BABYTREND ALLY, Ally 35, Ally35 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the BABYTREND ALLY Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO RE-INSTALL THE FOOT ADJUSTMENT RECLINE HANDLE
1 2
3 4
5 6
For The Instructional Video and FAQ's Visit:
www.babytrend.com
Video: https://youtu.be/Jggc8vQI-X4
or scan the QR code
Repeat for the other side
of the base.
Place spring in recessed
pocket.
In the event that the recline
handle was pushed inward
past the retention detents,
a reassembly of the recline
handle and spring will be
necessary.
To re-assemble; stand the base
on end so the front of the base
is facing upward. Press down
on one side to release the
recline foot.
Locate the spring and
recline handle
Feed the release handle
upward toward the release
handle opening and
hold in place.
2
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
7 8
9 10
11 12
TO RE-INSTALL THE FOOT ADJUSTMENT RECLINE HANDLE
Ally_35_Adjustment_Insert_102218_VR_2
Depress one side of the
recline foot and press it into
the base to join the
corresponding ttings.
Repeat for other side.
From inside of base press
the release handle through
the opening.
NOTE: Word
“Recline” facing towards you.
Pull the handle into place
until you hear a snap.
Then pull the handle forward
and release to snap it back
into place.
Continue to set into place by
carefully aligning the handle
through the opening.
Rotate the Complete
Recline foot upward.
/