Altair PollEx 2021.1 User guide

Altair PollEx 2021.1

Make Board Paneling User Guide

altair.com

Intellectual Property Rights Notice

Copyrights, Trademarks, Trade Secrets, Patents & Third Party Software Licenses

Copyrights in the below are held by Altair Engineering, Inc., except where otherwise explicitly stated.

This Intellectual Property Rights Notice is exemplary, not exhaustive.

Altair Simulation Products

Note: Pre-release versions of Altair software are provided ‘as is’, without warranty of any kind.

Usage of pre-release versions is strictly limited to non-production purposes.

Proprietary Information of Altair Engineering

Altair PollEx 2021.1

Intellectual Property Rights Notice p.iii

Print3D

Altair Packaged Solution Offerings (PSOs)

Proprietary Information of Altair Engineering

Altair PollEx 2021.1

Intellectual Property Rights Notice p.iv

Altair HPC & Cloud Products

Altair Data Analytics Products

Inc.

Altair Engineering Inc.

Inc.

Note:

desktop, which also has Altair Access web and Altair Access mobile

Access

Proprietary Information of Altair Engineering

Altair PollEx 2021.1

Intellectual Property Rights Notice p.v

Altair SmartWorks™

Altair intellectual property rights are protected under U.S. and international laws and treaties.

Additionally, Altair software may be protected by patents or other intellectual property rights. All other

marks are the property of their respective owners.

ALTAIR ENGINEERING INC. Proprietary and Confidential. Contains Trade Secret Information.

Not for use or disclosure outside of Altair and its licensed clients. Information contained in Altair

software shall not be decompiled, disassembled, “unlocked”, reverse translated, reverse engineered,

or publicly displayed or publicly performed in any manner. Usage of the software is only as explicitly

permitted in the end user software license agreement. Copyright notice does not imply publication.

Third party software licenses

AcuConsole contains material licensed from Intelligent Light (www.ilight.com) and used by permission.

Software Security Measures:

Altair Engineering Inc. and its subsidiaries and affiliates reserve the right to embed software security

mechanisms in the Software for the purpose of detecting the installation and/or use of illegal copies of the

Software. The Software may collect and transmit non-proprietary data about those illegal copies. Data collected

will not include any customer data created by or used in connection with the Software and will not be provided

to any third party, except as may be required by law or legal process or to enforce our rights with respect to

the use of any illegal copies of the Software. By using the Software, each user consents to such detection and

collection of data, as well as its transmission and use if an illegal copy of the Software is detected. No steps

may be taken to avoid or detect the purpose of any such security mechanisms.

Rev: 1.1 March 18, 2021

Proprietary Information of Altair Engineering

Technical Support

Altair provides comprehensive software support via web FAQs, tutorials, training classes, telephone, and

e-mail.

Altair One Customer Portal

Altair One (https://altairone.com/) is Altair’s customer portal giving you access to product downloads, a

Knowledge Base, and customer support. We strongly recommend that all users create an Altair One

account and use it as their primary means of requesting technical support.

Once your customer portal account is set up, you can directly get to your support page via this link:

www.altair.com/customer-support/

Altair Community

Participate in an online community where you can share insights, collaborate with colleagues and

peers, and find more ways to take full advantage of Altair’s products.

Visit the Altair Community (https://community.altair.com/community) where you can access

online discussions, a knowledge base of product information, and an online form to contact

Support. These valuable resources help you discover, learn and grow, all while having the

opportunity to network with fellow explorers like yourself.

Altair Training Classes

Altair’s in-person, online, and self-paced trainings provide hands-on introduction to our products,

focusing on overall functionality. Trainings are conducted at our corporate and regional offices or at your

facility.

For more information please visit: https://learn.altair.com/

If you are interested in training at your facility, please contact your account manager for more details.

If you do not know who your account manager is, please contact your local support office and they will

connect you with your account manager.

Telephone and E-mail

If you are unable to contact Altair support via the customer portal, you may reach out to technical

support via phone or e-mail. Use the following table as a reference to locate the support office for your

region.

When contacting Altair support, please specify the product and version number you are using along

with a detailed description of the problem. It is beneficial for the support engineer to know what type

of workstation, operating system, RAM, and graphics board you have, so please include that in your

communication.

p.vii

Proprietary Information of Altair Engineering

Altair PollEx 2021.1

Technical Support

Location

Telephone

E-mail

Australia

+61 3 9866 5557

anzsupport@altair.com

Brazil

+55 113 884 0414

br_support@altair.com

Canada

+1 416 447 6463

support@altairengineering.ca

China

+86 400 619 6186

support@altair.com.cn

France

+33 141 33 0992

francesupport@altair.com

Germany

+49 703 162 0822

hwsupport@altair.de

Greece

+30 231 047 3311

eesupport@altair.com

India

+91 806 629 4500

+1 800 425 0234 (toll free)

[email protected]r.com

Israel

israelsupport@altair.com

Italy

+39 800 905 595

support@altairengineering.it

Japan

+81 3 6225 5830

support@altairjp.co.jp

Malaysia

+60 32 742 7890

aseansupport@altair.com

Mexico

+52 55 5658 6808

mx-support@altair.com

New Zealand

+64 9 413 7981

anzsupport@altair.com

South Africa

+27 21 831 1500

support@altair.co.za

South Korea

+82 704 050 9200

support@altair.co.kr

Spain

+34 910 810 080

support-spain@altair.com

Sweden

+46 46 460 2828

support@altair.se

United Kingdom

+44 192 646 8600

[email protected]r.com

United States

+1 248 614 2425

hwsupport@altair.com

If your company is being serviced by an Altair partner, you can find that information on our web site at

https://www.altair.com/PartnerSearch/.

See www.altair.com for complete information on Altair, our team, and our products.

Proprietary Information of Altair Engineering

Contents

Intellectual Property Rights Notice .................................................................................... ii

Technical Support ............................................................................................................. vi

Conventions Used in this Guide .......................................................................................... 9

Make Board Paneling ....................................................................................................... 10

1. Launch Make Board Paneling ......................................................................................... 10

2. Make Board Paneling GUI .............................................................................................. 11

Altair PollEx 2021.1 User Guide

Make Board Paneling

p.9

Proprietary Information of Altair Engineering

Conventions Used in this Guide

This guide uses the following conventions:

Bold

Italic

All commands from the user interface. Options, menus, buttons, and dialog box names are

bolded, but not italicized.

Example: On the Welcome screen, click Next.

Courier

The path of a program or folder; a web address; a file name or component; text that the

user is expected to enter.

Example: The default path is C:\Program Files\Altair\2021.1\PollEx

Questions regarding the document may be directed to PollEx team at PollEx_support_kr@altair.com.

Altair PollEx 2021.1 User Guide

Make Board Paneling

p.10

Proprietary Information of Altair Engineering

Make Board Paneling

Make Board Paneling is a function to modify the data designed with a single sub board into an array type

to use manufacturing related features such as Metal Mask Manager, Mounting Emulator, Block JIG Generator,

Router-Machine JIG Generator and so on.

1. Launch Make Board Paneling

Select Manufacture – Make Board Paneling menu.

When executed the Make Board Paneling, the design file is saved with *.pdbb file through the Save As

function.

If not saved the file, the Make Board Paneling cannot be used.

Altair PollEx 2021.1 User Guide

Make Board Paneling

p.11

Proprietary Information of Altair Engineering

2. Make Board Paneling GUI

① Mirror: This option is to create duplicated the original PCB data by mirroring.

X Mirror: Mirroring the board based on the X axis.

Y Mirror: Mirroring the board based on the Y axis.

Altair PollEx 2021.1 User Guide

Make Board Paneling

p.12

Proprietary Information of Altair Engineering

② Rotation: This option is to create duplicated the original PCB data by rotation.

Rotation Angle: Enter the angle to be rotated. The rotate direction is counterclockwise.

③ Paneling Object Definition: This option is to define the object to be duplicated.

Component: Option to include components placed in PCB data.

a. Except Component: Option to exclude components from duplicate.

Altair PollEx 2021.1 User Guide

Make Board Paneling

p.13

Proprietary Information of Altair Engineering

Excluded components can be specified through the String Filter Set Up dialog of Part

Name, Reference Name, Package Name and Footprint Name.

Route: Option to include Route in PCB data.

Board Figure: Option to include Board Figure in PCB data.

Board Outline: Option to include Board Outline in PCB data.

Keep original board’s data: Option to keep the original board outline of PCB data without

deletion when the Board Outline option is not selected.

④ Paneling Object Area: This option is to specify the PCB data area where to be duplicated.

Select Rect: Option to select the rectangular area as duplicated area.

Select Area: Option to select a polygon area by user as duplicated area.

⑤ Placement: This item is to set where the duplicated objects are placed.

Move To: Set the X and Y coordinates where the duplicated PCB data will be placed. The

origin coordinate of the original PCB data is used as the reference point.

Object Select: This option automatically calculates the movement coordinates by selecting

the pad of the PCB data and the pad of the Bard Board Gerber (Metal Mask) data in an array.

a. Cad Object: Select the reference pad on the PCB design data.

b. Gerber Object: Select a pad object that matches the pad selected in CAD data.

Array: This function is used when the duplicated data is to arrange with the same distance

and angle.

a. dX, dY: Set the X and Y axis spacing of copied sub board.

Altair PollEx 2021.1 User Guide

Make Board Paneling

p.14

Proprietary Information of Altair Engineering

b. Select Object: This function automatically calculates dX and dY spacing by selecting two

parts from PCB design data.

c. Number of Sub Board: Set the number of sub boards to be duplicated in horizontal and

vertical directions.

Add Board: Add the board that set in ①~⑤ above to the table.

Edit: Edit the settings saved board in the table list. Select a board to edit from the list and

modify the setting in ①~⑤.

Delete: Delete the selected board from the list.

⑥ Table

Mirror: Display the mirror status.

Rotation: Display the rotation angle.

Placement: Display the placed coordinates of the duplicated board.

After Complete Paneling, Remove Gerber Data: Option to delete the Gerber layer after

completing the array paneling in the case of using Gerber data.

Apply: Apply to the PCB design data with the saved settings in the table.

Initialize: Initialize the settings.

⑦ Define Panel Outline: This feature is to create panel outline by designating area of the bare

board’s location.

Start Location: Specify the starting coordinates of Panel Outline.

End Location: Specify the ending coordinates of Panel Outline.

Altair PollEx 2021.1 User Guide

Make Board Paneling

p.15

Proprietary Information of Altair Engineering

Line Width: Specify the width of Panel Outline.

Get Panel Outline from Gerber: This function is to designate the line selected in Gerber

data as the Panel Outline.

Altair PollEx 2021.1 User Guide

Make Board Paneling

p.16

Proprietary Information of Altair Engineering

a. Option

o Add: Option to add the selected Gerber object to the Panel Outline without initializing

the existing Panel Outline.

o Replace: Option to replace the selected Gerber object to the Panel Outline with

initializing the existing Panel Outline.

b. Extract Board Outline: Set how to extract Board Outline from Gerber data.

o Picking Object Mode: Extract the Board Outline by picking directly from Gerber

object.

• Certain Width: Option to select all objects having the same line width of the

selected Gerber object automatically when pressed All button.

o All object to Outline: Extract all objects of the selected Gerber layer as Board

outline.

c. Target Layer: Specify the layer where the extracted Gerber object will be saved.

Apply: Apply the outline settings to the PCB design data.

Altair PollEx 2021.1 User guide

Related papers

Other documents