Santec VCHD-1622 User manual

Page is loading ...

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 3 -

Dear customer,

Thank you for purchasing a high quality SANTEC device.

We recommend that you read this manual thoroughly before operating your new system for

the first time. Please follow all instructions and observe the warnings contained in this

manual.

Please contact your local dealer or us if you have any questions or if you wish to claim for a

service or warranty.

You will find further information on our website:

www.santec-video.com

in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), without

the written prior permission of SANTEC BW AG.

No reproduction of any part or excerpts thereof are permitted.

Errors excepted. Specifications are subject to change without notice for quality improvement.

SANTEC is a registered trademark of SANTEC BW AG. All other companies or products mentioned in

this publication are trademarks, registered trademarks or brands of the respective company.

Page is loading ...

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 5 -

ENGLISH

Table of contents

Safety precautions 40

Safety instructions 41

About this user manual 42

1. Special features 43

2. Installation 43

2.1 General 43

2.2 Power supply and monitor impedance 43

3. VCHD-1622 44

3.1 Items included in the delivery 44

3.2 Camera overview 44

3.3 Access to mini-joystick and OSD setting 45

3.4 Lens setting 45

3.5 Technical specifications 46

3.6 Technical drawing 47

4. VCHD-2612IR 48

4.1 Items included in the delivery 48

4.2 Camera overview 48

4.3 Access to mini-joystick and OSD setting 51

4.4 Lens setting 51

4.5 Technical specifications 52

4.6 Technical drawing 53

5. VCHD-2792IR 54

5.1 Items included in the delivery 54

5.2 Camera overview 54

5.3 Access to mini-joystick and OSD setting 56

5.4 Lens setting 56

5.5 Technical specifications 57

5.6 Technical drawing 58

6. VCHD-3692IR 59

6.1 Items included in the delivery 59

6.2 Camera overview 59

6.3 Access to mini-joystick and OSD setting 61

6.4 Lens setting 61

6.5 Technical specifications 63

6.6 Technical drawing 64

7. VCHD-4322IR 65

7.1 Items included in the delivery 65

7.2 Camera overview 65

7.3 Access to mini-joystick and OSD setting 67

7.4 Lens setting 67

7.5 Technical specifications 68

7.6 Technical drawing 69

8. Camera setting via OSD menu 70

Page is loading ...

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 40 -

Safety precautions

Caution

Description of symbols

Danger: This symbol is intended to alert the user to the presence of un-insulated

"dangerous voltage" within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to a person.

Warning: This symbol is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying

the appliance.

CE compliance

This appliance complies with the CE guidelines.

Attention: Any changes or modifications to this appliance which have not been explicitly

approved of by the respective regulatory authority, may lead to a prohibition of usage of this

appliance.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 41 -

Safety instructions

Before operating the appliance, please read this manual carefully and retain it for further

reference.

Before cleaning the appliance, it has to be switched off and unplugged from the power outlet.

Wipe the appliance with a soft damp cloth.

Do not use harsh cleansers or aerosols for cleaning. The type label may not be replaced.

Do not use attachments unless recommended by the manufacturer as they may affect the

functionality of the appliance and result in the risk of fire, electric shock or injury.

Never install the appliance in areas exposed to water or other liquids.

The appliance has to be installed in a safe and stable location according to the instructions of the

manufacturer. Care should be used when moving heavy equipment. Quick stops, excessive force,

and uneven surfaces may cause the appliance to fall causing serious injury to persons and

damage to objects.

Openings in the appliance, if any, are provided for ventilation to ensure reliable operation of the

appliance and to protect if from overheating. These openings must not be covered or blocked.

Please make sure that the appliance does not overheat.

The appliance should only be operated from the type of power source indicated on the marking

label. If you are not sure of the type of power supplied at the installation location, please contact

your local dealer.

An appliance which is powered through a polarized plug (a plug with one blade wider than the

other) will fit into the power outlet only one way. This is a safety feature. If you are unable to insert

the plug into the outlet, try reversing the plug. Do not defeat the safety purpose of the polarized

plug.

If the appliance is powered through a grounding-type plug, the plug will only fit into a grounding-

type power outlet. This is a safety feature. If your outlet does not have the grounding plug

receptacle, contact your local electrician.

Route power cords and cables in a manner to protect them from damage by being walked on or

pinched by items places upon or against them.

For protection of the appliance during a lightning storm or when it is left unattended and unused

for a longer period, unplug the appliance from the wall outlet. Disconnect any antennas or cable

systems that may be connected to the appliance. This will prevent damage to the appliance due to

lightning or power-line surges.

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric

shock.

Never insert items into the openings of the appliance. They may touch parts under electric current

which may cause an electric shock.

Never pour any liquids over the appliance.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 42 -

In case of any operating interruption or a complete operating failure please switch off the

appliance and disconnect it from the wall outlet. Never attempt to service or repair the appliance

yourself, as opening or removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

When replacement parts are required, be sure that the service technician uses replacements parts

specified by the manufacturer or that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

Upon completion of any service or repairs to the appliance, ask the service technician to perform

safety checks to verify that the appliance is in proper operating condition.

The appliance should only be installed by qualified service personnel and has to comply with local

specifications and regulations.

For cameras with IR-LEDs: Please make sure to always keep a distance of > 1m to

avoid damages to your health. Never look directly into the IR-LEDs – this may cause

eye damages!

Never point the camera at an object with a high degree of luminance. Bright vertical or horizontal

lines can result in a distortion (outshine) of the entire image on the monitor.

If the camera is operated in locations with extremely differing light conditions, the aperture has to

be adapted.

Please respect the local legal regulations on waste if you need to dispose of discarded appliances.

This symbol means that electrical appliances need to be disposed of properly and not

simply with unsorted household refuse. Please respect local regulations on waste

disposal.

About this user manual

This manual aims at assisting the user on how to operate VCHD-1622, VCHD-2612IR, VCHD-2792IR,

VCHD-3692IR and VCHD-4322IR.

This manual is subject to rigid quality control. However, no guarantee can be given that mistakes are

not present. We reserve the right to make changes to the manual without prior notice.

Before operating the appliance, please read this manual carefully and retain it for further reference.

Verify that all appliance items are included in the delivery. Should items be missing, do not operate the

appliance and contact your local dealer.

Never attempt to repair the appliance yourself. This should only be done by qualified service

personnel.

Improper handling of the appliance will invalidate the warranty.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 43 -

1. Special features

Day/night camera with electronic switching

High resolution 1080p / 720p

Integrated manual zoom lens (not for VCHD-1622)

Wide Dynamic Range (WDR) function

Defog function

Privacy zones

Motion detection

Convenient camera adjustment by OSD menu using a mini-joystick

Integrated IR-LEDs (not for VCHD-1622)

2. Installation

2.1 General

This camera has been designed for video surveillance applications. The appliance must only

be installed by qualified service personnel and has to comply with local specifications and

regulations.

Make sure to fix the camera onto a solid basis which is capable of carrying the weight of the

camera. Ensure that the camera is safely installed by using only suitable screws.

2.2 Power supply and monitor impedance

Only use a stablized 12 V DC or 24 V AC power supply unit with sufficient wattage (see

chapter “Technical specifications” for recommended power supply units).

Only approved cables should be used.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 44 -

3. VCHD-1622

3.1 Items included in the delivery

1x Camera VCHD-1622

1x Adapter: BNC socket

1x Power cable

1x User manual

3.2 Camera overview

Side view with connected lens:

Note:

The camera comes without a lens (the lens

in the picture is just an example).

Go to www.santec-video.com to look for

recommended lenses for this camera.

Side view without lens:

Rear view:

Additional PAL output

(adapter included in delivery

HD-SDI output

Power connector

(12 V DC / 24 V AC)

Mini-joystick

Power LED

Day/night switch

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 45 -

3.3 Access to mini-joystick and OSD setting

The camera housing must not be opened. All settings can be made from outside the housing.

On the camera rear, you will fin a mini-joystick. Press onto the joystick and a menu pops up

in the video picture. You can now move the joystick left/right/up/down in order to get to the

desired menu item. For confirming your choice, press onto the joystick.

See chapter 8 for „Camera settings via OSD menu”.

3.4 Lens setting

The camera comes without a lens. A list of recommended lenses is available in the

“Technical specifications” chapter and on the SANTEC website at www.santec-video.com.

To achieve a good image quality, the used lens has to support at least 2 megapixel.

If you need assistance selecting a suitable lens, our sales team will be available to support

you.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 46 -

3.5 Technical specifications

Camera model

VCHD-1622

Camera type

HD-SDI Full HD day/night box camera

Sensor

1/3” Progressive CMOS

Resolution

1080p / 720p

S/N ratio

> 50 dB

Lens

C/CS

Iris control

DC/manual

Lens type

C/CS

Focal length

-/-

Angle of view (horizontal)

-/-

IR cut filter

Mechanical

Sensitivity

0.1 / 0.002 Lux

Automatic Gain Control

(AGC)

Yes

Digital Noise Reduction

(DNR)

Yes

White balance

AWB / manual

Backlight compensation

BLC, WDR, HLC

Day/night mode adjustment

Auto, colour, black/white, external

Digital zoom

1x – 8x

Motion detection

Yes, 4 zones

Privacy zones

Yes, 16 zones

Video output

BNC for HD-SDI signal

Classification

IP-44

Vandal-proof

No

Housing colour

White

Housing material

Aluminium

Integrated IR-LEDs

No

IR wavelength

-/-

IR range

-/-

Voltage

12 V DC / 24 V AC

Power consumption

approx. 3 watt

Operating temperature

-10° to +50° C

Dimensions (mm)

65 x 55 x 125

Weight

335 g (without lens)

Recommended accessories

SL940A Theia lens

VCA-12V-1.5ASA power supply

VCA-24V-8A16P multiple power supply

VCA-24V-1A/B power supply

VA-13WIK bracket

Subject to technical changes without notice. Errors excepted.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 47 -

3.6 Technical drawing

Side view:

Front view:

All dimensions in mm.

Drawings not true to scale.

Subject to technical changes without notice. Errors excepted.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 48 -

4. VCHD-2612IR

4.1. Items included in the delivery

1x Camera VCHD-2612IR

1x Adapter: BNC socket

1x Power cable

1x Housing opener

1x User manual

4.2 Camera overview

Picture 1: How to open the housing (use housing opener):

Picture 2: Camera mounting:: Picture 3: Lens setting:

Screw for camera

module

Please use the supplied housing

opener to remove the housing

bubble from the camera module.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 49 -

Picture 4: Lens adjustment Picture 5: Putting the housing

(zoom and focus): onto the camera module:

Picture 6: Power and video connection:

Minus-Pol

HD-SDI output

Power 12 V DC / 24 V AC

Plus-Pol

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 50 -

Picture 7: Mini-joystick:

IR-LED setting:

The camera is equipped with IR LEDs. Hence a surveillance even under poor light conditions

and in darkness is possible.

When installing the camera and adjusting the lens, please ensure not to cover the IR LEDs.

Never point the IR LEDs directly to a bright spot (e.g. a white wall) because this might lead to

reflections.

Depending on the light conditions, the integrated IR LEDs automatically switch on and off.

The range of the IR LEDs strongly depends on the site and the environment.

Attention:

The camera is equipped with IR-LEDs. Please make sure to always keep a

distance of > 1m to avoid damages to your health. Never look directly into the

IR-LEDs – this may cause eye damages!

Mini-joystick for

camera settings

Test video output

(PAL/D1)

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 51 -

4.3 Access to mini-joystick and OSD setting

Open the camera housing by using the supplied opener. Put it into the housing’s slit and

carefully pull the housing bubble off.

All camera adjustments are done via an OSD menu. On the camera, you will fin a mini-

joystick. Press onto the joystick and a menu pops up in the video picture. You can now move

the joystick left/right/up/down in order to get to the desired menu item. For confirming your

choice, press onto the joystick.

See chapter 8 for „Camera settings via OSD menu”.

Close the camera housing by putting the bubble onto the camera module and pressing it.

Screws are not required. Clean the bubble after the installation.

4.4 Lens settings

The camera module can be set via 3 axis which makes it possible to have customised

settings, e.g. in case of wall mounting.

1. turn the whole bracket

2. up and down

3. turn the camera module (loosen the screw and tight it again after adjustment has

been completed)

For making adjustments, loosen the screws carefully.

After the adjustments have been made, tighten the screws again carefully.

To achieve the correct angle of view, turn the zoom ring until you get from a wide angle to a

near angle or vice versa. Use the second ring to adjust the sharpness.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 52 -

4.5 Technical specifications

Camera model

VCHD-2612IR

Camera type

HD-SDI full HD day/night colour dome camera

Sensor

1/3” Progressive CMOS

Resolution

1080p / 720p

S/N ratio

> 50 dB

Lens

Internal

Iris control

DC

Lens type

Manual zoom lens

Focal length

2.8 - 12 mm, F1.4

Angle of view (horizontal)

84° - 23°

IR cut filter

Mechanical

Sensitivity

0.1 /0.002 lux

0.0 lux (IR LEDs on)

Automatic Gain Control

(AGC)

Yes

Digital Noise Reduction

(DNR)

Yes

White balance

AWB / manual

Backlight compensation

BLC, WDR, HLC

Day/night mode adjustment

Auto, colour, black/white

Digital zoom

1x – 8x

Motion detection

Yes, 4 zones

Privacy zones

Yes, 16 zones

Video output

BNC for HD-SDI signal

Classification

IP-44

Vandal-proof

No

Housing colour

White

Housing material

Plastic

Integrated IR-LEDs

Yes

IR wavelength

850 nm

IR range

Up to 15 m range *

Voltage

12 V DC / 24 V AC

Power consumption

approx. 5 watt (IR-LEDs on)

Operating temperature

-10° to +50° C

Dimensions (mm)

112 x 87 mm

Weight

205 g

Recommended accessories

VCA-12V-1.5ASA

* Note: The range of the built-in IR-LEDs strongly depend on the location and the

surroundings.

Strongly absorbent surfaces, e.g. dark, rough structures (floor, lawn or asphalt) may

lead to a considerable reduction of the maximum range.

Subject to technical changes without notice. Errors excepted.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 53 -

4.6 Technical drawing

Side view:

Bottom view:

All dimensions in mm. Drawings not true to scale.

Subject to technical changes without notice. Errors excepted.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 54 -

5. VCHD-2792IR

5.1 Items included in the delivery

1x Camera VCHD-2792IR

1x Adapter: BNC socket

1x Power cable

1x Sun shield

1x Allen wrench

1x Opener for service lid

1x User manual

5.2 Camera overview

Picture 1:

Picture 2:

Wall bracket with integrated cable

management

Sun shield

Lens adjustment:

F = Focus

Z = Focal length

Service lid

Security tape

for lid

Additional video connection (via adapter), e.g.

for monitor connection during installation

phase (PAL/D1)

Mini-joystick for

OSD setting

IR-LED adjustment:

It is possible to switch off the IR-LED completely so that the camera

can also be operated without IR illumination.

Opener for

service lid

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 55 -

Picture 3: Connections

IR-LED setting:

The camera is equipped with IR LEDs. Hence a surveillance even under poor light conditions

and in darkness is possible.

When installing the camera and adjusting the lens, please ensure not to cover the IR LEDs.

Never point the IR LEDs directly to a bright spot (e.g. a white wall) because this might lead to

reflections.

Depending on the light conditions, the integrated IR LEDs automatically switch on and off.

The range of the IR LEDs strongly depends on the site and the environment.

Attention:

The camera is equipped with IR-LEDs. Please make sure to always keep a

distance of > 1m to avoid damages to your health. Never look directly into the

IR-LEDs – this may cause eye damages!

HD-CCTV video output

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 56 -

5.3 Access to mini-joystick and OSD setting

The camera housing must not be opened. All adjustments can be made from the outside.

All camera adjustments are done via an OSD menu. At the bottom of the camera there is a

small lid. Open the lid carefully by turning it left using the supplied opener. Below the lid you

will find a mini-joystick. Press onto the joystick and a menu pops up in the video picture. You

can now move the joystick left/right/up/down in order to get to the desired menu item. For

confirming your choice, press onto the joystick.

See chapter 8 for „Camera settings via OSD menu”.

Once all settings are made, close the lid again. Please make sure that the rubber gasket is

not damaged.

Finally, clean the front glass to remove fingerprints and other stains.

5.4 Lens setting

Lens adjustment (focal length and focus) is done by the two setting screws F and Z

(see picture 2):

F = Focus; Z = Focal length

Carefully turn the screws clockwise or counter-clockwise to adjust the lens according to your

needs.

Bedienungsanleitung / User manual

VCHD-1622, VCHD-2612IR, VCHD-2792IR, VCHD-3692IR, VCHD-4322IR

_________________________________________________________________________________

- 57 -

5.5 Technical specifications

Camera model

VCHD-2792IR

Camera type

HD-SDI full HD day/night IR outdoor camera

Sensor

1/3” Progressive CMOS

Resolution

1080p / 720p

S/N ratio

> 50 dB

Lens

Internal

Iris control

DC

Lens type

Manual zoom lens

Focal length

2.8 - 12 mm, F1.2

Angle of view (horizontal)

84° - 23°

IR cut filter

Mechanical

Sensitivity

0.1 /0.002 lux

0.0 lux (IR LEDs on)

Automatic Gain Control

(AGC)

Yes

Digital Noise Reduction

(DNR)

Yes

White balance

AWB / manual

Backlight compensation

BLC, WDR, HLC

Day/night mode adjustment

Auto, colour, black/white, external

Digital zoom

1x – 8x

Motion detection

Yes, 4 zones

Privacy zones

Yes, 16 zones

Video output

BNC for HD-SDI signal

Classification

IP-66

Vandal-proof

No

Housing colour

White

Housing material

Aluminium

Integrated IR-LEDs

Yes

IR wavelength

850 nm

IR range

Up to 35 m range *

Voltage

12 V DC / 24 V AC

Power consumption

approx. 9 watt (IR-LEDs on)

Operating temperature

-30° to +50° C

Dimensions (mm)

82 x 78 x 260 mm

Weight

1,200 g

Recommended accessories

VCA-12V-1.5ASA

VCA-24V-8A16P

JB-500

* Note: The range of the built-in IR-LEDs strongly depend on the location and the

surroundings.

Strongly absorbent surfaces, e.g. dark, rough structures (floor, lawn or asphalt) may

lead to a considerable reduction of the maximum range.

Subject to technical changes without notice. Errors excepted.

Page is loading ...

Santec VCHD-1622 User manual

This manual is also suitable for

Santec VCHD-1622 User manual

in other languages

Related papers

Other documents