Stahl 210755 Owner's manual

Brand
Stahl
Model
210755
Type
Owner's manual

Stahl 210755 is a 7-pole, explosion-protected miniCLIX plug connector that can disconnect non-intrinsically safe circuits up to 400 V/16 A. It is suitable for harsh industry environments, with an IP66/IP68 rating for Zones 1 and 2 and can be used as a hot swap plug connection for signal and data cables.

The device is easy to install and maintain in Zone 1, allowing for safe and fast disconnection under load. It has a rated operational voltage of 230 – 250 V AC and a switching capacity of AC-1: 400 V / 16 A, DC-1: 400 V / 1 A, and DC-3: 60 V / 0.5 A.

Stahl 210755 is a 7-pole, explosion-protected miniCLIX plug connector that can disconnect non-intrinsically safe circuits up to 400 V/16 A. It is suitable for harsh industry environments, with an IP66/IP68 rating for Zones 1 and 2 and can be used as a hot swap plug connection for signal and data cables.

The device is easy to install and maintain in Zone 1, allowing for safe and fast disconnection under load. It has a rated operational voltage of 230 – 250 V AC and a switching capacity of AC-1: 400 V / 16 A, DC-1: 400 V / 1 A, and DC-3: 60 V / 0.5 A.

2022-11-16 R. STAHL Schaltgeräte GmbH | Am Bahnhof 30 | 74638 WALDENBURG 1/2
V 0.65 EN Tel. +49 7942 943 1700 | +49 7942 943 1777 | Email: [email protected] | r-stahl.com
Installation Equipment
miniCLIX plug connector Device plug < 2 dm³
8591/291-06-0000 Art. No. 210755
Electrical Data
Rated operational voltage AC 230 – 250 V
Switching capacity IEC/ EN 60947
AC- 1: 400 V / 16 A
DC- 1: 400 V / 1 A
DC- 3: 60 V / 0.5 A
Frequency Hz (for AC) 50
60
Ambient Conditions
Ambient temperature -55 °C ... +40 °C
Note - 20 ... + 40 °C plastic version
- 20 ... + 75 °C plastic version Ith max. 1 A
- 55 ... + 40 °C metal version
- 55 ... + 75 °C metal version Ith max. 1 A
Mechanical Data
Degree of protection (IP) IP66
Degree of protection note IP68 (2 m water column, 1 hour)
according to IEC/ EN 60529
(with protective caps closed and secured as well as properly fitted and secured compo-
nents)
Explosion Protection
Application range (zones) 1
2
IECEx gas certificate IECEx BKI 07.0001X
IECEx gas explosion protection Ex db eb IIC T6 Gb
ATEX gas certificate PTB 07 ATEX 1028 X
ATEX gas explosion protection E II 2 G Ex db eb IIC T6 Gb
Certificates ATEX (PTB), IECEx (BKI)
Technical Data
• Simple installation and maintenance in Zone 1, safe and fast
disconnection under load
• 6+1- pole, rated voltage up to 400 V AC, rated current up to
16 A
• Suitable for harsh industry environments, IP66/ IP68, for
Zones 1 and 2
R. STAHL Series 8591/ 2 7- pole, explosion- protected miniCLIX plug connectors disconnect non-
instrinsically safe circuits up to 400 V/ 16 A and are used as a hot swap plug connection for signal
and data cables. They are available in various versions and materials: Device plugs, flange sock-
ets, plugs/ couplers made of polyamide, nickel- plated brass or stainless steel. The cable can be
connected using a crimp or spring clamp terminal. Preinstalled cables for device plugs and flange
sockets enable fast and safe installation in the end devices.
WebCode 8591B
2022-11-16 R. STAHL Schaltgeräte GmbH | Am Bahnhof 30 | 74638 WALDENBURG 2/2
V 0.65 EN Tel. +49 7942 943 1700 | +49 7942 943 1777 | Email: [email protected] | r-stahl.com
Installation Equipment
miniCLIX plug connector Device plug < 2 dm³
8591/291-06-0000 Art. No. 210755
Dimensional Drawings (All Dimensions in mm [inches]) – Subject to Alterations
We reserve the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The
illustrations cannot be considered binding.
70
8
SW 32
M 25 x 1,5
37
Flange socket (plastic)
Mechanical Data
Enclosure material Plastic
Cable entry M25
Recommended colour ring coding Red
Coding (clock hour position) 6
Detailed number of poles 6 P + PE
Weight 0.1 kg
Weight 0.22 lb
Mounting / Installation
Connection type 1.5 mm² crimp
Components
Locking device present No
Protective cap available No
Art. No.
165670
for plug, device plug: plastic (polyamide) 154573
Anti- twist protection Art. No.
for flange socket, device plug 154587
Crimping tool Art. No.
for all crimp connection versions up to 4 mm² 109116
for all crimp connection versions up to 4 mm² 109116
Accessories
  • Page 1 1
  • Page 2 2

Stahl 210755 Owner's manual

Brand
Stahl
Model
210755
Type
Owner's manual

Stahl 210755 is a 7-pole, explosion-protected miniCLIX plug connector that can disconnect non-intrinsically safe circuits up to 400 V/16 A. It is suitable for harsh industry environments, with an IP66/IP68 rating for Zones 1 and 2 and can be used as a hot swap plug connection for signal and data cables.

The device is easy to install and maintain in Zone 1, allowing for safe and fast disconnection under load. It has a rated operational voltage of 230 – 250 V AC and a switching capacity of AC-1: 400 V / 16 A, DC-1: 400 V / 1 A, and DC-3: 60 V / 0.5 A.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers