Integra DTR-5.9 Owner's manual
- Category
- AV receivers
- Type
- Owner's manual
C
K
R
L
R
L
R
L
NA
FM
AM
75
ZONE 2 SPEAKERS
R
L
L
R
L
R
SURR BACK SPEAKERS
SURR SPEAKERS
FRONT SPEAKERS
CENTER SPEAKER
Bi-AMP for FRONT SPEAKERS
AC INLET
ZONE 2
PRE OUT
FRONT
SUBWOOFER
CENTERSURR
PRE OUT
SURR BACK
Front
Left
Surround
Left
Surround
Back
Left
Surround
Back
Right
Surround
Right
Listener
TV
Sub
woofer
Front
Right
Center
Front
Left
Surround
Left
Surround
Back
Left
Surround
Back
Right
Surround
Right
Listener
TV
Front
Right
Center
Sub
woofer
5/8''
(15mm)
Surround right
speaker
Surround back
right speaker
Surround back
left speaker
Surround
left speaker
Powered
subwoofer
Front left
speaker
Front right
speaker
Center
speaker
SN 29344691(C) Copyright 2008 ONKYO CORPORATION Japan. All rights reserved.
See the other side of this sheet for the AV component hookup.
Speaker Hookup
Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting
speakers and AV components (DVD player, TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,
please see the Instruction Manual.
QUICK SETUP
Model : DTR-5.9
Speaker Layout (Main Room)
* 2 9 3 4 4 6 9 1 *
IN IN
IN
IN
IN IN
IN
OUT
SUB
WOOFER
FRONT
SURR
SURR BACK
CENTER
CD
R
L
TAPE
CBL/SAT
CBL/SAT
VCR/DVR
VCR/DVR
DVD
DVD
R
L
S
V
MONITOR
OUT
S
V
OUT
OUT
IN
IN
GAME/TV
GAME/TV
SIRIUS
ANTENNA
FM
AM
75
HDMI
IN 1
(DVD)
(VCR/DVR)
(CBL/SAT)(GAME/TV)
IN 2
IN 3IN 4
ASSIGNABLE
OUT
IN 1(DVD)IN 2
OUT
COMPONENT VIDEO
Y
C
B/PB
CR/PR
ASSIGNABLE
REMOTE
CONTROL
ASSIGNABLE
COAXIAL
OPTICAL
1
(DVD)
2
(CBL/SAT)
1
(GAME/TV)
2
(CD)
DIGITAL IN
DIGITAL
OUT
ETHERNET
IN IN
IN
IN
IN IN
IN
OUT
SUB
WOOFER
FRONT
SURR
SURR BACK
CENTER
CD
R
L
TAPE
CBL/SAT
CBL/SAT
VCR/DVR
VCR/DVR
DVD
DVD
R
L
S
V
MONITOR
OUT
S
V
OUT
OUT
IN
IN
GAME/TV
GAME/TV
SIRIUS
ANTENNA
FM
AM
75
HDMI
IN 1
(DVD)
(VCR/DVR)
(CBL/SAT)(GAME/TV)
IN 2
IN 3IN 4
ASSIGNABLE
OUT
IN 1(DVD)IN 2
OUT
COMPONENT VIDEO
Y
C
B/PB
CR/PR
ASSIGNABLE
REMOTE
CONTROL
ASSIGNABLE
COAXIAL
OPTICAL
1
(DVD)
2
(CBL/SAT)
1
(GAME/TV)
2
(CD)
DIGITAL IN
DIGITAL
OUT
ETHERNET
DVD player
TV
HDMI
IN
TV
VIDEO 1
IN
HDMI
OUT
Antenna input
(e.g..RF IN)
Cable/
satellite
Cable/satellite
VIDEO
OUT
AUDIO
OUT
L
R
DIGITAL
OUT
COAXIAL
Antenna input
(e.g..RF IN)
DVD player
VIDEO
OUT
AUDIO
OUT
DIGITAL
OUT
COAXIAL
L
R
HDMI
OUT
1. Input Assign
1. HDMI Input
2. Component Video Input
3. Digital Audio Input
Menu
1. Input Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Lock Setup
1-1. HDMI Input
DVD HDMI1
VCR/DVR HDMI2
CBL/SAT HDMI3
GAME/TV HDMI4
AV Component Hookup
IF NO HDMI
Please ensure the monitor input
(VIDEO 1, VIDEO 2, VIDEO 3, etc.)
selected corresponds to actual
connection used.
On the
front panel
See the other side of this sheet for the Speaker hookup.
See the other side of this sheet for the Speaker hookup.
With an HDMI cable you can send both audio and video with a single cable,
making connecting simple and keeping wires neat.
If you have an HDMI-compatible TV and players, you can connect them
to the AV receiver with HDMI cables. Digital audio signals received
at HDMI IN inputs are output by the speakers and headphones connected
to the AV receiver.
Coaxial feed from
TV antenna
If you are not using
Cable/satellite box,
please refer to the
instruction manual.
Coaxial feed from
TV antenna
If you are not using
Cable/satellite box,
please refer to the
instruction manual.
If your TV or player doesn’t support HDMI, use the analog or digital
connections shown below.
On the front panel
Assigning the HDMI Input
If there’s no picture on your TV, you’ll need to
assign the HDMI inputs as necessary using the
onscreen setup menus.
If you connect your DVD player to the AV
receiver’s HDMI1, and connect your cable or
satellite receiver to HDMI3, as shown above, it's
not necessary to change the default
assignments.
Assigning the Digital Input
If there’s no sound, you’ll need to assign the digital inputs as
necessary using the setup menus on the DTR-5.9’s display.
If you connect your DVD player to the AV receiver’s COAXIAL 1
DIGITAL IN, and your cable/satellite receiver to the COAXIAL 2
DIGITAL IN, as shown, it’s not necessary to assign the digital input.
The onscreen setup menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected to the
composite video or S-Video MONITOR OUT, or the
COMPONENT VIDEO OUT, use the DTR5.9’s display when
changing settings.
-
1
-
2
Integra DTR-5.9 Owner's manual
- Category
- AV receivers
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI