LevelOne POI-3000 Datasheet

Category
PoE adapters
Type
Datasheet

LevelOne POI-3000, a Gigabit PoE+ Injector, offers advanced PoE solutions for remote PoE PD devices. With up to 30W of PoE power and IEEE 802.3at compliance, it's compatible with 10/100/1000Base-T LAN environments. Safe for low-power devices, it provides reliable power to WLAN access points and automatically detects/protects non-standard Ethernet terminals.

LevelOne POI-3000, a Gigabit PoE+ Injector, offers advanced PoE solutions for remote PoE PD devices. With up to 30W of PoE power and IEEE 802.3at compliance, it's compatible with 10/100/1000Base-T LAN environments. Safe for low-power devices, it provides reliable power to WLAN access points and automatically detects/protects non-standard Ethernet terminals.

2
Gigabit PoE Plus
Injector
POI-3000
Advanced PoE Solution
The LevelOne POI-3000 is a single port, high-
power PoE PSE solution for remote PoE PD devices.
Generating up to 30W , POI-3000 supplies remote
power for new applications such as wireless
access points, pan-tilt-zoom (PTZ) IP cameras and
videophones. It complies with IEEE 802.3at PoE
standard and is backwards to IEEE802.3af. It can work
with 10/100Base-T networking devices and emerging
1000Base-T devices such as Wi-MAX and wireless IEEE
802.11n access points. For all the function featured
in POI-3000, people can get the benet of exible
network installation at lower cost, less downtime. It
also provides a high-bandwidth pipe to the network.
Key Features
- Up to 30W of PoE Power
- IEEE 802.3at Compliant
- Compatible with IEEE 802.3af or Legacy PoE
applications
- Safe on Low Power Devices Receive Only the Power
They Need
- Safe and Reliable Power to WLAN Access Points
- Automatic Detection and Protection of Non–
standard Ethernet Terminals
- Supports 10/100/1000Base-T LAN environnent
- Unique interlocking feature for easy installation
POS-3000
Gigabit High Power PoE Splitter
Works Well With
H/W Version: 1
1. PoE LED Indicators
2. RJ-45 Output Port
3. RJ-45 Input Port
4. Interlocking Feature
1 2 3 4 65 7 7
5. Panel Mounted Male Connector
6. Interlocking Feature
7. Wall-Mountable
POS-1001
Gigabit PoE Splitter
www.level1.com
I
one world_one brand_one level_
3
PoE PD/PSE/Repeaters
Technical Specications
Standards Compliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-Tx Fast Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet
Connector
RJ-45 10/100/1000 Mbps
PoE Power Output
Pin Assignment and Polarity: 1/2(+), 3/6 (-)
Output Power Voltage: 52 Vdc Maximal
Power: 30 Watts Maximal
Input Power AC Input Voltage: 100~240 VAC
Requirements AC Input Current: 0.8A@ 100-240 VAC
AC Frequency: 50~60 Hz
Dimensions (L x W x H) / Weight
143mm x 51mm x 38mm (5.62in x 20in x 1.49in)
350g (0.77lbs)
Indicators:
AC Power (Orange) / PoE (Green)
Environmental Conditions
Operating Temperature: 0~45°C
Storage Humidity: Maximum 95%, Non-condensing
Regulatory
RoHS Compliant, CE/FCC
Safety Approvals
EN 60950:2006
Product Diagram
Order Information
POI-3000:
Gigabit PoE Plus Injector
Package Contents
POI-3000 x 1
Power Cord x 1
Quick Installation Guide x 1
All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
V1.0
Ethernet Cable (RJ-45)
PoE
Gigabit Non-PoE Switch
Video Phone
(PoE PD)
P/T/Z Camera
(PoE PD)
802.11 Access Point
(PoE PD)
POI-3000
Unique interlocking feature
30W
  • Page 1 1
  • Page 2 2

LevelOne POI-3000 Datasheet

Category
PoE adapters
Type
Datasheet

LevelOne POI-3000, a Gigabit PoE+ Injector, offers advanced PoE solutions for remote PoE PD devices. With up to 30W of PoE power and IEEE 802.3at compliance, it's compatible with 10/100/1000Base-T LAN environments. Safe for low-power devices, it provides reliable power to WLAN access points and automatically detects/protects non-standard Ethernet terminals.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI