locate a Distributor or Service Agency visit

www.millerwelds.com or call 1-800-4-A-Miller

Miller LK000000 Owner's manual

Brand: Miller

Model: LK000000

Category: Welding System

Type: Owner's manual

This manual is also suitable for

ARCSTATION WELD TABLE - 60SX

Download PDF

report

in other languages

français: Miller LK000000 Le manuel du propriétaire

Miller LK000000 Owner's manual

This manual is also suitable for

Miller LK000000 Owner's manual

in other languages

Related papers

Other documents