Brodit 8546023 Datasheet

Category
Holders
Type
Datasheet
7 December, 2011, www.brodit.com, © 2011 Brodit AB
Product 854623
854623 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288546230
Item no 854623 fits:
Mazda 5 12 (For USA)
Mazda 5 11-12 (For Europe)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclsoed alcohol pad to clean the area where the ProClip is to be installed. Press the thin angled edge
of the enclosed gap opener downward into the gap between the frame surrounding the information window and
the surrounding panel, to widen the gap. Peel off the adhesive tape cover on the ProClip. Press the curved edge
on the upper part of the ProClip into the gap next to the gap opener.
2. Flip the ProClip downward so the curved upper edge hooks behind the frame surrounding the information
window. Pull out the gap opener.
3. Pull the ProClip toward you and hook the angled lower edge under the upper edge of the air vent.
4. The ProClip is in place.
2(2)
  • Page 1 1
  • Page 2 2

Brodit 8546023 Datasheet

Category
Holders
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI