2. Gardeners
  3. Tall Chicken Wire Critter Fence

Gardeners Tall Chicken Wire Critter Fence Operating instructions

  • Hello! I have reviewed the user manual for the Tall Chicken Wire Critter Fence. This document provides detailed instructions on how to assemble the fence, including how to connect the panels, install the gate, and use the safety cap. I'm ready to answer your questions about the assembly or features of the fence.
  • What is the metal cap used for?
    How do I join the panels together?
    How is the entrance of the gate secured?
Turn Over Please
A
1 Pc
C
4 Pcs 5 Pcs 2 Pcs
Tall Chicken Wire Critter Fence
B
1 Pc
6 Pcs
1 Pc
Parts List
(5) Poles
(5) Stakes
(6) Finials
(2) Pins
(1) Protective Metal Cap (used for installation only)
(4) Side Panels with loops on 2 sides
(1) Gate Panel with loop & barrel
(1) Gate Panel with loop, barrel & finial extension
Step 1: Thread the stakes to the poles.
Step 2: Match the loops on the sides & join secons by inserng the poles.
Make sure exposed horizontal bars in the panels face outside.
Metal Cap only used as a safety cap on the top open ended threads on the
poles when hammering the poles into the so ground.
Step 3: Match the loops on the sides of both the gate panels to the side panels
& join by inserng a pole.
Step 4: The free sides of gate panels with barrels is used as entrance & can be
locked by matching the barrels together & inserng clip
s at 2 ends.
Step 5: Screw the finials on the top barrel of each connecng secons.
Pole
Stake
Step-2
Step-4
Step-5
Rev 08/2022#8611020 / 8613260
/