Minka Group 5904-655 User manual

Minka Group
Brand
Minka Group
Model
5904-655
Type
User manual

Minka Group 5904-655 is a light fixture that can be used to illuminate any room in your home. It is easy to install and comes with all the necessary hardware. The fixture can accommodate up to six candelabra base bulbs, each with a maximum wattage of 60 watts. This means that the fixture can provide a significant amount of light. Additionally, the fixture is compatible with CFL and LED bulbs, which can help you save energy. The fixture also features a "flower" design that adds a touch of elegance to any room.

Minka Group 5904-655 is a light fixture that can be used to illuminate any room in your home. It is easy to install and comes with all the necessary hardware. The fixture can accommodate up to six candelabra base bulbs, each with a maximum wattage of 60 watts. This means that the fixture can provide a significant amount of light. Additionally, the fixture is compatible with CFL and LED bulbs, which can help you save energy. The fixture also features a "flower" design that adds a touch of elegance to any room.

INSTALLATION INSTRUCTIONS
Item#5904-655 (New. 12/30/2022)
READ AND SAVE THESE INSTRUCTIONS
WA R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 1
Fig. 2
PREPARATION
(Fig. 1)
1.
Shut off the power at the fuse box or circuit breaker. If
necessary, remove old fixture, including mounting hardware.
2.
Carefully remove fixture from carton and check that all parts are
included as shown in the illustration.
MOUNTING THE FIXTURE (Fig. 1)
3. Secure crossbar (A) assembly and to junction box (not included)
using mounting screws (B) (Size: #8-
32N*L1”). The side of
crossbar (A) marked with “GND” must face out.
CONNECTING THE WIRES (Fig. 2)
4. Connect the electrical wires as shown in Fig. 2
making sure that
all wire connectors are secured. If your junction
box has a
ground wire (green or bare copper), connect the fixture’s ground
the crossbar (A) using the green screw provided.
5. Tuck wire connections neatly into junction box. Raise canopy
(C) to junction box and secure with finial (D).
FINISHING THE INSTALLATION (Fig.1)
6. Secure “flower” (E) over the socket to the all thread ring (F).
7. Install (6) six
candelabra base bulbs up to 60 watts each or CFL
or LED equivalent (not included) in accordance with the fixture
specification—
DO NOT EXCEED THE MAXIMUM WATTAGE
RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!).
Your installation is now complete. Return power to the junction
box and test the fixture.
Note: Illustration (Fig. 1
) on this manual is for installation
purposes only. It may or may not be identical to the
fixture purchased.
LA-3499E
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green
(Ground)
Set# A-010
-Crossbar
-Ground screw
-Mounting Screw *2
  • Page 1 1

Minka Group 5904-655 User manual

Minka Group
Brand
Minka Group
Model
5904-655
Type
User manual

Minka Group 5904-655 is a light fixture that can be used to illuminate any room in your home. It is easy to install and comes with all the necessary hardware. The fixture can accommodate up to six candelabra base bulbs, each with a maximum wattage of 60 watts. This means that the fixture can provide a significant amount of light. Additionally, the fixture is compatible with CFL and LED bulbs, which can help you save energy. The fixture also features a "flower" design that adds a touch of elegance to any room.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents