Barton 96965 User guide

Type
User guide
OWNERS MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL. KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATION, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S
SERIAL NUMBER ON THE BACK OF THE MANUAL, OR THE MONTH AND YEAR OF PURCHASE IF
PRODUCT HAS NO SERIAL NUMBER
FOR QUESTIONS, PLEASE CALL CUSTOMER SERVICE: 909.628.4900
1500W LAMP HEATER
ITEM # 96965
SAFETY INFORMATION
Read all safety warnings and instrucons. Failure to follow the warnings and instrucons may result in
injury and/or property damage. Save all warnings and instrucons for future reference.
The warning and safety instrucons in this manual are not meant to cover all possible condions and
situaons that may occur. Common sense, cauon and care must be exercised when operang or
cleaning tools and equipment. Always contact your dealer, distributor, service agent or manufacturer
about problems or condions you do not understand before operang the product.
1
WARNING: This heater is not equipped with a device to control the room temperature. Do not use this
heater in small rooms when they are occupied by persons not capable of leaving the room on their
own, unless constant supervision is provided.
Failure to comply with the precauons and the instrucons provided with this heat lamp can result in
death, serious injury and propert damage or loss from hazards of re, explosion and burns.
To prevent and avoid the risk of burns, re, electric shock, or Injury:
• Use this device only for its intended purpose as described in this manual.
• Do not leave unit on when unaended. Unplug from outlet when not in use.
• Keep children away from and do not allow children to operate the lamp.
To disconnect from the power outlet, turn all controls to the “oposion and then remove the power
cord from the power source outlet.
NEVER operate this device with the protected heang element opening blocked. Keep this opening
free of lint, hair, etc. Never operate on or near a so surface such as a pillow, blanket, or bed where
this air opening may be blocked.
NEVER drop or insert any object into the protected heang element opening. Do not touch the heang
element with any object. Do not touch the internal workings of the lamp. Do not aempt to make any
repairs yourself.
DO NOT operate this device if the power cord or plug is damaged. If it is not working properly, or has
been damaged, call your nearest authorized service center.
DO NOT pull or carry this device by the power cord. Keep the power cord away from hot or wet
Store lamp in dry environment- avoid excessive moisture.
This heater is not intended for use in bathrooms, laundry areas and similar indoor locaons. NEVER
locate heater where it may fall into a bathtub or other water container. To protect against electrical
hazards, DO NOT immerse in water or other liquids.
SAFETY INFORMATION SAFETY INFORMATION
1 2
SAVE THESE WARNINGS
DO NOT touch the control panel or plug with a wet hand.
DO NOT run cord under carpeng. DO NOT cover cord with throw rugs, runners or similar coverings.
Arrange cord away from trac area and where it will not be tripped over.
DO NOT insert or allow foreign objects to enter any venlaon or exhaust opening as this may cause
an electric shock or re, or damage the heater.
To prevent a possible re, DO NOT block the air intakes or exhaust in any manner. DO NOT use on so
surfaces, like a bed, where openings may become blocked.
A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint,
explosive and/or ammable liquids are used or stored. Keep unit away from heated surfaces and open
ames.
Avoid the use of an extension cord because the extension cord may overheat and cause a risk of re.
To avoid re or shock hazard, plug the unit directly into a 110-120V electrical socket outlet.
ALWAYS place the heater on a at, level surface. This heater should only be hung from a ceiling.
WARNING: To reduce the risk of re or electric shock, DO NOT use this unit with any solid-state speed
control device.
DO NOT aempt to repair or adjust any electrical or mechanical funcons on this unit. Doing so will
void your warranty. The inside of the unit contains no user serviceable parts. Qualied personnel
should perform all servicing only.
Connect to properly grounded outlets only.
WARNING: This heater is not equipped with a device to control the room temperature. Do not use this
heater in small rooms when they are occupied by persons not capable of leaving the room on their
own, unless constant supervision is provided.
The heater must not be located in front of a socket outlet.
• These appliances must be earthed.
• Before installing or replacing the bulb, the appliance must be always being disconnected from the 110-
120V supply.
• The appliance must be disconnected from the 110-120V supply before the lid is opened.
• The appliance mist be installed exclusively in perfect horizontal posion
INSTALLATION INFORMATION
3 4
When xing the heater to a wall, ensure hinges are in the underside so that the lid hands down in the
open posion.
Minimum required distances:
• 10 inches from the side wall
• 20 inches from the ceiling
• Installaon height above 6
• The heater must be xed to a wall with the bracket supplied to allow adequate venlaon.
• Never x or place heater near ammable or combusble materials.
• Generally heaters must be placed at a safe distance (clear space) of at least 2.0m from combusble
materials and glass walls. If installed in workshops or garages where inammable or combusble paints
are used, the heaters must be installed at a distance of at least 4.0m from the source of danger.
If the heaters are placed in areas where spray painng of any descripon is taking place, they should
not be used during the painng operaons.
• Never use the heater in parcularly dusty and explosive areas.
ACCESSORIES
OPERATION
3 4
Step 1: Lock the bracket by M3x6 screw and
M3x6 screw.
Step 2: Fix the heater with the bracket that
provided by using the 4pcs of M6*10mm
Screws and knobs ghtly.
Step 3: Fix the bracket on the wall by using the
4PCS M6*50mm screws that provided ghtly.
Step 4: This unit is only suitable for wall
mounng use, Forbidden to mount on the
roof.
Only use the halogen heater on a rm solid vercal wall where the Mounng Bar is in contact with
the wall.
1. Mount the heater outside or in a large open area and well away from any obstrucons such as
branches or where the heater is near any objects that can be aected by heat, such as furniture, curtains
or other inammable objects (minimum distance 3 feet meter).
2. Do not use near bath tubs, wash areas or swimming pools.
3. Do not use in unvenlated areas.
4. Do not use where gas, petrol, paint or other inammable goods are stored.
5. Do not push any items through, obstruct or cover the grill of the heater head.
6. Do not posion immediately above or below an electrical socket.
7. Do not move when connected to an electrical supply and always wait for the pao heater to cool
down before storing away.
8. Do not touch the heater head when in use.
9. Do not leave turned on and unaended especially when children and or animals are in the vicinity.
10. The indicaon of the dierent posions of switches shall be visible from a distance of 3Ft.
11. The Marking concerning covering shall be visible aer the heater has been installed. It shall not be
placed on the back of heaters.
MAINTENANCE / TROUBLESHOOTING
5
12. The unit must be placed with the clearance of 6 to the oor and 12in to the ceiling.
13. The unit must be correctly installed according to the instrucons. Make sure the head is at least 6
from the oor.
14. The unit must be securely placed on a vercal and at wall.
15. The unit is at high temperature during operaon. It keeps hot for a period aer shut down. Potenal
danger would occur when touching it during this period.
16. Don’t place the unit closed to curtain and/or other ammable objects. Otherwise there will be a
danger of catching re.
17. Don’t cover the unit with anything during operaon or a short me aer its shut down.
18. Don’t wrap the power supply cord on the unit.
19. The unit must be handled with care, and avoid vibraon or hing.
20. The unit must be securely grounded during operaon.
21. If the unit gets damaged, it must be repaired by professional electricians.
22. When the power supply cord is damaged, it must be replaced by authorized agent or other
professional to avoid danger.
23. The unit must not be posioned under a socket.
24. When assembling, keep clear from any board or ammable material.
25. The unit must be supervised by adults if its used by a child.
26. It is not safe to install the unit by a swimming pool, in a bathroom or shower area.
27. It is not safe to use on a building site, greenhouse, barn or stable where there’s ammable dust.
28. The head of the unit is at high temperature during operaon. Unplug the unit and wait ll it cools
before cleaning.
29. Don’t use this unit in place where causcity or volale air exists, i.e. dust, steam, gas, etc.
30. Don’t use this unit as a cloth drier or towel drier.
31. Don’t use this unit as a sauna heater.
32. Don’t use this unit as a room heater.
33. Don’t use this unit in place of animal propagang and rising.
34. Don’t immerse this unit into water for cleaning.
35. The unit should be plugged in a socket, which is easily visible and reachable.
36. Two Dark points may exist on the surface of the heang elements during the rst few minutes aer
it is turned on. This is normal, and will not aect the performance of the unit.
37. This appliance is not intended for use by persons (including children) with reduced physical. Sensory
or mental capabilies, or lack of experience and knowledge, unless they have been given supervision or
instrucon concerning use of the appliance by a person responsible for their safety.
38. Children should be supervised to ensure that they do not play with the appliance.
OPERATION
5
CARE AND MAINTENANCE
Connect the power cable to a 110-120V, supply that is located in a safe, dry area.
• The Pull-O Switch is used to control the power of the appliance.
Once the power is on, the Pressing Switch on the heater is used to control the two heat sengs. Press
one me for 1500W,press again is o.
The Remote control is also used to control the two heat sengs. Press one me for 1500W,press
again is o.
• Although the pao heater is shower proof, do not use when raining or in wet condions.
• Always disconnect the power cable from the electrical supply, when the pao heater is not in use.
Care and maintenance
When disconnected from the electrical supply, clean the outside of the pao heater with a damp
cloth. Never use corrosive or solvent cleaners or immerse in water.
• Any maintenance or repairs including replacing the halogen tube should only be carried out by a
qualied electrician or by a recommended service center.
Technical specicaon
• Power supply 110-120V, 50~60 Hz,
• Waage max 1500w
• Insulaon class I
OF NOTE
6
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT
PARTS THERETO.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
MADE IN CHINA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Barton 96965 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI