Bissell 2529 Jetscrub Pet User manual

Brand: Bissell

Model: 2529 Jetscrub Pet

Category: Vacuum cleaners

Type: User manual

BISSELL.com 1

Go online for a comprehensive walkthrough

of your new purchase!

This guide features everything you need to get ready for first use,

including setting up, using and maintaining your machine, but join

us online for a comprehensive walkthrough. Our online support

includes tips and troubleshooting, videos, product registration,

parts, and more. Go to support.BISSELL.com.

JETSCRUB™ PET

2529 SERIES

2 BISSELL.com

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK

OR INJURY:

» Connect to a properly grounded outlet only. See

grounding instructions. Do not modify the 3-prong

grounded plug.

» Do not leave appliance when it is plugged in. Unplug

from outlet when not in use and before servicing.

» Use indoors only.

» Do not allow to be used as a toy. Close attention is

necessary when used by or near children.

» Do not use for any purpose other than described

in this user guide. Use only manufacturer’s

recommended attachments.

» Do not use with damaged cord or plug. If appliance

is not working as it should, or has been dropped,

damaged, left outdoors, or dropped into water, have

it repaired at an authorized service center.

» Do not pull or carry by cord, use cord as a handle,

close a door on cord, or pull cord around sharp

edges or corners. Do not run appliance over cord.

Keep cord away from heated surfaces.

» Do not unplug by pulling on cord. To unplug, grasp

the plug, not the cord.

» Do not handle plug or appliance with wet hands.

» Do not put any object into openings. Do not use with

any opening blocked; keep openings free of dust,

lint, hair, and anything that may reduce air flow.

» Keep hair, loose clothing, fingers, and all parts of

body away from openings and moving parts.

» Turn OFF all controls before plugging or unplugging

appliance.

» Use extra care when cleaning on stairs.

» Do not use to pick up flammable or combustible

materials (lighter fluid, gasoline, kerosene, etc.) or

use in areas where they may be present.

» Do not use appliance in an enclosed space filled with

vapors given off by oil-based paint, paint thinner,

some moth-proofing substances, flammable dust,

or other explosive or toxic vapors.

» Do not use to pick up toxic material (chlorine bleach,

ammonia, drain cleaner, etc.).

» Do not pick up anything that is burning or smoking,

such as cigarettes, matches, or hot ashes.

» Use only BISSELL® cleaning products intended for use

with this appliance to prevent internal component

damage. See the Cleaning Formula section of this

guide.

» Do not immerse. Use only on surfaces moistened by

the cleaning process.

» Keep appliance on a level surface.

» Do not carry the appliance while in use.

» Always install float before any wet pick-up

operation.

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.

When using an electrical appliance, basic precautions should be observed, including the following:

SAVE THESE INSTRUCTIONS

THIS MODEL IS FOR HOUSEHOLD USE ONLY. COMMERCIAL USE OF THIS UNIT VOIDS THE MANUFACTURER’S WARRANTY.

WARNING

Improper connection of the equipment-grounding conductor can result in a risk

of electrical shock. Check with a qualiﬁed electrician or service person if you aren’t

sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not ﬁt

the outlet, have a proper outlet installed by a qualiﬁed electrician. This appliance

is designed for use on a nominal 120-volt circuit, and has a grounding attachment

plug that looks like the plug in the illustration. Make certain that the appliance

is connected to an outlet having the same conﬁguration as the plug. No plug

adapter should be used with this appliance.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded

wiring system. If it should malfunction or break

down, grounding provides a safe path of least

resistance for electrical current, reducing the risk

of electrical shock. The cord for this appliance

has an equipment-grounding conductor and a

grounding plug. It must only be plugged into an outlet that is properly installed

and grounded in accordance with all local codes and ordinances.

Grounded

Outlets

Grounding Pin

Problem Possible Cause Remedies

Loss of suction

power

Dirty Water Tank has picked up maximum

amount of dirty water and has reached full

line.

Empty Dirty Water Tank.

Nozzle is not latched in place. Turn Power OFF / Unplug machine and re-install Nozzle.

Tanks may not be seated properly. Turn Power OFF / Remove both tanks and reseat them so they fit

properly on the machine.

Reduced spray OR

no spray

Clean Water Tank is empty. Refill tank.

Clean Water Tank isn’t seated completely. Turn power OFF / Remove and reseat tank.

System isn’t completely primed. Hold Spray Trigger for 10 to 15 seconds to make sure the solution has

flowed to the spray tips.

Nozzle isn’t latched in place. Turn power OFF / Unplug machine and re-install Nozzle.

Not holding trigger to spray solution. Hold trigger continuously while using the machine.

Machine shuts

OFF unexpectedly

Circuit breaker may have tripped due to

brushroll blockage.

Unplug machine from outlet. Check to see if foreign object is caught in

Brush Roll. Remove object and make sure Brush Roll spins freely. Plug

machine back into outlet. Do not step on or apply pressure to Nozzle

while operating machine.

Troubleshooting

For a comprehensive walkthrough of your product and support tips visit support.BISSELL.com.

Other maintenance or service not included in the manual should be performed by an authorized service representative.

BISSELL.com 3

We’re so happy you chose the JetScrub™ Pet. We put this guide

together to help you set up, use and maintain your JetScrub Pet.

We’ve also included some tips we think will come in handy when you

first start using your JetScrub Pet, so let’s get started!

For a comprehensive walkthrough of your product

go to support.BISSELL.com.

Troubleshooting ............................................................... 2

What’s in the Box? .........................................................4

Assembly ..............................................................................4

Cleaning Formulas .........................................................5

Filling the Clean Water Tank....................................6

Cleaning Carpets and Area Rugs ........................ 7

Cleaning Your Stairs ......................................................8

Using CleanShot® ............................................................8

Emptying the Dirty Water Tank ............................9

Cleaning & Replacing the

Brush Roll and Nozzle ................................................10

Using the Rinse & Storage Tray ............................. 11

Storing Your Machine ................................................... 11

Warranty ...............................................................................11

4 BISSELL.com

What’s in the Box?

Standard accessories may vary by model.To identify what should be included with your purchase,

please refer to the “Carton Contents” list located on the carton top flap. Additional accessories

may be purchased at BISSELL.com.

Product View

1. Upper Handle

2. SmartClean® Fingertip Controls

3. Solution Spray Trigger

4. Quick Release™ Cord Wrap

5. Clean Water Tank

6. Dirty Water Tank

7. Float Stack

8. Lower Cord Wrap

9. Removable Brush Roll & Nozzle

10. Cleanshot®

11. Foot

Product View

For additional support videos and information about your product, visit support.BISSELL.com.

Assembly

Go to support.BISSELL.com for additional how-to videos.

click

1. Insert handle into handle

post until you hear a “click”.

2. Press button to extend

handle.

3. To easily unwrap the cord

for use, turn the Quick Release™

Cord Wrap downward.

Body Handle

Rinse &

Storage Tray

and Cup

(select models

only)

Carpet

Brush Roll &

Nozzle

Hard Floor

Brush Roll &

Nozzle

(select models

only)

Nozzle Clean

Out Tool

PET PRO

OXY Urine

Eliminator

BISSELL.com 5

Clean + Refresh

Powerful cleaning

and odor elimination

with Febreze

freshness

PET Stain & Odor

Removes tough pet

stains

Includes StainProtect

™

to protect against

future stains

PRO MAX

Clean + Protect

Our most powerful

formula for tough,

ground-in dirt & stains

Includes StainProtect

to protect against

future stains

PET PRO OXY

Urine Eliminator

Our best formula

for pet urine stains

& odors

Includes StainProtect

to protect against

future stains

Pet Stain & Odor

+ Antibacterial

Cleans and controls

odor causing bacteria

Use with

Cleaning Formulas

View our family of carpet cleaning formulas for your family of mess-makers at BISSELL.com.

Keep plenty of BISSELL formulas on hand so you can clean whenever it fits your schedule. Always

use genuine BISSELL formulas in your machine. Other formulas may harm the machine and void the

warranty. Do not use Hard Floor Formula on area rugs or carpet.

OXY Boost

Removes old,

set-in stains

permanently

PRO MAX

Boost

Add to formula

for 2X deep

cleaning power

PET OXY

Boost

Removes pet

stains and odors

permanently

PET Stain

Pretreat

Permanently

removes tough

pet stains &

odors with

Enzyme Action

PET PRO

OXY Stain

Destroyer

Permanently

removes tough

pet stains &

odors with OXY

PET Pretreat

+ Sanitize

Penetrates to

sanitize and

loosen tough

stains

Pretreat

Pretreat spots and stains to improve carpet

cleaning performance.

Boost

Add Boost carpet cleaning formula enhancers to

any formula to increase its effectiveness.

WARNING To reduce the risk of ﬁ re and electric shock due to internal component damage, use only BISSELL®

cleaning formulas intended for use with the carpet cleaning device.

Certain trademarks used under license from The Procter & Gamble Company or its affiliates.

6 BISSELL.com

Filling the Clean Water Tank

Go to support.BISSELL.com for additional how-to videos.

Note: Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. Do not

use boiling water. Do not heat water or tank in microwave.

1. The Clean Water Tank is on

the back of the machine.

2. Lift the tank straight up to

remove from the machine.

3. Unscrew the cap from the

Clean Water Tank.

4. Fill the Clean Water Tank with water and formula.

Cleaning Formula

Fill with hot tap water to the Water

Fill Line above Carpet Cleaning.

Add formula to the Formula Fill Line

above Carpet Cleaning. If you’re using

a Boost formula additive, add one

ounce to your tank.

Antibacterial Formula with EasyFill System™

Fill with hot tap water to the Water Fill Line above the

EasyFill line. Twist the yellow cap back onto the tank.

Firmly insert the formula bottle into the cap on the tank

and squeeze until formula reaches the Formula line and

skip to step 6.

NOTICE: BISSELL Antibacterial formula is only for

BISSELL machines with EasyFill System™.

5. Screw the cap back onto

the Clean Water Tank.

6. Align tank with grooves on

back of the machine. Slide tank

down until you hear a “click”.

BISSELL.com 7

1. Ensure you are using the

Carpet Nozzle and Brush Roll.

2. Plug machine into a

properly grounded outlet.

3. Turn the machine ON and

OFF by pressing Deep Clean or

Express Clean.

10s

4. Gently place your foot

on the Foot of the machine

and pull back to recline the

machine.

5. Hold the Spray Trigger

for 10 seconds to prime the

system with cleaning solution

Note: When solution is flowing,

bubbles will form at the edges

of the Nozzle. Holding the

trigger continuously may result

in overwetting your carpet.

6. Make forward and backward

passes based on your selected

cleaning mode. See “Cleaning

Modes & Instructions” below.

When finished, press Deep

Clean or Express Clean to turn

unit OFF.

Cleaning Carpets and Area Rugs

Go to support.BISSELL.com for how-to videos and cleaning tips.

Tips Before Cleaning

• If cleaning an entire room, consider moving your furniture to another area.

• Use a dry vacuum cleaner over area before using your deep cleaner.

• Pretreat stains with the CleanShot® pretreater or a BISSELL® Pretreat spray to improve performance

on tough, set-in stains.

• Before cleaning area rugs, check the manufacturer’s tag and test an inconspicuous spot on the rug

for colorfastness. Don’t use on silk or delicate rugs.

• Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the

brush may result in premature belt failure.

Cleaning Modes & Instructions

Deep Clean Mode

Delivers a deep clean to your

carpet.

1. Hold Spray Trigger

• 1 pass forward

• 1 pass back

2. Release Spray Trigger

• 1 pass forward

• 1 pass back

Deep Clean Mode with

Antibacterial Formula

1. Hold Spray Trigger

• 1 pass forward

• 1 pass back

• 1 forward

2. Release Spray Trigger

• 1 pass back

Express Clean Mode

Provides a lighter clean that

dries in about 30 minutes.

1. Hold Spray Trigger

• 1 pass forward

• 1 pass back

2. Release Spray Trigger

• 1 pass forward

• 1 pass back

8 BISSELL.com

1. Ensure you are using the

Carpet Nozzle and Brush Roll

for carpeted stairs and the

Hard Floor Nozzle and Brush

Roll for hard floor stairs.

2. Plug machine into a

properly grounded outlet.

3. Press button to retract

handle.

4. Turn the machine ON and

OFF by pressing Deep Clean or

Express Clean.

5. Hold machine by placing

one hand on the Carry Handle

under the Dirty Water Tank

and one on the Upper Handle

of the machine.

6. While holding the Spray

Trigger, make 1 pass forward.

Release the Spray Trigger and

make 1 pass back.

Cleaning Your Stairs

Go to support.BISSELL.com for additional how-to videos.

Using CleanShot®

Go to support.BISSELL.com for a full list of how-to videos.

WARNING To reduce the risk of ﬁre and electric shock:

When cleaning a hard surface, the Hard Floor Nozzle and Microﬁber Brush Roll must be used and is only to be used with

BISSELL® Multi-Surface Floor Cleaning Formula intended for use with this appliance. Visit BISSELL.com to purchase.

1. Press and hold the

CleanShot button located on

the Upper Handle.

2. Maneuver your machine to

cover the stain with CleanShot

spray. Release the button

when the stain is completely

soaked. For tough, set-in

stains, let soak for 5minutes.

3. Maneuver the foot over the

stain to extract.

After using CleanShot,

continue to clean carpet per

instructions on page 7.

BISSELL.com 9

Emptying the Dirty Water Tank

Go to support.BISSELL.com for a full list of how-to videos.

WARNING To reduce the risk of ﬁre, electric shock or injury, turn power OFF and disconnect plug from

electrical outlet before performing maintenance or troubleshooting.

1. To release Dirty Water Tank,

press down on recessed button

on the top of the tank.

Tilt the tank slightly toward

you. Grab the handle and tank

with both hands and pull the

Dirty Water Tank up and away

to remove.

2. Grab top of Dirty Water Tank in

recessed area on each side of the

Float Stack and pull upward to

remove top of tank.

The Float Stack prevents the tank

from overflowing. When the tank

is full, the Float Stack will shut

off your suction motor creating a

high-pitched sound indicating it is

time to empty your tank.

3. Pour dirty water and

debris out.

4. Rinse the inside of the Dirty

Water Tank. Rinse the float

located at the bottom of the

top of the Dirty Water Tank.

If the inside area where the

Dirty Water Tank sits is dirty,

wipe it clean with a rag.

5. Leave parts out to dry

before reassembling.

Once parts are dry, reassemble

and replace the top of Dirty

Water Tank.

6. Angle the tank back into

body of machine inserting

bottom first. Tilt the top of the

tank toward the machine and

push into place until you hear

a “click”.

10 BISSELL.com

Cleaning & Replacing the Brush Roll and Nozzle

Go to support.BISSELL.com for additional maintenance tips for your machine.

WARNING To reduce the risk of ﬁ re, electric shock or injury, turn power OFF and disconnect plug from

electrical outlet before performing maintenance or troubleshooting.

1. Grasp Nozzle on both sides

and pull upward to remove.

2. Pull Brush Roll out by

grabbing the Brush Roll tab

and pulling upward.

3. Rinse your Brush Roll and

Nozzle with warm water. The

Nozzle Clean Out Tool can

be used to remove hair and

debris. Note: These parts are

not dishwasher or automatic

washing machine safe.

If your Brush Roll chamber is

dirty, clean with a rag or towel.

4. Let your Brush Roll

and Nozzle dry before

reassembling.

5. Replace Brush Roll by

inserting the Brush Roll end

into the right side of the foot.

Then lock the pull tab into

place by pressing downward.

6. Replace the Nozzle by first

lining up both tabs with the

edges of the foot.

7. Rotate the Nozzle back into

place until you hear a “click”.

BISSELL.com 11

Using the Rinse & Storage Tray (select models)

Go to support.BISSELL.com for feature videos of your machine.

1. Place machine on Rinse &

Storage Tray.

2. Fill Rinse Cup with water.

Pour water into the tray to fill

to the MAX line.

3. Turn the machine ON by

pressing the Deep Clean

button. Recline the machine

while in the tray. Allow the

machine to run for 10-15

seconds until all water is

picked up. Repeat as needed.

4. Grasp Nozzle at the front

and pull upward to remove.

5. Pull Brush Roll out by

grabbing the Brush Roll tab

and pulling upward.

6. Place the Nozzle, Brush

Roll, and Rinse Cup in the tray

to dry.

WARNING To reduce the risk of ﬁ re, electric shock or injury, turn power OFF and disconnect plug from

electrical outlet before performing maintenance or troubleshooting.

Storing Your Machine

Visit support.BISSELL.com for additional maintenance tips for your machine.

Store your machine in a protected, dry area. When finished using the product, wrap cord around cord

wrap for storage.

NOTICE: To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to

internal components may result.

Warranty

5-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691

for complete warranty information.

Printed in China. Part Number 162-2239 12/19 RevA

Visit our website at: www.BISSELL.com

But wait, there’s more!

Join us online for a comprehensive walkthrough to your new product,

including troubleshooting, product registration, parts and more.

Go to support.BISSELL.com.

VIDEOS

INFOREGISTER PARTS SUPPORT

We’re Waggin’ Our Tails!

BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help

save homeless pets. When you buy a BISSELL product, you help save pets,

too. We’re proud to design products that help make pet messes, odors and

pet homelessness disappear. Visit BISSELLsavespets.com to learn more.

Bissell 2529 Jetscrub Pet User manual

Brand: Bissell

Model: 2529 Jetscrub Pet

Category: Vacuum cleaners

Type: User manual

Download PDF

report

Bissell 2529 Jetscrub Pet User manual

Bissell 2529 Jetscrub Pet User manual

Related papers

Other documents