SALTO SYSTEMS AUST. SALTO User manual

Brand: SALTO SYSTEMS AUST.

Model: SALTO

Type: User manual

This manual is also suitable for

Danabridge V3

Danabridge V3

www.danalock.com

2

3

A

4

5

B

6

7

guide.danalock.com

The following instructions are in english. Localized versions can be

found with the QR-code below.

8

Add the Danabridge V3 in the Danalock App

Open the Danalock App and add the Danabridge by selecting ”Add

device” in the menu tab. When the Danabridge has been enrolled

you can pair it with your Danalock V3.

Go to:

Menu > My Accessory Devices > [Danabridge name] > Pairing

Select the lock you want to control with the Danabridge V3.

Connect the Danabridge V3 to wi

Go to:

Menu > My Accessory Devices > [Danabridge name] > Wi

Select your access point and enter the credentials. The Danabidge

V3 is ready for use when it has connected successfully.

9

LED signal LED color Status indication

Long white blink Power on

Constant red light Danabridge oine

Yellow blinking Danabridge is not congured

Red blinking Danabridge no server connection

Green blinking Communication in progress

Constant blue light Conguring Danabridge

Constant purple light Firmware is being updated

Constant green light Danabridge online

LED-Signals

The Danabridge V3 indicates the status of several operations with

dierent colors:

Operation Input action LED response

Clear access point and settings 10 button clicks Long red blink

Click commands

10

Firmware upgrade

Go to:

Menu > My Accessory Devices > [Danabridge name] > Firmware

and press ”Upgrade rmware”. Make sure to keep your phone near

the Danabridge V3 during the entire rmware upgrade process.

www.danalock.com

Danalock International ApS

Gammel Stillingvej 427C

8462 Harlev, DK

+45 4242 8122

[email protected]

BRIDGEV3-EN-2019/04/05

1
2
3
4
5
6
7
8
9
10
11
12

SALTO SYSTEMS AUST. SALTO User manual

Brand: SALTO SYSTEMS AUST.

Model: SALTO

Type: User manual

This manual is also suitable for

Danabridge V3

Download PDF

Other documents