hs36 - 36" OUtdOOr Fireplace hOOd

hs42 - 42" OUtdOOr Fireplace hOOd

1. Removeprotectivelmfromstainlesshood.

2. Alignthreenotcheslocatedonbacksideofhoodwithfrontfaceofreplace(seeFigure).Notchesshouldbeatleast2"up

fromedgeofreplaceopening.

3. Holdreplacehoodinplace.Usinga#34(0.11dia.)drillbit,drillthrough3notches.

4. Insert3screwsthroughnotchesinhoodintoholesinreplace.

OUtdOOr Fireplace hOOd

iNstallatiON iNstrUctiONs