Backfire Halo User guide

Type
User guide
HALO Remote User Guide
NEW
Throttle Wheel: Acceleration/
Braking/Preview/Navigation
Power Button: ON/OFF/Menu/Select
Turbo Button: Turbo Mode/Tank Turn
Mode/Main Menu
Fingerprint Sensor
Forward/Reverse Toggle
01
S/E Button: Spo Mode/Eco Mode/
Previous Menu
Backre boards can stay in standby mode
for up to a day, within which the remote
can be used to power the board on or o.
Double clicking the Power Button turns
on the board's ambient lights. The color
of the lighting changes with the riding mode.
A single button to power on/o your
board and remote.
Aluminum Housing Batte Capacity:
1000mAh
Display Size: 1.3 inch
Voltage: 5V
Weight:130g 3hr Charge Time Fingerprint Sensor
Remote Layout
BACKFIRE
01
Technical Info
BACKFIRE
02
LCD Panel
LCD
Type-C Charging Po
S/E
Enable
Enable
Enable Unlocked
TRIP:
14
KM
ODO:
1142
KM
R
B
20
Bluetooth Enabled
Connect to the Backre APP for Firmware Updates
Cruise Control Enabled
Fingerprint Unlock Enabled
Remote automatically locks itself after 6 seconds of
inactivity to prevent accidental inputs
Current Trip Meter
Displays the distance traveled since the board was powered on
Odometer
Displays the total distance traveled since the remote was rst
paired with the board. Mileage is retained and unique to each board.
Remote Batte Indicator
Board Batte Indicator
Current Speed
TRIP:
14
KM
ODO: 1142 KM
R B
20
KPH
ECO
020
10
Dashboard Layout
BACKFIRE
03
Halo Remote
User Guide
02
03
Hold the Power Button for 3 seconds to power ON/OFF the board.
*整机出厂时,默认遥控已和滑板配对设置完成
When both the remote and board are in the OFF state, hold the Power Button on both the
board and remote at the same time for 3 seconds to pair.
In the 4WD conguration, the rear controller (ESC1) should be paired before the front (ESC2).
Auto-Pairing
Searching
Select between KM and MILES using the Throttle
Wheel, and press the Power Button on the remote
to conrm your choice.
KMMILES
Unit Selection
Select 2WD/4WD Hold the Power Button on
ESC1 for 3 seconds
Select the drivetrain setup on your
board using the throttle wheel.
Searching
ESC1
Searching
ESC2
4WD
Unit Selection
2WD
BELT
Unit Selection
HUB
Wheel Size
97
99
98
96
95
GEAR RATIO
2.5
2.7
2.6
2.4
2.3
Motor PP
6
8
75
4
Complete
2WD ONLY REQUIRES THE PAIRING OF ONE ESC
Pairing Instructions
BACKFIRE
04
Select the number of Pole Pairs for your board's
motor conguration. [Between 2-26] Pairing and conguration complete.
Select the wheel size of your board using
the throttle wheel.
[Between 90MM-200MM]
Select the gear ratio of your
drivetrain using the throttle wheel.
Hold the Power Button on
ESC2 for 3 seconds
ESC2 ESC1
产品使用指南
While the board is stationa, press the Power Button
once to open the settings menu
04
T
R
I
P
:
14
K
M
O
D
O
:
142
K
M
R B
0
KPH
ECO
0
20
10
Remote Power
Board Power
Motor
TRIP: 14 KM ODO: 14 KM
R B
20
KPH
ECO
0
20
10
R B
38
KPH
SPORT
0
38
20
Default Mode after Pairing. Press the S/E Button once to activate
Spo mode. The remote display will
turn blue/red and vibrate once.
Press the Turbo Button once
to engage Turbo Mode.
R B
50
KPH
TURBO
0
50
25
Remote Power
Remaining
Available Time
Batte Capacity 1000mAh
98%
249Min
Select Remote Power to display the Batte Status,
Time Since Power On, and Batte Capacity.
Press the S/E Button to return to the Previous Menu.
Acceleration
Motor & ESC
Remote Power
Board power
VOLTAGE:44.3V
Remaininng:51%
Bette Temp:26℃
1
5
2
6
3
7
4
8
9 10 11 12
Select Board Power to display the Batte Voltage,
Remaining Capacity, Temperature, and Batte Health.
[Blue: Healthy, Red: Unbalanced]
In the event one or more of the cells are unbalanced, contact
the Backre Suppo Team or use the
Backre Balance Charger to restore the pack to a healthy state
VOLTAGE:44.3V
Remaininng:51%
Bette Temp:26℃
1
5
2
6
3
7
4
8
9 10 11 12
Ride Modes
BACKFIRE
05
Battery Status
BACKFIRE
06
ECO Mode Spo Mode Turbo Mode
TRIP: 14 KM ODO: 14 KM TRIP: 14 KM ODO: 14 KM
Cruise Control Mode
While riding, press the Power Button then release the Throttle Wheel to engage Cruise Control Mode.
05
Select Motor & ESC to display their temperatures. Select ECO Setting to adjust the Speed, Acceleration
and Brake prole for ECO Mode.
Select Fingerprint Settings to add and remove ngerprints.
A total of 3 ngerprints can be stored on the remote.
To add a ngerprint, place your nger
on the sensor until the remote vibrates,
then lift it o and repeat until the status
displays 100%
Select Spo Setting to adjust the Speed, Acceleration
and Brake prole for Spo Mode. Select Turbo Setting to adjust the Speed, Acceleration
and Brake prole for Turbo Mode.
Remote Power
Board Power
Acceleration
Braking
Motor & ESC
80℃
76℃
ESC
TEMPERATURE :
MOTOR
TEMPERATURE :
Board Power
Motor & ESC
ECO Setting
Turbo Setting
ECO SETTING
Speed
Acceleration
Brake
40%
20%
70%
SPORT SETTING
Speed
Acceleration
Brake
76%
40%
80%
Motor & ESC
ECO Setting
Turbo Setting
Restore Setting
ECO Setting
Turbo Setting
Restore Setting
TURBO SETTING
Speed
Acceleration
Brake
100%
100%
100%
Turbo Setting
Fingerprint Settings
Restore Setting
Firmware Upgrade
FINGERPRINT
SETTINGS
Fingerprint 1
Fingerprint 2
Fingerprint 3
Safety Switch
Delete Fingerprint
FINGERPRINT
0%
Multiple ngerprint calibration cycles are required for maximum reliability and accuracy.
FINGERPRINT
100%
Complete
Advanced Settings
BACKFIRE
07
Fingerprint Setup
BACKFIRE
08
Fingerprint Setting
产品使用指南
06
The Safety Switch option enables/disables
ngerprint unlock.
To remove all stored ngerprints, select the
Delete Fingerprints option.
Select Restore Setting to Restore the Remote
to its Facto Calibrated Settings. Select Firmware Update to Update
the Remote Firmware
FINGERPRINT
SETTINGS
Fingerprint 1
Fingerprint 2
Fingerprint 3
Safety Switch
Delete Fingerprints
ON OFF
FINGERPRINT
SETTINGS
Fingerprint 1
Fingerprint 2
Fingerprint 3
Safety Switch
Delete Fingerprints
ON OFF
Fingerprint Setting
Restore Setting
Turbo Setting
Firmware Setting
Restore Remote ?
NO YES
Fingerprint Setting
Restore Setting
Firmware Update
FIRMWARE
UPDATE
100%
Update Finished
95%
90%
Board: Charging
Remote: Charging
Board: Not Charging
Remote: Charging
Board: Charging
Remote: Not Charging
Board: Not Connected
Remote: Charging
Board: Fully Charged
Remote: Fully Charged
95%
70%
95%
100% 90%
UNCONNECTED
100%
100%
Single ngerprint delete is currently not suppoed.
Restore Factory Settings and Updating Firmware
BACKFIRE
09
Charging Status
BACKFIRE
10
07
T
R
I
P
:
1
4
K
M
O
D
O
:
1
4
2
K
M
R B
0
KPH
ECO
020
10
T
R
I
P
:
1
4
K
M
O
D
O
:
1
4
2
K
M
R B
0
KPH
ECO
020
10
Press the Turbo Button twice to engage Tank Turn Mode.
Press the Power Button once to disengage.
T
R
I
P
:
1
4
K
M
O
D
O
:
1
4
2
K
M
R B
KPH
ECO
020
10
TANK
Brake
Accelerate
For beginners and children, we recommend donning protective gear and staing out
with ECO Mode. Roll the Throttle Wheel forwards in small increments to accelerate gently.
Position your feet slightly wider than shoulder-width on the deck and bend your knees slightly
to lower your center of gravity.
Lean back when braking to
prevent being thrown forward by
the sudden deceleration.
Lean forward when accelerating to
prevent falling backwards
when the torque kicks in.
Tank Turn Mode
BACKFIRE
11
Rider Controls
BACKFIRE
12
Warning: Keep clear of the board when Tank Turn Mode is engaged.
Standing on it may lead to serious inju.
08
DISCONNECTED
Board and Remote are
Disconnected
Over-Current Protection
Active
Motor Stalled
High Temperature Warning: Motor
BOARD OVER CURRENT
Motor High
Temperature
Motor Stalled
Throttle Failure !
Throttle Wheel Requires Calibration
Board Over Voltage !
Abnormal Voltage
Board Over-Voltage Batte Cells out of Balance
5%
Remote Low Power
Remote Power Under 5% Board Power Under 25%
Malfunctions
In the event you encounter any of these errors, please reach out to the
Backfire Support Team for assistance.
BACKFIRE
13
提示说明
BACKFIRE
13
Board Low Power
25%
产品使用指南
09
High Temperature
Warning: Batte
Batte High Temp
erature
Unlock Failed
Fingerprint Unlock Failed
10%
Remote Low Power
Remote Power Under 25%
Remote Power Under 10%
Board Low Power
10%
Board Low Power
5%
Board Power Under 5%
Board Power Under 10%
25%
Remote Low Power
ESC High
Temperature
High Temperature Warning: ESC
Gear Ratio and Pole Pair Configurations
BACKFIRE
14
Model Drive Type Gear Ratio Pole Pairs
G2 Black Hub - 10
ERA Hub - 10
G3 Hub - 10
Ranger X3 Hub - 20
Zealot Belt 2.6 7
Zealot S Belt 2.6 7
Hammer Belt 3.6 7
Hammer S Belt 3.6 7
CONTACT US
Ocial Website:https://www.backreboards.com/
Instagram You Tube
Halo Remote
User Guide
10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Backfire Halo User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI