Badabulle B014404 User manual

Brand: Badabulle

Model: B014404

Type: User manual

*Voir conditions page 15

Baby

Camera

Wi-Fi 3G

Baby Station

B014404

Notice d’utilisation

Instruction Manual

*Voir conditions page 11

Balancelle

Easy

Baby Station

9kg

Page is loading ...

*Voir conditions page 11

Balancelle

Easy

Baby Station

9kg

Thank you for purchasing our baby monitor. Your product was manufactured and tested in accordance

with the strictest quality controls to ensure that every system leaves the factory in perfect condition.

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

COMPOSITION

A- Wi-Fi camera

B- Mains power adapter

+ Bag of screws

1- Camera lens

2- Infrared sensor

3- Microphone

4- Antenna

5- Speaker (Talk Back function)

6- Pairing button

7- DC power jack connector

8- Start luminous indicator

9- ON/OFF switch

CONTROLS

*Voir conditions page 11

Balancelle

Easy

Baby Station

9kg

START

WARNING: check the security settings in your

smartphone, unknown sources should be accepted.

START WI-FI

1- Download the “See my Baby” application on the App Store

or on Google Play.

2- Connect the camera to the mains with the mains power

adapter (B).

3- Set the button located on the rear of the camera (6) to

“pairing”. A red light (8) appears, and then a green light

replaces it after a few seconds. This means that your

camera is ready to be associated with your Smartphone.

4- Take your Smartphone and go to “settings” and then

“Wi-Fi”. Select the Wi-Fi network emitted by the

“Badabulle-Cam” camera.

5- Enter the default password “12345678”.

6- Once the Wi-Fi network is connected, start the application

previously downloaded on your Smartphone; the camera

is automatically started.

START 3G

1- Go to

, put the password “12345678”.

2- Go to “Join Home AP”.

3- Select your Wi-Fi network as the router.

4- Enter your Wi-Fi password or the WEP key.

5- Press “Join”.

6- The message“The pairing of join WIFI AP is done; please

switch your camera to Station mode and re-power it.”

appears.

7- Press “OK”.

8- Set the button located on the rear of the camera to “link”;

a red light appears. Then restart the camera by pressing

the switch once (9). The LED indicator turns green when

your camera is connected to your WIFI network.

9- Exit and then return to the “See my Baby” application;

your camera is connected in the 3G mode.

You can now connect your camera wherever you are.

We highly recommend changing your password to secure

access to your camera. (Cf. Changing the password).

PLEASE NOTE: the video automatically disconnects

after five minutes to avoid unnecessarily draining your

smartphone battery. A notification message informs you

that the application has entered standby mode: “The video

session would be ended now”.

1 2

*Voir conditions page 11

Balancelle

Easy

Baby Station

9kg

This product is compatible with:

• Iphone (from Iphone 3GS)

• Ipad (from Ipad 2)

• Android (from version 2.2)

• Sony Xperia (from the MT 271)

• …and most makes of smartphone: Samsung, Nokia, etc.

CAMERA ON /OFF

• Press the

button when you want to start the video. (The

button changes to .)

• If you want to stop the camera function, press .

VOLUME

• Press this button when you want to activate the sound.

The button changes to .)

• If you want to deactivate the sound, press the button

again.

• To adjust the volume, press .

HOW TO USE THE APPLICATION

MICRO ON/OFF

• This function allows you to talk to your baby with your

smartphone. To activate this function, press the green key

represented by a microphone . (The button changes to

• If you want to deactivate this function, press the button

again.

• To adjust the microphone’s volume, press .

PHOTO FUNCTION

• You can take a photo of your baby at any time with the Wi-Fi

Badabulle camera.

• Press the button when you want to take a photo.

• The photo is automatically saved in your phone’s photo le.

“SEND MUSIC” FUNCTION

• In Wi mode, you can send music from your smartphone to

the Badabulle camera.

• Press the “On” button and the playlist of music recorded on

your telephone is displayed. Click the music of your choice

to have it played via the camera.

• Press “BACK” to leave the playlist without interrupting the

music.

• To stop the music, press “STOP”. Please note: on the Iphone,

you must ﬁrst create a playlist via iTunes.

*Voir conditions page 11

Balancelle

Easy

Baby Station

9kg

SETTINGS

CHANGING THE PASSWORD

• To change the password to connect yourself to your camera,

go to .

• Enter the default password “12345678”.

• Enter “Wi Settings”.

• Enter your new password, and then re-enter your password

to conﬁrm it.

WARNING : your new password must have 8

characters.

Carefully save the selected password. You will

need it to connect to the device and secure the

connection.

MOTION DETECTION

The motion detection function allows you to receive a

notiﬁcation message when your child moves in the previously

parameterized area.

Pour paramétrer cette fonction :

• Go to , Enter the default password “12345678” or the

password that you have previously changed. (cf. Changing

the password).

• Enter “Motion Detection”.

• Drag and drop the square at the place where you want to

detect motions and then double click to select an area,

you can select four detection areas. To conﬁrm press “OK”.

• To deactivate the area, double click on the area you want

deactivate.

• To enlarge or minimize the motion detection area, press and

drag the square’s edge accordingly.

• Press “OK” to save the area.

*Voir conditions page 11

Balancelle

Easy

Baby Station

9kg

NOTIFICATIONS

1- Log out of the camera and its wi-ﬁ network in the settings

of your smartphone.

2 - Enter the application “See my Baby”.

3 - Click on the blue arrow of the camera in question.

4 - Enable notiﬁcations by checking the corresponding box.

5 - Reconnect to the camera via WiFi or 3G.

• Go to . Enter the default password “12345678”

or the password that you have previously changed.

(cf. Changing the password).

• Then go to “Notication Setting”.

• Set the motion detection notication:

-Go to “Motion Detection”.

-Set the time of your baby’s motion after which you want to

receive a notiﬁcation by using the trigger duration.

-Click “OK” to save it.

If your baby moves, you will receive a “Motion detected”

notiﬁcation.

• Setting the bedroom temperature notication:

-Go to “Temperature Detection”.

*Voir conditions page 11

Balancelle

Easy

Baby Station

9kg

-You can adjust the frequency of the notiﬁcations using the

“Trigger duration” cursor.

-You can also select the time after which once the

temperature is exceeded you want to receive a notiﬁcation.

If the temperature is abnormal based on your settings, you

will receive a «Temperature abnormal» notiﬁcation.

• Setting the sound volume notication

- Go to “Volume Detection”.

- Set the sound level above which you want to be alerted.

- Select the detection duration of your baby’s parameterized

sound volume above which you want to receive a notiﬁcation.

When your baby cries, you will receive a “Voice too loud”

notiﬁcation.

• CONNECTING A 2

SMARTPHONE

-Go to the camera list and

press the arrow to the right of

your camera’s name.

Press “Generate QRCode”.

The QR Code appears at the

bottom of the window.

*Voir conditions page 11

Balancelle

Easy

Baby Station

9kg

IMPORTANT INFORMATION

Only use the alternating current adapters supplied. The use

of other alternating current adapters can damage the device.

Never use extensions with adapters. Unplug the alternating

current adapter from the wall socket when the unit is not to

be used. Keep the adapter cable out of baby’s reach (more

than 1 m away). Attach the cable to the wall to keep the cable

away from baby. Protect the power cable to ensure that it is

not likely to be trod on or pinched, particularly at the plugs or

plug sockets. The optimal temperature range for the device

is from -9°C to +50°C. Do not leave the device exposed to

direct sunlight for extended periods or near a source of heat,

or in a damp or dusty environment. Clean the device with

a soft, dry cloth. Never use abrasive cleaning products or

chemical solvents. Do not open the unit as it contains no

user-serviceable parts. Electrical and electronic equipment

is subject to separate waste collection. Do not dispose of

waste electrical and electronic equipment along with your

unsorted municipal waste but instead make it available for

separate collection. The use of a babyphone can under no

circumstances replace vigilant parental supervision. Keep the

adapter and the units out of reach of children. Complies with

the requirements of the R&TTE directive (1999/05/CE) of the

European Parliament and of the Council of March 9, 1999

(Please see the attached declaration of conformity).

-With the second Smartphone

that you want to connect,

download the “See my Baby”

application (cf. START).

-Start the application. The

camera list is displayed

(The list of cameras is only

displayed if you are already

connected in 3G mode).

-Press “+” to add this camera

to the 2

Smartphone. Then

enter “Camera Detail”.

-The 2

Smartphone is automatically connected to the camera

and all the parameters are loaded.

-Press “OK” to terminate.

RESETTING THE PARAMETERS

• Go to . Enter the default password “12345678” or the

password that you have previously changed. (cf. Changing

the password).

• Go to “Reset to Default” and then press “OK”.

RESETTING THE PASSWORD

• Press the button (9) for 3 seconds.

-Still with the 2

Smartphone,

press “QR Code Scan”, and

point it to the 1st Smartphone

which generated the QR Code.

Page is loading ...

Badabulle B014404 User manual

Brand: Badabulle

Model: B014404

Type: User manual

Download PDF

report

in other languages

français: Badabulle B014404 Manuel utilisateur

Badabulle B014404 User manual

Badabulle B014404 User manual

in other languages

Other documents