VISUAL COMFORT CHD 2525 User manual

Brand: VISUAL COMFORT

Model: CHD 2525

Type: User manual

VISUAL COMFORT CHD 2525 is a single library wall light that provides adjustable lighting for various settings. It features a classic design with a metal shade and glass shade, allowing for customization of the lighting ambiance. The fixture can be easily installed with the included mounting hardware and requires a light bulb (not included). The adjustable knobs allow for precise positioning of the light, making it suitable for reading, task lighting, or ambient lighting.

VISUAL COMFORT CHD 2525 is a single library wall light that provides adjustable lighting for various settings. It features a classic design with a metal shade and glass shade, allowing for customization of the lighting ambiance. The fixture can be easily installed with the included mounting hardware and requires a light bulb (not included). The adjustable knobs allow for precise positioning of the light, making it suitable for reading, task lighting, or ambient lighting.

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Remove mounting plate (B) from fixture by removing screws (D).

3. Install mounting plate (B) to the junction box and secure with the

mounting screws (C).

4. Wrap fixture ground wire (bare copper) around the green grounding

screw (see diagram 1). Tighten. Continue fixture ground wire and

connect to supply ground wire (usually green or bare copper) using

wire nut (A).

NOTE: It is imperative that the fixture is grounded.

5. Connect fixture neutral wire (white) to the supply neutral wire

(usually white) using wire nut (A).

6. Connect fixture hot wire (black) to the supply hot wire (usually

black) using wire nut (A).

CAUTION: Do not reverse the hot and neutral connections.

7. Make sure all wire connections are tight, then carefully tuck into the

junction box.

8. Install fixture to mounting plate (B) by securing with screws (D).

9. Loosen thumb screws (G) and insert top of shade (F), then secure

with thumb screws (G).

NOTE: Do not overtighten otherwise shade could become damaged.

Parkington Single Library Wall Light

Item # CHD 2525

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED):

Phillips Screwdriver Slotted Screwdriver

NOTICE:

Bulb not included

Diagram 1 H

H

A B C D

G

E

LED

F

Metal ShadeGlass Shade

Parkington Single Library Wall Light

Item # CHD 2525

ASSEMBLY INSTRUCTIONS

This light fixture should be installed in accordance with all applicable,

local installation codes, and by a person familiar with the construction

and operation of it, as well as the hazards involved. Inspect item and

contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

10. To adjust fixture loosen knobs (H), adjust to desired position, then

tighten knobs (H).

11. Install light bulb into the socket.

Care Instructions: Clean only with a soft dry cloth or feather duster.

Do not use abrasive or chemical agents.

NOTICE:

Bulb not included

Diagram 1 H

H

A B C D

G

E

LED

F

Metal ShadeGlass Shade

1
2

VISUAL COMFORT CHD 2525 User manual

Brand: VISUAL COMFORT

Model: CHD 2525

Type: User manual

VISUAL COMFORT CHD 2525 is a single library wall light that provides adjustable lighting for various settings. It features a classic design with a metal shade and glass shade, allowing for customization of the lighting ambiance. The fixture can be easily installed with the included mounting hardware and requires a light bulb (not included). The adjustable knobs allow for precise positioning of the light, making it suitable for reading, task lighting, or ambient lighting.

Related papers

Other documents