Hyundai H-CDM8016 User manual

Brand: Hyundai

Model: H-CDM8016

Category: Car media receivers

Type: User manual

Hyundai H-CDM8016 CD/MP3/USB receiver lets you enjoy your favorite music on the go. With its built-in CD/MP3 player, you can listen to your favorite albums and songs. You can also connect your USB drive or SD/MMC card to play your digital music files. The receiver also features a built-in AM/FM tuner with 18 preset stations, so you can easily find your favorite radio stations.

H-CDM8016

CD/MP3/USB RECEIVER CD/MP3/USB-

Instruction manual 

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting,

operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents

Table of contents..........................................................................................................................................................................2

Important safeguards....................................................................................................................................................................3

Accessories..................................................................................................................................................................................4

Installation/connection.................................................................................................................................................................5

Panel controls ............................................................................................................................................................................10

LCD layout................................................................................................................................................................................14

General operations.....................................................................................................................................................................15

Digital tuner operations..............................................................................................................................................................18

CD/SD/MMC/USB operations...................................................................................................................................................20

MP3/WMA overview.................................................................................................................................................................24

Handling discs...........................................................................................................................................................................26

Cleaning ....................................................................................................................................................................................26

Troubleshooting guide ...............................................................................................................................................................27

Specification..............................................................................................................................................................................29

Important safeguards

 Read carefully through this manual to familiarize yourself with this high-quality sound system.

 The beginning of operation is the moment of the unit installation. Before use the device in winter it is recommended to heat

up the passenger compartment during 20 seconds or to the operation temperature.

 Use the unit with the temperature that goes beyond the operation temperature greatly decreases the operation resource of the

screen and other components of device and can result an outage.

 Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.

 When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage rating

may cause serious damage to the unit.

 Do not attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.

 Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create safety hazards

such as electrical shock or laser beam exposure.

 Do not use the unit in places where it can be exposed to water, moisture and dust.

 Do not open covers and do not repair yourself. Consult the dealer or an experienced technician for help.

 Make sure you disconnect the power supply and aerial if you will not be using the system for a long period or during a

thunderstorm.

 Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an unusual sound,

has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the system.

 The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please confirm it before

installation.

 Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or burn out

the power amplifier.

Accessories

Receiver 1 pc

Front panel 1 pc

Front panel case 1 pc

Remote controller 1 pc

ISO cable 1 pc

USB adapter cable 1 pc

Mounting parts:

Screw M4X5 4 pcs

Screw M5X5 4 pcs

Screw ST5X25 1 pc

Nut M5 1 pc

Washer 2pcs

Mounting strap 1 pc

Release key 2 pcs

Customer information 1 pc

Warranty card 1 pc

Instruction manual 1 pc

Installation/connection

 Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

 Before finally installing the unit, connect the wiring and make sure that the unit works properly.

 Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

 Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an

emergency stop.

 If installation angle exceeds 30° from horizontal, the unit may not perform properly.

 Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from

the heater, or where it would be subject to dust, dirt or excessive vibration.

Din Front/Rear-Mount

This unit can be properly installed either from 'Front' (conventional DIN Front-mount) or 'Rear' (DIN Rear-mount installation,

utilizing threaded screw Holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.

DIN FRONT-MOUNT (Method A)

1. Car dashboard

2. Sleeve

3. Screw

4. Nut (5 mm)

5. Spring washer

6. Screw (5  25 mm)

7. Metal strap

8. Flat washer

1. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are

no obstacles (wires, dashboard elements, etc) for the unit installation.

2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard

to fix the sleeve in place.

3. Use the metal strap to fix the rear side of the unit. Determine a place for fixing and install

the strap as shown in the picture. You can bend the strap to the needed angle with your

hands.

4. Make the necessary wire connections. Ensure the connections are correct.

5. Install the unit into the sleeve until the side locks are fixed.

Dismantling the unit

 – Trim frame

b – Frame uninstall direction

c – Release key insertion

1. Switch off the unit and detach the front panel.

2. Insert your fingers into the groove in the front side of the trim frame (apply some

effort to detach the frame). Pull the frame to detach it.

3. Insert the supplied release keys into the both sides of the unit body to click, as shown

in the picture. To extract the unit from the dashboard, pull the release keys or the unit

body to pull it out. Before detaching the unit, ensure it is not fixed with the metal

strap.

Trim frame installation

To install the trim frame, press it to the unit body and push it to fix it in place. This should be done before installing the front

panel; otherwise you are not able to install the trim frame. When the trim frame being installed, the side with the groove should

face down and fixed first.

2. DIN REAR-MOUNT (Method B)

For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory radio mounting

brackets.

1. Select a position in which the screw holes of the brackets (3) are aligned with the screw

holes in the unit body, and screw in two screws (2) in each side.

2. Screw.

3. Factory radio mounting brackets.

4. Vehicle dashboard.

5. Lock (remove this part).

Note: The outer trim frame and mounting sleeve are not used for method of installation.

Installing the front panel

Insert the left side of the panel then, and insert the right side. Close the panel.

Press OPEN button to detach the panel. When the front panel is in horizontal position hold and slide the panel to left and then

pull it out.

OPEN

Anti-theft system

The front panel of this unit can be stored in the included protective case when not in used and carried away

when you leave the vehicle to deter theft. To open the protective case, take it with both hands and twist as

shown in the picture.

Remove the panel

1. Press POWER button to switch off the power of the unit.

2. Press OPEN button to flip down the panel. When the front panel is in horizontal position hold and slide

the panel to left and then pull it out.

3. Put it to the protective case and take it with you.

Electrical connections

Panel controls

Front panel

1. OPEN button

2. DISP button

3. VOL knob/SEL button

4. MUTE button

5. RC sensor

6. SCN button

7. AUX IN jack

8. BAND button

9. PREVIOUS button

10. AF button

11. TA button

12. NEXT button

13. POWER button

14. PTY button

15. MODE button

16. AMS button

17. PLAY/PAUSE/Preset button 1

18. INT/Preset button 2

19. RPT/Preset button 3

20. RDM/Preset button 4

21. –10/preset button 5

22. +10/preset button 6

23. Mini USB jack

Inner panel

24. EJECT button

25. Flashing LED

26. CD slot

27. RESET button

28. SD/MMC Slot

Remote control

1. POWER button

2. MUTE button

3. AMS button

4. DISP button

5. BAND button

6. MODE button

7. TOP/PLAY/PAUSE/Preset button 1

8. INT/Preset button 2

9. RDM/Preset button 4

10. VOL+ button

11. SEL button

12. PREVIOUS/NEXT buttons

13. AF button

14. VOL- button

15. TA button

16. PTY button

17. SCN button

18. RPT/Preset button 3

19. +10/preset button 6

20. –10/preset button 5

Changing the battery

1. Pull out the battery tray. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+)

mark facing upward.

2. Insert the battery tray into the remote control.

Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor

immediately.

Do not recharge, short, disassemble or heat the battery or dispose it in a fire.

Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give off heat,

crack or start a fire.

When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat, crack or start a

fire.

LCD layout

1. Track play indicator

2. Album name ON

3. Artist name ON

4. Song name ON

5. Loud function indicator

6. Stereo reception indicator

7. AF function indicator

8. TP function indicator

9. TA function indicator

10. EON function indicator

11. MP3 file being played

12. Intro playback indicator

13. PTY function indicator

14. Random playback indicator

15. Mute function indicator

16. Repeat playback indicator

17. Local reception indicator 23. Track second time display/radio frequency

18. DSP (equalizer) mode indicator 24. Disc number display

19. Subwoofer indicator (not active) 25. Folder name ON

20. Stereo signal indicator 26. File name ON

21. Track number display/current band 27. USB/Memory card indicator

22. Track minute time display/radio frequency 28. On: disc being played/Flashing: disc pause

General operations

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press OPEN button on the panel to

detach the panel take it off and press the RESET button with thin hard object to restore the unit to the original factory settings.

Power ON/OFF

Press any button to turn the unit on. Press and hold POWER button to turn off the unit.

Note: After the unit is off, radio current settings will be memorized, and when you turn the unit on it will resume the stored

status, which you set.

Display (DISP)

Press DISP button to switch between display information such as radio frequencies, clock, track and other information depending

on the playing MODE.

To adjust the time:

 Press DISP button until clock is showed, press the DISP button and hold for 2 seconds. Time will start blinking.

 Rotate VOL knob clockwise to adjust hours.

 Rotate VOL knob anticlockwise to adjust minutes.

 Press DISP button again to save setting.

Mode

By pressing this button, user can select: AUX/TUNER/S-CDP(CD-MP3) (active if a CD is inside)/USB (active if a USB is

connected)/MMC/SD (active if a memory card is inside).

Mute

Press this button to mute the sound at once. Press again to return to the previous volume level.

Volume control/select

Rotating VOL knob, you can adjust VOL/BASS/TRE/BAL/FAD. To select the functions, press SEL button shortly until the

desired functions are shown on the display. Increase or decrease the volume by turn VOL knob right or left. These buttons can be

used to adjust the BASS, TREBLE, BALANCE and FADER.

Note: Bass and treble adjustment is not available when DSP (equalizer) is on.

Other functions

To choose the corresponding mode, press and hold SEL knob for 2 seconds, and then press it repeatedly until the display shows

the mode. Rotate VOL knob to choose the needed value. After choosing, please leave the unit idle to activate.

TA SEEK/TA ALARM

In TA SEEK mode, the unit will seek for traffic announcement program when TA is pressed; in TA ALARM mode the alarm is

set off.

MASK DPI/MASK ALL

During MASK DPI mode, the unit will mask only the AF which has different PI, this is the default mode; during MASK ALL

mode, the unit will mask the AF which has different PI and no RDS signal with high field strength.

RETUNE S/L - SHORT/LONG

“RETUNE” refers to the time period the unit allows for radio scan when reception is interrupted. “S” represents a time period of

30 seconds and “L” represents a time period of 90 seconds.

AUDIO DSP CONTROLS

Choose equalizer mode: POP M => ROCK M => CLASS M=> FLAT M =>DSP OFF.

LOUDNESS CONTROLS

Select LOUD ON or OFF. In ON mode the bass and treble response will be boosted. Recommended to activate when listening at

a low volume level.

ESP (Electronic Shock Protection) MODE

Choose the value for CD disc (45 sec. for Audio-CD, 120 sec for MP3, 300 sec for WMA).

BEEP MODE

BEEP ON: BEEP sound can be heard from speaker when the buttons are pressed.

SEEK MODE (for radio mode)

SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped when station is detected even user still push SEEK

button.

SEEK 2: Auto SEEK SCAN is not stopped even if station is detected if user pushes SEEK button. When releases SEEK button,

then stop when station is detected.

STEREO/MONO (for radio mode)

When FM stations are weak and are disturbed, listening can be improved by selecting MONO.

LOCAL/DX (for radio mode)

“Local” position in areas with strong signals to let radio stop at only strong stations during manual tuning (LOC appears). Select

Distant position in areas with weak signals to listen to all stations.

VOL LAST/ADJUST

This function allows to set the volume level of the unit after it was turned off and then turned on again. Choose VOL LAST if

you want the volume level to be the same as it was before turning off. VOL ADJUST allows to choose volume level.

AUX mode

This unit has an AUX in jack enabling connection of external devices as signal sources.

Note: Do not flip down the front panel while using the AUX in jack.

Digital tuner operations

Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you

area, the following service is not available, either.

MODE

Press MODE button to turn on tuner mode.

BAND

Press BAND button. Each band is toggled cyclically by pressing this key FM1--FM2--FM3 --MW1 (AM1)--MW2 (AM2).

AUTOMATIC OR MANUAL TUNING

Press and hold NEXT button to start automatic search of programs upwards; press and hold PREVIOUS button to start automatic

search downwards. Press the buttons repeatedly for manual search of programs.

Note: The unit will scan the frequency range, making stop on each available station for 5 second if you press SCN button.

AUTO SEEK SEARCH TUNING (AMS)

By pressing shortly AMS button, the radio searches for each preset station. By pressing longer than 1 sec, and then 6 strongest

stations are preset to the corresponding preset number. When AS operation is finished, the radio executes the preset scan.

SCAN AUTOMATIC TUNING CONTROL (SCN)

This button is operated as RADIO SCAN. The operation is similar as normal search but different thing is holding 5 seconds on

every station detected in RADIO SCAN mode.

TA (TRAFFIC ALARM) FUNCTION

 Briefly press the TA button to turn on or turn off the TA function.

 When TA is enabled (on), the tuner starts searching the traffic announcement.

AF (ALTERNATIVE FREQUENCIES) FUNCTION

Briefly press the AF button to turn on or turn off the AF function.

The RDS program will be automatically searched and received. The unit will search another frequency with this RDS program.

PTY (PROGRAM TYPE) FUNCTION

When PTY is selected, the radio starts to search corresponding PTY information and stops when the corresponding PTY

information is detected. If corresponding PTY information is not found, NO PTY is displayed.

Press PTY button once to choose Music mode, then press number buttons (1-6) to choose the needed program.

Press PTY button twice to choose Speech mode, then press number buttons (1-6) to choose the needed program.

MUSIC SPEECH

Note: When pressed shortly, number buttons select a preset station directly. When pressed longer than 1 sec., current station is

stored in preset memory bank.

NEWS, AFFAIRS, INFO

SPORT, EDUCATE, DRAMA

CULTURE, SCIENCE, VARIED

WEATHER, FINANCE, CHILDREN

SOCIAL, RELIGION, PHONE IN

TRAVEL, LEISURE, DOCUMENT

1. POPM, ROCK M

2. EASY M, LIGHT M

3. CLASSICS, OTHER M

4. JAZZ, COUNTRY

5. NATION M, OLDIES

6. FOLK M

CD/SD/MMC/USB operations

Discs for playback

This unit can play disc types: CD/CD-R/-RW.

Compatible with formats: CDDA/MP3/WMA.

Loading and ejecting a disc

1. Turn the power on.

2. Press OPEN button

3. Insert the disc with the printed side facing upward into the slot.

4. Press EJECT button to eject the disc.

Multi-media card MMC/SD card slot

Support MP3/WMA ID3 format music only. Press OPEN button. Carefully insert the SD/MMC card into the card slot on the

inner panel. Close the panel. Unit starts playback automatically.

USB jack

Carefully connect the USB driver to the USB adapter cable and then insert it into the USB jack on the front panel. Unit starts

playback automatically.

Note: Do not flip down the front panel during playback of USB files.

USB/SD/MMC notes:

USB functions (flash memory type) MP3 music play.

1. SD/ MMC card support.

2. FAT 12/ FAT 16/ FAT 32 is possible

- FAT 12/16 (dir: 200 support, file:500 support),

Page is loading ...

Hyundai H-CDM8016 User manual

Brand: Hyundai

Model: H-CDM8016

Category: Car media receivers

Type: User manual

Download PDF

report

Hyundai H-CDM8016 User manual

Hyundai H-CDM8016 User manual

Related papers

Other documents