BX FILLING MIXER
BX FILLING MIXER
Description:
Model BX Filling Mixer is suitable for stuffing blending. Two pairs of blenders
rotate and reverse in the bowl and the stuffing is blended well. All machine parts in
contact with food are made of stainless steel or are plated, and are in conformity with
Chinese hygiene standard.
Technical specifications
Model Voltage Frequency Power Rating input
Power
Production
capacity IPNO Dimensions
(mm)
Net weight
(kg)
BX35A
～
220V
50Hz 0.75kW 1.1kW 35L IPX1 670x510x1100 136
BX50A
～
220V
50Hz 1.1kW 1.5kW 50L IPX1 820x510x1100 152
BX70A
～
220V
50Hz 1.5kW 1.98kW 70L IPX1 860 x510 x1100 178
BX100A
～
220V
50Hz 1.5kW 1.98kW 100L IPX1 1010x556x1100 223
BX150A
3~380v
50Hz 1.5kW 1.9kW 150L IPX1 1100x660x1260 265
Structural Drawing
Operation and maintenance
1）Before use, check that power supply corresponds to that required by the machine,and
the machine must be earthed.
2）Run the machine without load before use. There should be proper space between the
bowl and the blenders.
3）The blenders rotate or reverse in the bowl controlled by the switch and the stuffing is
blended well.
4）Pour the stuffing into the bowl and place the cover then run the machine. Turn off the
power after finish. Remove the pin for setting the bowl and rotate the bowl. Then the
stuffing can be taken out.
5）There are four wheels and four feet under the machine
6）Din use the machine for dough mixing or it may be damaged.
Attention: It can not be cleaned by water directly.
/
