Xvision VIS450R Start Manual

Brand: Xvision

Model: VIS450R

Category: Security cameras

Type: Start Manual

This manual is also suitable for

VIS430R

CCTV

Model: VIS430R

Colour 30 metre IR Long

Range Camera

Model: VIS450R

Colour 50 metre IR Long

Range Camera

CCTV

Model:

VIS430R/450R

Colour 30/50 metre IR Long

Range Cameras

Manufactured exclusively for:

Xvision (Europe) Group,

Head Office: London, U.K.

Email: [email protected].uk

Web: www.x-vision.co.uk

TECHNICAL SUPPORT:

For Technical Support for any Xvision product please contact your local

distributor.

LIMITED WARRANTY:

This product is supplied with a 2 Year warranty.The Warranty excludes

products that have been misused, (including accidental damage) and

damage caused by normal wear and tear. In the unlikely event that you

encounter a problem with this product, it should be returned to the

place of purchase.

Before you begin

•Please unpack the box carefully and identify that all the parts are present.

•Do not cut the camera cables, this will void the warranty.

• Make sure you use only the recommended power supply. Damage caused to the camera by

incorrect voltage or wiring is not covered by the warranty.

The camera is suitable for indoor or outdoor use. Please bear in mind the following points when

choosing a mounting position.

•The camera must be positioned so that it will not point directly into the sun (sunrise and

sunset) or any bright light, as this may cause damage to the camera.

•Avoid viewing areas where half the area is in bright sunlight and the other half is dark,

such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with

such a large lux level variation.

Specification

Model: VIS430R/VIS450R

Picture Type: Day/Night (B/W & Colour)

Image Sensor: Sony 1/3” Super HAD CCD

DSP: Xvision IXC1DN

Resolution: 480TVL

Lens Viewing Angle: 43° (VIS430R)

35° (VIS450R)

Infra Red Nightvision: 30 metres (VIS430R)

50 metres (VIS450R)

Minimum Illumination: 0.1 Lux

Audio: No

Operating Voltage: 12V DC 1500mA

Suggested Power Supply: 12V DC 3500mA Regulated

Mounting: Wall

Weatherproofing: Yes

Dimensions:

Ø104.7x182.5mm

1. Contents

ITEM NAME OF PART QTY

1 Instruction Manual 1

2 Long Range IR Camera 1

3 Camera Bracket 1 1

4 Camera Bracket 2 1

5 Accessories Bag containing A, B, C 1

A Fixing screws for Bracket 1 & Camera Body 4

B Hex head bolt for fixing Bracket 1 & 2 1

C L-wrench 1

In the mounting bracket box contained within the main camera box

you will find the following items:

ITEM NAME OF PART QTY

6 Wall Mount Bracket 1

7 Accessories Bag containing D, E, F 1

D Fixing screws 4

E Wall Plugs 4

F Mounting Bolts 2

Dual mode Very High Resolution CCD sensor provides very good quality

Colour images in low light conditions of 0.1 lux or above and B/W

images in low light conditions below 0.1 lux and in complete darkness

Integrated Long Life Infra Red LEDs turn on automatically when the

camera switches to B/W mode and provides 30 to 50 metres night

vision

Light emitted from the Infra Red LEDS is not visible to the human eye,

however to the camera the light is clearly visible

Traditional styling makes them ideal for use in situations where an

instant deterrent or heavy duty camera is required

Sony 1/3" Super HAD CCD image sensor for 480 TVL resolution images

and 0.1 lux low light sensitivity

Xvision IXC1DN Digital Signal Processing (DSP) chip which has been

optimised for internal or external viewing and features Auto Gain

Control, Auto Electronic Iris,Auto White Balance, Back Light

Compensation, Low Smear, Edge Enhancement, Zero Colour Rolling and

Day/Night

3. Features

The VIS430R/VIS450R Colour Long Range IR cameras are designed for

medium to high risk applications. Their traditional styling makes them

ideal for use in situations where an instant deterrent or heavy duty

camera is required and they offer high resolution 480 TVL images from

their Sony 1/3" Super HAD CCD sensors and will provide images in

complete darkness up to 30 to 50 metres (depending on model) and

beyond 30 to 50 metres in light levels above 0.1 lux. The cameras can

be used externally and can be wall mounted, they also feature an

integrated sun/rain shield.

2. Product Description

STEP 4: The horizontal and vertical angles can be adjusted by loosening

(as shown in Figure 4).

Figure 4

STEP 3: Secure Bracket 1 and the camera onto Bracket 2 using the screws

(as shown in Figure 3).

Figure 3

STEP 1: Place Bracket 2 onto the desired ceiling or wall and fix using four

screws (as shown in Figure 1).

STEP 2: Alternatively you can attach Bracket 2 to the Mounting Bracket

supplied (as shown in Figure 2).

4. Installation & Operation

Figure 1

Figure 2

The VIS430R features a 6.0mm focus free lens for a 43° viewing angle

and up to 30 metres night vision and the VIS450R features an 8.0mm

lens for a 35° viewing angle and up to 50 metres night vision

Durable Corrosion Proof Metal Casing

Designed for External use and Wall mounting with the bracket supplied

Integrated sun/rain shield

Xvision VIS450R Start Manual

Brand: Xvision

Model: VIS450R

Category: Security cameras

Type: Start Manual

This manual is also suitable for

VIS430R

Download PDF

report

Xvision VIS450R Start Manual

This manual is also suitable for

Xvision VIS450R Start Manual

Related papers

Other documents