USB 2.0 2 Port Card
us USER'S MANUAL
1
USB 2.0 Card Bus is a 2-in-1 controller. It has two USB 1.1 controllers and one USB
2.0 controller integrated into a single board. Please follow the instruction below for
proper driver installation.
Hardware
USB 2.0 2 ports cardbus
Software
Driver software
!
!!
!
32 Bit CardBus USB 2.0 card for laptop computers, complies with PC card
standard
Complies with USB2.0 specifications
Provides two USB2.0 ports on the card
Provides up to 480Mbps data transfer rate
Supports Windows 98SE, ME, 2000, XP and MAC OS 10.1 & 10.2
"
""
" #$%%
" &$
'
()*+%%
USB 1.1 DRIVER INSTALLATION
4.1.1 At the “Add New Hardware Wizard” window, click "NEXT".
4.1.2 Choose "Select the best driver for your devices" click"NEXT".
4.1.3 Insert Windows 98SE Installation CD and select “Specify Driver
Location”
4.1.4 Use the BROWSE icon, direct Windows to search the Window 98
CD's Win98 folder.
USB 2.0 2 Ports CardBus User’s Manual 2
4.1.5 Windows will ask for drivers again; repeat the above process.
4.1.6 Windows will not be able to install the last “PCI Serial Bus controller”;
it is ok.
4.1.7 After installation, restart the system.
4.1.8 To Verify for Successful USB 1.1 controller Installation:
Start icon/Settings/Control Panel/System/Device manager
- Universal serial bus controller
PCI to USB Open Host Controller
PCI to USB Open Host Controller
USB Root Hub
USB Root Hub
- Other Device
- PCI Universal Serial Bus
USB 2.0 DRIVER INSTALLATION
4.1.9 Insert the driver of USB 2.0 2 Ports Cardbus.
(USB 2.0 2 port CardBus)
4.1.10 Restart computer to accept new setting.
4.1.11 Once restarted, Windows will install the new driver automatically.
4.1.12 To Verify for Successful Installation:
Start icon/Settings/Control Panel/System/Device manager.
- Universal serial bus controller
PCI to USB Open Host Controller
PCI to USB Open Host Controller
USB Enhanced Host Controller
USB 2.0 Root Hub Device
USB Root Hub
USB Root Hub
USB 2.0 2 Ports CardBus User’s Manual 3
" &$
'
*+%%
4.2.1 After installing the USB 2.0 controller, Windows will install the USB 1.1
working driver automatically.
4.2.2 When "PCI Universal Serial Bus" comes up, clicks "CANCEL" to exit
the Installation Wizard
4.2.3 Insert the driver of USB 2.0 2 Ports Cardbus.
(USB 2.0 2 port CardBus)
4.2.4 Restart computer to accept new setting.
4.2.5 Windows will install the USB 2.0 driver automatically
4.2.6 To Verify for Successful Installation:
Start icon/Settings/Control Panel/System/Device manager
- Universal serial bus controller
PCI to USB Open Host Controller
PCI to USB Open Host Controller
USB Enhanced Host Controller
USB 2.0 Root Hub Device
USB Root Hub
USB Root Hub
USB 2.0 2 Ports CardBus User’s Manual 4
" &$
'
*+%%
4.3.1 After installing the USB 2.0 controller, Windows will install the USB 1.1
driver automatically.
4.3.2 When "Found New Hardware Wizard" comes up, clicks "CANCEL" to
exit the Installation Wizard
4.3.3 Insert the driver of USB 2.0 2 Ports Cardbus.
(USB 2.0 2 port CardBus)
4.3.4 Restart computer to accept new setting.
4.3.5 Windows will install the USB 2.0 driver automatically
4.3.6 To Verify for Successful Installation:
Start icon/Settings/Control Panel/System/Hardware/Device manager
- Universal serial bus controller
PCI to USB Open Host Controller
PCI to USB Open Host Controller
USB Enhanced Host Controller
USB 2.0 Root Hub Device
USB Root Hub
USB Root Hub
USB 2.0 2 Ports CardBus User’s Manual 5
"" &$
'
,*+%%
4.4.1
After installing the USB 2.0 controller, Windows will install the USB 1.1driver
automatically.
4.4.2 Insert the driver of USB 2.0 2 Ports Cardbus.
(USB 2.0 2 port CardBus)
4.4.3 At the “Software Installation” screen, click “Continue Anyway”.
4.4.4 Once the installation is completed, restart computer to accept new
default setting.
4.4.5 After computer restarted, “Found New Hardware Wizard” will show up.
4.4.6 Select “Install the software automatically…” and click” NEXT”.
4.4.7 At the “Hardware Installation” screen, click “Continue Anyway”, and
“Finish”
4.4.8 “Found New Hardware Wizard” will come up again; repeat thesteps
from 7 to 8 to complete the installation
4.4.9 To Verify for Successful Installation:
Start icon/Settings/Control Panel/System/Hardware/Device manager
- Universal serial bus controller
PCI to USB Open Host Controller
PCI to USB Open Host Controller
USB Enhanced Host Controller
USB 2.0 Root Hub Device
USB Root Hub
USB Root Hub
"- &$
'
,+*+%%
Windows XP Service Pack has the Microsoft USB 2.0 controller driver built-
in. It will over-ride the existing USB 2.0 controller driver and install the
Microsoft USB 2.0 controller driver once the XP Service Pack is installed
Start icon/Settings/Control Panel/System/Hardware/Device manager
- Universal serial bus controller
PCI to USB Open Host Controller
PCI to USB Open Host Controller
USB Enhanced Host Controller
USB 2.0 Root Hub Device
USB Root Hub
USB Root Hub
USB 2.0 2 Ports CardBus User’s Manual 6
- *%.
Information in this document is subject to change without notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding
the accuracy and completeness of this document and shall in no event be liable for
any loss of profit or any other commercial damage, including but not limited to
special, incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any form by any
means, electronic or mechanical, including photocopying, recording or information
recording and retrieval systems without the express written permission of the
manufacturer.
All brand names and product names used in this document are trademarks, or
registered trademarks of their respective holders.
/
//
/ !.
!. !.
!.
This device generates and uses radio frequency and may cause interference to radio
and television reception if not installed and used properly. This has been tested and
found to comply with the limits of a Class B computing device in accordance with the
specifications in Part 15 of FCC Rules. These specifications are designed to provide
reasonable protection against such interference in a residential installation. However,
there is no guarantee that interference will not occur in a particular installation. If this
device does cause harmful interference to radio or television reception, which can be
determined by plugging the device in and out, the user can try to correct the
interference by one or more of the followings:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the computer into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
-
1
-
2
-
3
-
4
-
5
-
6
Bafo BF-5211 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Belkin F5U222 Owner's manual
-
Rosewill RC-600 User manual
-
ATEN PU212 User manual
-
Hama 00039706 Owner's manual
-
SIIG USB 2.0 CardBus User manual
-
Ratoc Systems CBU2U Rev.5.0 User manual
-
Actebis 15.06.2229 Datasheet
-
Hama 00039747 Owner's manual
-
National DC5-163 Instructions Manual
-
