2. Backyard X-Scapes
  3. HDD-BAJA10

Backyard X-Scapes HDD-BAJA10 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Backyard X-Scapes HDD-BAJA10 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Easy Installation!
Ideal for installation on
all solid roof designs.
Realistic, articial palm
thatch panels conform
and adjust to any custom
roof design.
Install our Baja Palm™
Top Cone (sold
separately) on any
custom roof peak.
Baja Palm™ 3-Layer Thatch Sub-Panel
Specicatons
l
Length: 31”
l
Height: 24”
Standard Roof
l
Coverage: 1.72 Sq. Ft.
l
Center Installation: 8”
Round or Circular Roof
l
Coverage: 1.5 Sq. Ft.
l
Center Installation: 7”
Backyard X-Scapes, Inc.
10835 Sorrento Valley Rd.
San Diego, CA 92121
Phone: (858) 643-9030
www.articialthatch.com
[email protected]
Waterproof Installation
l
On a solid roof, panels are not visible
from underneath.
l
Best to use 30 degree roof pitch.
l
Use waterproof underlayment under
panels.
l
Attach with galvanized or stainless
screws, roong nails or pneumatic
staples.
l
First row of panels should overhang
the bottom or eave about 12-16”.
l
On any roof design with a visible
edge on the side (eave), install the
second row 2” above the rst. This
creates a fuller, more aesthetic look
on all linear eave surfaces.
l
Cut with razor knife or saw (hacksaw,
jigsaw, sawzall) with an 18 TPI blade.
Hip Installation
l
Thatch panels will bend around a hip.
l
Cut with razor knife or saw (hacksaw,
jigsaw, sawzall) with an 18 TPI blade.
l
Use panels cut in half to cover the
hip line, and install every 6”. Contact
the manufacturer if assistance is
required.
l
Install our Baja Palm™ Top Cone (sold
separately) on any custom roof peak.
Valley Installation
l
Cut thatch panels at proper angle to
t tightly into the valley.
l
Cut with razor knife or saw (hacksaw,
jigsaw, sawzall) with an 18 TPI blade.
Baja Palm™ 3-Layer Thatch Sub-Panel Installation Tips
www.articialthatch.com (858) 643-9030 sales@artthatch.com
8” (or 7”)
Short 2” course
when necessary
8” (or 7”)
Hip Panels Every 6”
Up The Hip Line
/