RCA Mobile DVD Player User manual

Brand: RCA

Model: Mobile DVD Player

Category: Portable DVD/Blu-Ray players

Type: User manual

This manual is also suitable for

NULL

Mobile DVD Player

User's Guide

Changing Entertainment. Again.

Important Information

Product Registration

Please fill out the product registration card (packed separately) and return it immediately. Returning this card allows us to

contact you if needed.

Product Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial

and model numbers in case you need them. The numbers are located on the product.

Model No. ____________________ Serial No. ____________________ Purchase Date: ________________________

Dealer/Address/Phone: ______________________________________________________________________________

CAUTION

THIS PRODUCT UTILIZES A

LASER. USE OF CONTROLS OR

ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN

HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN

COVERS AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO

QUALIFIED PERSONNEL.

CLASS 1

LASER

PRODUCT

This symbol indicates "dangerous

voltage" inside the product that

presents a risk of electric shock or

personal injury.

WARNING

To reduce the risk of fire or

electric shock, do not expose this

product to rain or moisture. No

objects filled with liquids, such as

vases, shall be placed on the

apparatus.

This symbol indicates

important instructions

accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Caution: To prevent electric shock, match wide blade of plug to wide slot,

fully insert.

Attention: Pour éviter les chocs électriques, introduire la lame la plus

large de la fiche dans la borne correspondante de la prise et pousser jusqú

au fond.

Refer to the identification/rating label located on the back panel of your product for its proper

operating voltage.

FCC Regulations state that unauthorized changes or modifications to this equipment may void the

user’s authority to operate it.

Note:

This DVD player is designed and manufactured to respond to the Region

Management Information. If the Region number of a DVD disc does not

correspond to the Region number of this DVD player, this DVD player cannot play

the disc. The Region number for this DVD player is Region No 1.

This symbol indicates that this product

incorporates double insulation between

hazardous mains voltage and user

accessible parts. When servicing use only

identical replacement parts.

Important Information

Important Information 1

FCC Statement: This equipment has been tested and found to comply with the limits of a Class B device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Industry Canada Statement: This Class B digital apparatus meets all requirements of the Canadian Interference--

Causing Equipment Regulations.

Parts Packed With This Product

AC Power Cord- Part number 256516

DC Power Cord- Part number 221328

Remote Control- Part number 257191

If you are missing or have lost any of these parts please call 1-800-338-0376.

Important Information

2 Important Information

IMPORTANT SAFETY NOTE:

WHEN YOU SECURE THE PLAYER IN THE CAR YOU MUST STRAP IN THE PLAYER WITH THE LAP

BELT IN THE REAR SEAT. DO NOT USE EITHER SIDE SEAT BELT TO SECURE THE PLAYER. MAKE

SURE THE BELT IS AS TIGHT AS POSSIBLE, AS THE PLAYER COULD MOVE IF THE CAR MAKES

ABRUPT STOPS AND/OR STARTS. YOU COULD ENDANGER THE LIVES OF OTHER PASSENGERS IF

THE PLAYER IS NOT PROPERLY SECURED.

Things to Consider Before You Connect

Before looking at the specifics of the mobile DVD player, please take a moment to review the following

precautions:

• When in a car, the mobile DVD player must be powered from the DC POWER (CAR) jack on the back

panel. The mobile DVD player’s power should only be turned on when the car’s ignition is turned on.

Note: To prevent the car’s battery from discharging, disconnect the DC power cord from the cigarette lighter

socket when not in use.

• Use only the approved power cord supplied with your mobile DVD player. Always disconnect the

power cord from the lighter socket or wall outlet before disconnecting it from the player.

Chapter 1: Connections & Setup

Chapter 1 3

Installing the Player in the Car

1. Rest the player in the center of the rear seat.

2. Insert the center seat’s (lap) safety belt through the player’s retainer holes.

Important Note: Secure the player with the lap seat belt as tight as possible so that the player does not

move around.

3. Fasten seat belt strap by inserting and passing it through the player’s two slot openings.

4. Plug the DC power cable into the DC POWER (CAR) jack on the back of the player. Attach the

other end of the cable to the car’s cigarette lighter socket.

Note: Make sure the car’s ignition is on before plugging the DC power cord into the cigarette lighter

socket.

5. Adjust the LCD screen for desired viewing.

6. If desired, connect headphones to either of the two headphone jacks on the back of the player.

Notes: When the player is not in use, the LCD screen should be closed firmly.

Do not place objects in the front storage compartment other than the supplied AC power cord or DC

power cord.

Using the Player in a Hotel, Office or Home

1. Place the bottom of the player carefully on a table or other resting surface.

2. Plug the AC power cable into the AC POWER (HOME) jack on the back of the player. Attach

the other end of the power cord to a standard wall outlet. Make sure to insert the blades of the

power cord fully into the wall outlet.

3. Adjust the LCD screen for desired viewing.

4. If desired, connect headphones to either of the two headphone jacks on the back of the player.

Chapter 1: Connections & Setup

4 Chapter 1

Connect to a TV

1. Connect audio cables (white and red) to the Audio Input Jacks on the back of the TV

(sometimes labeled AUDIO L/MONO and R) and to the AUDIO OUTPUT jacks (L AUDIO R) on

the DVD player.

2. Connect the video cable (yellow) to the Video Input Jack on the back of the TV and to the

VIDEO OUTPUT jack on the DVD player.

3. Connect the AC power cord to the AC POWER (HOME) jack on the DVD player and plug the

other end into the wall outlet.

PHONES PHONESEXTERNAL PANEL EJECT DC POWER (CAR) AC POWER (HOME)

TV (back panel)

CABLE/

ANTENNA

VIDEO

L / MONO

AUDIO

OUT

OUTPUT

INPUT

Chapter 1: Connections & Setup

Chapter 1 5

The Back of the Mobile DVD Player

Disc slot Insert discs into this slot.

PHONES Allows you to connect headphones to listen to the sound.

Note: When either or both of the headphones are in use, there will be no sound coming from the

speakers.

OUTPUT VIDEO Sends the video playing in the DVD player to another component such as a TV.

OUTPUT L/R AUDIO Sends the audio playing in the DVD player to another component such as

a TV or sends the sound to powered (amplified) speakers.

EXTERNAL PANEL Sends the audio and the video that’s playing in the DVD player to a

component that has a compatible 8-pin input jack, such as an external monitor.

Notes: For vehicle use, connect the mobile DVD player to a factory equipped compatible display. To

determine if the display is compatible, check the owner’s manual provided with your vehicle.

Damage can occur to the mobile DVD player if you do not use a compatible monitor with a compatible

8-pin input jack.

EJECT Ejects the disc from the disc slot.

PHONES PHONESEXTERNAL PANEL EJECT DC POWER (CAR) AC POWER (HOME)

OUTPUT

INPUT

Disc slot

Chapter 1: Connections & Setup

6 Chapter 1

DC POWER (CAR) Connect the DC power cord to this jack from the car’s cigarette lighter socket

to give the unit power.

AC POWER (HOME) Connect the AC power cord to this jack from an AC outlet to give the unit

power.

INPUT VIDEO Receives video from another component, such as a VCR, camcorder or an Internet

access device, so you can see it on the DVD player’s LCD screen.

INPUT L/R AUDIO Receives audio from another component, such as a VCR, camcorder or an

Internet access device, so you can hear what’s being played on the connected component.

PHONES Allows another person to connect headphones to listen to the sound.

PLAY • PAUSE

VOLUME

STOP

LCD

Screen

Storage

Compartment

Buttons and Controls on the Mobile DVD

Player

LCD Screen Video appears here (when watching a DVD disc).

Storage Compartment Open the lid to store the supplied power cords.

Buttons (listed alphabetically)

Arrow (up, down, left, right) buttons Use these buttons to access items on

the LCD screen.

DISC MENU Displays the disc menu. The content of the menu varies from

disc to disc.

DISPLAY Cycles through the display options by pressing repeatedly:

brightness, contrast, color, sharpness or tint. The level can then be adjusted by

using the volume up or down button.

DVD SETUP Displays the DVD player’s setup menu.

EJECT Ejects the disc from the disc slot.

Chapter 1: Connections & Setup

Chapter 1 7

NEXT ( ) Advances to the next chapter on a DVD disc, track on a CD or song on an MP3.

OK When a menu is on the screen, selects the item that is highlighted.

PLAY/PAUSE ( ) Switches between play and pause when you’re playing a disc.

POWER Turns the DVD player on or off.

PREV ( ) Goes back to the previous chapter on a DVD disc, track on a CD or song on an

MP3.

SCREEN MODE Selects 16:9 or 4:3 screen mode.

STATUS Displays current disc information while the disc is playing.

STOP ( ) Stops disc play.

SURROUND Changes the Surround Sound options by pressing repeatedly: Surround Sound, 3D

Surround Sound, Hall Surround Sound and Surround Off.

VOLUME up and down buttons Increases or decreases the sound from the built-in speakers.

Put Batteries in the Remote

1. Remove the battery compartment cover on the remote.

2. Insert two new AAA batteries. Match the polarities (+ and -) on the batteries with the diagram

on the remote.

3. Put the battery compartment cover back on the remote.

Chapter 1: Connections & Setup

8 Chapter 1

The Remote Control (buttons listed in alphabetical order)

0-9 and +10 (Number buttons) Enters titles, tracks or chapters. To enter a

number above 9, for example 12, press +10 and then 2.

Arrow (up, down, left, right) buttons Use these buttons to access items on

the LCD screen.

A-B Sets the beginning and end of the section you want to repeat. Go to

page 14 for more information.

ANGLE Displays and selects the camera angles. Each time you press the

button, the angle changes. The number of angles varies from disc to disc.

AUDIO Displays the Audio language and channel.

DISC MENU Displays the disc menu. The content of the menu varies from

disc to disc. Go to page 11 for more information.

DISPLAY Cycles through the display options by pressing repeatedly:

brightness, contrast, color, sharpness or tint. The level can then be adjusted by

using the volume up or down button.

DVD POWER Turns on and off the unit.

DVD SETUP Displays the setup menu. Go to page 21 for more information.

EJECT Ejects the disc from the disc slot.

ENTER When a menu is on the screen, selects the item that is highlighted.

EQ Changes the equalizer options by pressing repeatedly: EQ TYPE, displays

the frequency levels, EQ ON, EQ OFF. Go to page 14 for more information.

Fast Forward ( ) Scans forward on a disc.

Fast Reverse ( ) Scans backward on a disc.

MUTE Lowers the volume to its minimum level. Press again to restore

volume.

DVD

POWER

SURROUND

EJECT

STATUS

ANGLE

SUBTITLE

AUDIO

+10

ZOOM

DISC

RETURN

A-B

REPEAT

DVD

SETUP

MUTE

VOLUME

DISPLAYSLOW

SLOW STOP PLAY/ PAUSE

ENTER

Chapter 1: Connections & Setup

Chapter 1 9

Next ( ) Advances to the next chapter on a DVD disc, track on a CD or song on an MP3.

PLAY/PAUSE ( ) Switches between play and pause when you’re playing a disc.

Previous ( ) Goes back to the previous chapter on a DVD disc, track on a CD or song on an

MP3.

REPEAT Changes the REPEAT options by pressing repeatedly. The options vary depending if you

are playing a DVD, CD or an MP3. Go to the repeat feature explanation for each disc.

RETURN Returns you to the previous screen.

SLOW ( ) Plays a disc in slow, forward motion.

SLOW( ) Plays a disc in slow, reverse motion.

STATUS Displays current disc information while the disc is playing.

STOP ( ) Stops disc play.

SUBTITLE Displays the subtitle language of the DVD disc (if the disc was created with subtitles).

Each time you press the button, the subtitle language changes.

SURROUND Changes the Surround Sound options by pressing repeatedly: Surround Sound, 3D

Surround Sound, Hall Surround Sound and Surround Off.

VOLUME up and down buttons Increases or decreases the volume.

ZOOM Zooms in on the DVD disc by pressing repeatedly: x1.5, x2, x4.

DVD Basics

Regional Coding

Both the DVD player and the discs are coded by region. These regional codes must match in order

for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 1. Discs

with other regional codes can’t be played in this unit.

Chapter 1: Connections & Setup

10 Chapter 1

Using Different Menus

Each disc is programmed with different features. There are two separate menu paths that you can

use to access features: the disc’s menu and the DVD’s status banner. Remember that a feature only

works if the disc was programmed with that feature. For example, if you choose subtitles, the

subtitles only appear if the disc was created with subtitles.

• The Disc menu – The disc menu is part of each disc and is separate from the DVD’s status

banner. The contents of each disc’s menu vary according to how the disc was created and what

features are included. The disc menu is turned on when a disc is inserted or you press the

DISC MENU button.

• The DVD’s status banner – The status banner appears across the top of the screen when a

disc is playing. It can only be accessed while you are playing a disc. It’s turned on and off with

the STATUS button on the remote.

This is an example of a one-

sided disc.

(

)

This is an example of a 2-sided

disc. The title is in the center.

Types of Discs Your DVD Will Play

• DVD discs – Contain video.

• Audio discs – Contain musical or sound content only.

• MP3 discs – Contain audio files (for example, a CD-R with downloaded

MP3 files).

Loading and Playing Discs

Before you load a disc, make sure that it is compatible with the player. Note

that the following discs CANNOT be used with this player:

• Laserdisc

• CD-I, CD-ROM, DVD-ROM

• MiniDisc

• CD-G discs play audio only, not graphics

Chapter 1: Connections & Setup

Chapter 1 11

To Load and Play a Disc

1. Lift up the LCD screen and position it to your liking.

2. Press the POWER button to turn on the unit.

3. Place a disc gently into the disc slot with the disc’s label facing up (double-sided discs have

content on both sides, so you can place either side up).

The DVD player reads the disc’s table of contents, and then one of following happens depending

on how the disc was programmed:

• No disc menu appears.

• The disc menu appears.

• The disc menu appears on the screen when you press PLAY/PAUSE.

• The disc starts playing automatically.

When you stop playing a disc, the DVD player remembers where you stopped. When you start

playing the disc again, it picks up where you left off unless the disc is removed, power is turned

off, or the unit is unplugged.

Using a Disc Menu

A disc is capable of having an on-screen menu that is separate from the DVD’s on-screen status

banner. The disc menu might only contain a list of the titles and chapters, or it may allow you to

change features such as language and playback settings.

Although the content and operation of disc menus vary from disc to disc, the following example

will give you an idea of what to expect.

Chapter 1: Connections & Setup

12 Chapter 1

1. When the disc is first inserted and/or you press DISC MENU, the disc menu

appears.

This is an example of a disc menu. The

menus on discs vary because the disc

menu is created by the disc’s author.

In this example, English is highlighted.

Press ENTER on the remote to play the

disc with English dialog.

2. Press the up or down arrow button on the remote to highlight the section

of the disc menu you want to choose, and press ENTER. In the example on

the left, Language has been selected.

3. Press the up or down arrow button to select a language, and press ENTER.

4. Press PLAY/PAUSE to play the disc.

Chapter 2: Playing Discs

Chapter 2 13

Playback Features

Playback operations of DVDs and CDs vary among discs. Since this unit plays DVDs according to

the disc contents the software producers designed, some playback features may not be available.

Refer to the instructions packed with the DVDs for information.

Playback features aren’t usually available during the opening credits of a movie. If a playback

feature isn’t available, the invalid symbol (a hand icon) appears on the screen when you press a

button.

Fast Motion Playback (Picture Scan)

To scan quickly through the disc when you’re playing it, use the Picture Scan feature.

1. Press the Fast Reverse ( ) or Fast Forward ( ) button when you’re playing a disc.

2. Press the button again to scan at a faster speed. Each time you press the button, the scanning

speed increases--2, 4, 6, 8 times the normal speed.

Skipping Tracks or Songs

When a CD or MP3 disc is playing, use the Previous ( ) or Next ( ) button to skip a track

or song. Press to advance to the next track or song. Press to go to the previous track or

song.

Chapter 2: Playing Discs

14 Chapter 2

Using the A-B Repeat Feature

A-B Repeat lets you define a specific segment on the disc that you want to repeat. The A-B Repeat

feature works the same for all discs. For example, you might like to watch the dogfight in the

movie Top Gun. To watch this scene over and over:

1. Find the spot on the disc that is a few seconds before the beginning of the scene you want to

repeat.

2. Press the A-B button. This sets the A point (A TO B SET A appears).

3. When you get to the part of the disc that you want to be the end of the repeated segment (the

B point), press the A-B button again. This sets the end point (A TO B SET B appears). The

segment repeats until you turn Repeat off by pressing the A-B button again (A TO B OFF

appears).

Using the Equalizer

Access the equalizer by pressing the EQ button. The equalizer allows you to choose a specific

sound for a disc through the EQ TYPE option (the first screen that appears when you press EQ).

Press PLAY repeatedly to cycle through the settings which appear at the bottom of the EQ TYPE

screen (PERSONAL appears automatically when you access the EQ TYPE option). The other settings

are: FLAT, CLASSIC, JAZZ, ROCK, POPS, BALLAD, DANCE.

The PERSONAL equalizer setting allows you to adjust the decibels of each frequency (60 through

15K). Press the left or right arrow button to select the frequency you want to adjust. Then use the

up or down arrow button to adjust the decibel (the decibel changes on the right side of the EQ

TYPE screen).

Chapter 2: Playing Discs

Chapter 2 15

Playing DVDs

For basic information about loading and playing discs, go to page 9. Press the STATUS button on

the remote to display the Status Banner. The options below show you what happens when you

press the STATUS button.

Press STATUS 1x Current title, chapter and time appear.

Press STATUS 2x Current subtitle information appears.

Press STATUS 3x Current audio language and audio format appear.

Press STATUS 4x Current surround sound setting appears.

Press STATUS 5x Current angle setting appears.

Press STATUS 6x Current A-B repeat setting appears.

Press STATUS 7x Current repeat setting appears.

Press STATUS 8x Status Banner disappears.

Changing Surround Sound

You can use this feature to add a surround sound effect to the audio. While a disc is playing, press

SURROUND. Pressing SURROUND consecutively changes the surround sound options:

• SURROUND SOUND

• 3D SURROUND

• HALL SURROUND

• SURROUND OFF

As you toggle through the options, the surround sound changes at that time.

Chapter 2: Playing Discs

16 Chapter 2

Selecting a Chapter

Because DVD discs use digital technology, a title can be divided into individual chapters (similar to

tracks on a CD). You can skip to a specific chapter by using the Chapter feature in the Status

Banner.

1. While a disc is playing, press STATUS (the Status Banner appears).

2. Press the right arrow button to highlight the current chapter playing.

3. Press the up or down arrow button to go to the next or previous chapter. Then press OK to

select the chapter you want to play.

Note: The Chapter feature only works on discs formatted with separate chapters.

Tip

You can also advance

to the next chapter by

pressing NEXT, or go

to the preceding

chapter by pressing

PREV.

Changing the Audio Language

Use the AUDIO button to change the Audio Language setting for the current DVD disc. Also, the

audio format of the disc is displayed if it was recorded in a different audio format, such as Dolby

digital (5.1ch). Press AUDIO consecutively to toggle through the different audio formats and

languages. As you toggle through the options, the audio language and format change at that time.

Notes:

The audio feature only works if the disc was created with multiple languages.

Some discs allow you to change the audio format from the disc’s menu, if available.

Changing the Subtitle Language

Use the SUBTITLE button to change the subtitle language for the current DVD disc. Press SUBTITLE

consecutively to toggle through the subtitle options. As you toggle through the options, the subtitle

language changes at that time.

Note: The subtitle feature only works if the disc was created with multiple subtitles.

Chapter 2: Playing Discs

Chapter 2 17

Changing the Camera Angle

Some discs contain multiple angles of a particular scene or sequence. Press the ANGLE button to

toggle through the different angles. As you toggle through the options, the angle changes at that

time.

Note: The angle feature only works if the disc was created with multiple angles.

Using the Repeat Feature

The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat

options:

• CHAPTER REPEAT ON

• TITLE REPEAT ON

• REPEAT OFF

As you toggle through the options, the repeat option changes at that time. The chapter, for

example, repeats once that chapter has ended. The selected repeat option loops repeatedly until

you turn it off.

Chapter 2: Playing Discs

18 Chapter 2

Playing Audio CDs

For basic information about loading and playing discs, go to page 9. When playing an audio CD,

the Status Banner appears automatically. It displays the current track and the amount of time for

that track playing, the total amount of time on the disc and the current time running on the disc.

Press the STATUS button on the remote to display the Status Banner. The options below show you

what happens when you press the STATUS button.

Press STATUS 1x SINGLE ELAPSED appears along with the current track playing and the

time of that track.

Press STATUS 2x SINGLE REMAIN appears along with the current track playing and the

amount of time left of the track.

Press STATUS 3x TOTAL ELAPSED appears along with the current track playing and the

total time playing on the CD.

Press STATUS 4x TOTAL REMAIN appears along with the current track playing and the

amount of time left on the CD.

Press STATUS 5x Turns off the Status Banner.

Using the Repeat Feature

The default mode for the Repeat feature is OFF. Pressing REPEAT consecutively changes the repeat

options:

• REP-ONE – repeats the track that is playing

• REP-ALL – repeats the disc that is playing

• REPEAT OFF

As you toggle through the options, the repeat option changes at that time. The track, for example,

repeats once that track has ended. The selected repeat option loops repeatedly until you turn it off.

Page is loading ...

RCA Mobile DVD Player User manual

Brand: RCA

Model: Mobile DVD Player

Category: Portable DVD/Blu-Ray players

Type: User manual

This manual is also suitable for

NULL

Download PDF

report

RCA Mobile DVD Player User manual

This manual is also suitable for

RCA Mobile DVD Player User manual

Related papers

Other documents