Cables Direct 1m CAT6a, M - M Datasheet

1m CAT6a, M - M
Brand
Cables Direct
Model
1m CAT6a, M - M
Category
Networking cables
Type
Datasheet

This manual is also suitable for

Cables Direct 1m CAT6a, M - M is a high-performance Ethernet cable designed for demanding network applications. It supports speeds up to 10 Gigabit Ethernet (10GbE), which is 10 times faster than Gigabit Ethernet. With its 600MHz bandwidth and S/FTP (Screened and Foil Twisted Pair) shielding, this cable provides excellent signal quality and protection against electromagnetic interference (EMI). The snagless connectors and flush molded strain relief ensure easy installation and durability.

Cables Direct 1m CAT6a, M - M is a high-performance Ethernet cable designed for demanding network applications. It supports speeds up to 10 Gigabit Ethernet (10GbE), which is 10 times faster than Gigabit Ethernet. With its 600MHz bandwidth and S/FTP (Screened and Foil Twisted Pair) shielding, this cable provides excellent signal quality and protection against electromagnetic interference (EMI). The snagless connectors and flush molded strain relief ensure easy installation and durability.

CAT6A Patch Cable
Details correct on: 07/09/2012
Notification
Product Code ART-101R
Short Description Red, 10GBase-T, 26AWG, 600MHz, S/FTP, 1Mtr
Full Description
Category 6A Ethernet cable, commonly referred to as Cat6A, is a cable
standard for 10 Gigabit Ethernet. The cable standard provides
performance of up to 600MHz and is suitable for 10BASE-T, 100BASE-
TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and
10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with
previous standards such as Cat6, Cat5e and Cat5.
LSZH: low Smoke Zero Halogen cable reduces the amount of toxic and
corrosive gas emitted during a fire.
Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than
Gigabit Ethernet, 10GE (also called 10GbE or 10 GigE) supports a data
rate of 10Gbits/s (billion bits per second).
S/FTP (or S/STP): Screened and Foil (Shielded) Twisted Pair. Each
individual pair is screened by foil and features an overall outer sheath.
This shielding protects the cable from EMI (Electro-Magnetic
Interference).
Snagless Connectors: The connectors feature a
“
bubble
”
which
protects the locking clip on the RJ45 from damage or being snapped off
during transport or installation.
Flush Moulded Strain Relief: The flush moulded design allows the
patch cables to be installed side by side in high-density network switches.
The strain relief allows the cables to move without damaging the cable or
breaking away from the connector while it is plugged in a device
This product has been tested and found to comply with the applicable
electrical transmission characteristics specified in: ISO/IEC 11801 ED.2
and ANSI/TIA-568-C.2
IEC 60332-1-2, RoHS Compliant and 3P Verified
Available in 0.5, 1, 2, 3, 5 and 10 metre lengths
All lengths are available in grey, yellow, red, blue green and black.
Extra Information
Specification:
Red CAT6A cable
Injection moulded snagless connectors
Screened / Foil twisted pair
Low Smoke Zero Halogen
4x 26 AWG Copper
600MHz
RJ45 Shielded connector with 50
µ
Inch Gold Plate
1Mtr
www.CablesDirect.co.uk
  • Page 1 1

Cables Direct 1m CAT6a, M - M Datasheet

1m CAT6a, M - M
Brand
Cables Direct
Model
1m CAT6a, M - M
Category
Networking cables
Type
Datasheet
This manual is also suitable for

Cables Direct 1m CAT6a, M - M is a high-performance Ethernet cable designed for demanding network applications. It supports speeds up to 10 Gigabit Ethernet (10GbE), which is 10 times faster than Gigabit Ethernet. With its 600MHz bandwidth and S/FTP (Screened and Foil Twisted Pair) shielding, this cable provides excellent signal quality and protection against electromagnetic interference (EMI). The snagless connectors and flush molded strain relief ensure easy installation and durability.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents