2. Halo
  3. Multi Flat Dispenser
Multi Flat Dispenser

Halo Multi Flat Dispenser Operating instructions

  • Hello! I've reviewed the installation instructions for the HALO multiflat dispenser. This document details how to install the dispenser, including preparation steps like marking holes, drilling, and adding paper and using provided key. I'm ready to answer your questions about the dispenser and its installation process.
  • What is included in the box contents?
    What tools are required for installation?
    How should the unit be attached to the wall?
Installation instructions for
HALO multiflat dispenser
Box Contents:
1 Dispenser
1 Opening Key
4 Fitting Screws and Plugs
Tools Required:
Drill
Screwdriver
Open the unit with the key provided.
1
Mark out the holes for fixings.
Please see the pre-installed
spirit level to aid installation.
2
Drill the marked out holes
to the size of the fixings
provided then use a
screwdriver to fix the unit
to the wall. The unit should
be hand tight to the wall.
3
Add the multiflat/bulkpack paper and
close the unit. The unit is now
operational.
4
/