Power supply selection
1. The priority power supply: 110V/220V~50/60Hz; lead-acid battery; 4 “AA” cell batteries
2. Connect power plug & cord can charge the lead-acid battery automatically and the
“ CHARGE” display light remain on unless the battery pack is full charged.
Appearance And Function
1. Telescopic antenna
2. Handle
3. Power/Function switch
4. Band switch
5. Band window
6. LCD display
7. Tuning button
8. SD Card light:The display light on while
connecting to the SD/MMC card.
9. Info display
10. Repeat : Press to choose the
repeat function as follows:
REPEAT 1: Single tune repeat
playback
REPEAT FOLDER: Single folder tunes
repeat playback
REPEAT ALL: All MP3 tunes repeat
playback
RANDOM: Random playback
11. Forward button:Short press to skip to
The next tune and extended press to
fast forward
12. Rewind button:Short press to skip
to the previous tune and extended
press to fast rewind
13. Play/Pause button
14. USB/SD switch
15. Power light: Display light on after power
on the unit.
16. Volume Button
17. Charge light:The display light on during
the charge process, the light turn off until
the battery full charged.
18. Remote Control infrared receiver
19. Earphone Jack
20. USB Jack
21.SD Card Jack