Vivo STAND-V002JB Assembly Instructions

Brand: Vivo

Model: STAND-V002JB

Category: Flat panel desk mounts

Type: Assembly Instructions

This manual is also suitable for

STAND-V002JW

Pneumatic Arm Dual Monitor Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v002jb

SKU: STAND-V002JB

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

A (x1)

Clamp

B (x2)

Arm

C (x2)

Extension

Arm

D (x8)

M4x8

E (x8)

M4x12

F (x8)

M4x30

G (x1)

3mm Allen

Wrench

H (x1)

5mm Allen

Wrench

K (x4)

M6x25

L (x4)

Plastic Cap

I (x8)

Spacer

J (x1)

Cable Clip

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

NOTE: SOME HARDWARE MAY NOT BE USED

ASSEMBLY STEPS

STEP 1

TOOLS NEEDED

Phillips

Screwdriver

Adjust clamp (A) to fit desktop. Make sure pole is

secured in base by twisting clockwise, then use

3mm allen wrench (G) to tighten grub screw in

back of base.

STEP 2

Secure clamp to desktop using clamp screw. NOTE: If desktop is too thick, use 5mm allen wrench (H)

to remove clamp screw and two screws holding clamp base together. Rotate clamp base upside down

and reassemble as shown in diagram.

17.6 lbs

(8 kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

PER ARM

S=5mm

STEP 3

Adjust the locating ring to desired height and tighten to support the arms. Adjust the aluminum

support bracket to rest on the locating ring and secure using handle and the 3mm allen wrench (G).

STEP 4

Place the extension arms (C) onto the aluminum support bracket and secure each one using bolts (K)

and plastic cap (L). Tighten using a phillips head screwdriver.

S=3mm

STEP 5

OPTION A: Flat Back Monitor

Attach VESA plate of arm (B) to back of monitor using four screws (D, E) as shown in diagram.

OPTION B: Curved Back Monitor

For recessed monitors, spacers (I) and screws (F) may be required.

STEP 6

STEP 7

Attach arms (B) to extension arms (C) using bolts (K) and plastic cap (L) using a phillips head

screwdriver as shown in diagram.

Use the 5mm allen wrench (H) to adjust the spring tension inside the arms (B) as shown in diagram,

depending on the weight of your monitors.

S=5mm

STEP 8

Use the 3mm allen wrench (G) to adjust tension in arms, and the 5mm

allen wrench (H) to adjust tension in monitor brackets.

STEP 9

Insert monitor cables into cable covers on underside of arms (B). Leave enough slack to allow full

adjustment and motion of arms. Use the cable clip (J) to attach cables to pole.

S=3mm

S=5mm

LAST UPDATED: 03/05/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected]

AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Vivo STAND-V002JB Assembly Instructions

Brand: Vivo

Model: STAND-V002JB

Category: Flat panel desk mounts

Type: Assembly Instructions

This manual is also suitable for

STAND-V002JW

Download PDF

report

Vivo STAND-V002JB Assembly Instructions

This manual is also suitable for

Vivo STAND-V002JB Assembly Instructions

Related papers

Other documents