2
ASSEMBLY STEPS
STEP 1
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
A (x1)
Shelf
B (x1)
Bracket
C (x1)
Bracket
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
D (x1)
Shelf Support
E (x1)
Shelf Support
M-A (x6)
Bolt
M-B (x4)
Bolt
M-C (x2)
Clip
M-D (x1)
Allen Key
OPTION B:
For the top shelf mount, assemble the VESA
brackets (B, C) to the shelf supports (D, E) with
the VESA brackets below the flat surface of the
shelf supports. Tighten the screws (M-A) in the
order shown with the allen key (M-D).
22lbs
(9.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
M- A
M- D
M- D
M- A
Install
first
OPTION A:
For the bottom shelf mount, assemble the VESA
brackets (B, C) to the shelf supports (D, E) with
the VESA brackets above the flat surface of the
shelf supports. Tighten the screws (M-A) in the
order shown with the allen key (M-D).
Install
second
Install
first
Install
second