JasonL HQAB2148.W.WT.AB Operating instructions

Type
Operating instructions

This manual is also suitable for

ASSEMBLY INSTRUCTIONS
Horizon Quadro A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
Page 1 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Horizon Quadro A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
Table top x2
Leg Quadro A x4
Beam x2
Plastic bracket x8
A
B
C
D
Allen key x2I
M8x20MM CSK x4
M8x20MM Socket head x4
M6x20MM Socket head x8
M6x30MM Socket head x8
E
F
G
H
COMPONENTS
SCREWS
Page 2 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
C
D
E F G H
A
B
F
G
ASSEMBLY INSTRUCTIONS
Horizon Quadro A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
STEP 01
Using Allen Key provided, attach 2 plastic brackets per leg (D)
(as per picture above) using M6x20MM (G) Socket head screw.
Using Allen Key provided, attach M8x20MM Socket head (F)-
screw socket half way into leg for all legs (B).
STEP 02
Page 3 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Horizon Quadro A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
STEP 03
Adjust extendable beam (C) to desired
length using markers and secure beam
at that length using screws provided
Page 4 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
ASSEMBLY INSTRUCTIONS
Horizon Quadro A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
Attach beam (C) to legs (B) using nut insert in legs.
See point attached
Frame looks like this. Using Allen Key, attach beam (C) with Socket (E)
Page 5 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 05
STEP 04
TOP VIEW
E
E
ASSEMBLY INSTRUCTIONS
Horizon Quadro A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
STEP 06
Page 6 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place desktops ontop of frame - with cutout at the back of the
desk. Nut inserts in top will align with plastic joiner brackets
using M6x30MM (H) sockets attached tops to frame.
H
TABLE TOP
BOTTOM VIEW
nut insertnut insert
nut insertnut insert
ASSEMBLY INSTRUCTIONS
Horizon Quadro A
2P workstation
Sizes: 1200x800, 1400x800, 1600x800, 1800x800 mm
STEP 07
Page 7 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Under the desktops, use l-shaped panel brackets to secure
the screens to the desktops. Place two brackets in each
screen (4 L-Shaped bracket in total).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

JasonL HQAB2148.W.WT.AB Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI