Brandt ETE6110K Owner's manual

Brand: Brandt

Model: ETE6110K

Category: Tumble dryers

Type: Owner's manual

Groupe Brandt ETE6110K is a tumble dryer designed for domestic use, capable of drying laundry suitable for tumble drying. It features a control panel with a variety of drying programs, allowing you to customize the drying cycle based on the type of fabric and the desired level of dryness. The dryer has a filter that traps lint and other particles, ensuring that your clothes come out clean and free of debris.

Dear Customer,

You have just acquired a

BBRRAANNDDTT

dryer and we would like to thank you.

We have invested all our dedication and know-how in this appliance so that it would

best meet your needs. With innovation and performance, we designed it to be always

easy to use.

In the

BBRRAANNDDTT

product range, you will also find a wide choice of ovens, microwaves,

cooking hobs, ventilation hoods, cookers, dishwashers, washing machines, fridges and

freezers, that you can coordinate with your new

BBRRAANNDDTT

dryer.

Visit our website

wwwwww..bbrraannddtt..ccoomm

where you will find all of our products, as well as

useful and complementary information.

BBRRAANNDDTT..

As part of our commitment to constantly improving our products, we reserve the right to make

changes to them based on technical advances to their technical and functional features and

appearance.

Warning :

Before installing and using your appliance, please carefully read this Guide to

Installation and Use, which will allow you to quickly familiarise yourself with its operation.

CONTENTS

1 / FOR THE USER’S ATTENTION

• Safety instructions ______________________________________ 38

• Protection of the environment ____________________________ 39

• Energy savings ________________________________________ 39

2 / DESCRIPTION OF YOUR APPLIANCE

• General presentation of the tumble dryer __________________ 40

3 / INSTALLING YOUR TUMBLE DRYER

• The appliance’s surroundings ____________________________ 41

• Levelling ______________________________________________ 41

• Venting the air __________________________________________ 42

• Modifying the air outlet __________________________________ 43

• Electrical connection ____________________________________ 44

4 / PREPARING YOUR ITEMS

• Checking the condition of your textiles______________________ 45

• Inserting the items in the drum ____________________________ 45

5 / PROGRAMMING

• Presentation of the control panel __________________________ 46

• Programming a drying cycle ______________________________ 46

• Drying time ____________________________________________ 47

6 / REGULAR MAINTENANCE

• Cleaning the filter ______________________________________ 48

• Cleaning the appliance __________________________________ 49

7 / TROUBLESHOOTING ______________________________________ 50

8 / AFTER-SALES SERVICE ____________________________________ 51

1 / FOR THE USER’S ATTENTION

Important :

Keep these operating instructions with

your appliance. If you should sell your

machine or give it to someone else, ensure

that the operating instructions are provided.

Please take note of these safety instructions

before installing and using your appliance.

They have been written for your safety and

that of others.

•

SAFETY INSTRUCTIONS

•

Installation

— When you receive the appliance, unpack it or

have it unpacked immediately. Check that it

has not suffered any damage during trans-

port. Express any reservations in writing on

the delivery slip and keep a copy.

Never connect a damaged appliance.

If your appliance is damaged, please contact

your dealer.

— Before connecting your appliance, please

refer to the installation instructions.

— Your tumble dryer must be kept disconnec-

ted from the mains supply throughout the

whole installation process.

— The electrical connection details shown on

your appliance’s information plate must match

those of the local mains supply.

— Once your appliance has been installed, the

electrical plug must remain accessible.

— Do not alter or try to alter the appliance’s

characteristics. This could be dangerous.

— If your installation requires alteration, only

entrust the electrical and plumbing work to

qualified electricians and plumbers.

— The appliance must not be installed behind a

locking door, a sliding door or a door with hin-

ges on the opposite side to those on the dryer.

— Your appliance is designed for normal

domestic use. Do not use it for commercial or

industrial purposes or for any purpose other

than the one for which it has been designed

•

Children’s safety

— This appliance must only be used by adults.

Do not let children play with the appliance and

keep pets away from it.

— Keep young children away from the

appliance when it is operating.

— Keep the packaging materials out of chil-

dren’s reach (e.g.: plastic bags, polystyrene,

etc.) because they can be dangerous for chil-

dren : risk of suffocation.

— This appliance is not intended for use by per-

sons (including children) with reduced physi-

cal, sensory or mental capabilities, or lack of

experience and knowledge, unless they are

supervised or instructed concerning use of

the appliance by the person responsible for

their safety.

•

Use

Important :

Your tumble dryer is designed for

domestic use only, for drying laundry suitable

for tumble drying.

Important :

You must observe the following instruc-

tions. We decline any responsibility and res-

cind the guarantee if these recommendations

are ignored : failure to observe them can

result in material damage and physical injury.

— Use your appliance in accordance with its

method of use, thereby avoiding injury to your-

self and damage to your items. Do not use sol-

vents in the appliance (risk of fire and explo-

sion).

— Strictly comply with the care instructions on

your laundry.

— If you have to open the door of the drum

during the drying cycle, ensure that you do not

touch the drum immediately, as it is very hot.

1 / FOR THE USER’S ATTENTION

— Substances contained in soiling such as oil, acetone, alcohol, petrol, kerosene, stain removers,

turpentine or wax must be removed before drying in your machine (by using an adapted warm water

washing programme with additional detergent for example).

— Precautions for using stain-removing products : any preliminary treatment by solvent, stain-remo-

ver, aerosol, such as acetone, alcohol, gasoline, kerosene, térébentine is prohibited because these

products are very inflammable. If your laundry requires this type of treatment, this must be done

before washing. Similarly, we recommend that you do not use these products near to your dryer or,

in general, near any electrical appliance in a poorly ventilated room in order to avoid any risk of an

explosion.

— Check the vent hose at regular intervals: this can help you to avoid your appliance malfunctioning.

Water can gather in the pipe (through condensation) depending on the operating conditions (load

of laundry, how well it has been spun and the external temperature) ; in this case you must empty

out any water accumulated in the vent hose.

— If any incidents occur, which you cannot resolve using the troubleshooting advice we provide (see

“TROUBLESHOOTING”), contact our Technical Service Center.

— Before disposing of your worn-out appliance, make it unusable. Unplug and cut off the power

cable flush with the appliance and disengage the door lock.

— For your safety’s sake, if you wish to change your appliance’s power cable, contact a qualified

electrician.

— If any operating anomalies occur, disconnect your appliance and call our Technical Service

Center.

•

ENVIRONMENTAL PROTECTION

The appliance’s packaging material is recyclable. Help recycle it and protect the environment by

dropping it off in the municipal receptacles provided for this purpose.

Your appliance also contains a great amount of recyclable material. It is marked with this

label to indicate that in countries that are a members of the European Union the used

appliances should not be mixed with other waste. This way, the appliance recycling orga-

nised by your manufacturer will be done under the best possible conditions, in compliance

with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment.

Contact your town hall or your retailer for the used appliance collection points closest to your

home.

We thank you for doing your part to protect the environment.

•ENERGY SAVINGS

— Spin your laundry at high speeds ; the residual dampness will be low, as will your energy

consumption. Even synthetic textiles must be spun before drying.

— Place the maximum load in your machine ; this will optimize the energy used. When doing so,

comply with the indications on volume provided in this instruction manual.

— The drying time and the energy consumption are both increased by a high ambient temperature

and too small a room.

— Clean the filter after each drying cycle.

2 / DESCRIPTION OF YOUR APPLIANCE

Control panel

Filter

Vent hose

• GENERAL PRESENTATION OF THE TUMBLE DRYER

Fig. 01

3 / INSTALLING YOUR TUMBLE DRYER

• THE APPLIANCE’S SURROUNDINGS

Important :

We would strongly advise against :

— Installing your appliance on a carpeted floor.

If you cannot avoid this, take all possible mea-

sures not to obstruct the circulation of air at

its base.

— Installing your dryer in a location where it

could be subject to being splashed with water.

— Installing your dryer in a small closed room

(if this is the case, open the door or the win-

dow during drying)

— Installing your dryer in a poorly ventilated

room. The temperature in the room must

remain below 30°C during drying.

Advice :

Your tumble dryer releases heat. If you place it next to another appliance or a unit, we would

advise you always to leave a space in-between to assist air circulation (Fig. 02).

Important :

Use a spirit level to check that the

appliance is horizontal :

Your dryer is fitted with 4 adjustable feet

(Fig.03).

To adjust its horizontality and stability :

— Tip it slightly backwards

— Screw one or more of the feet in or out using

a spanner or a screwdriver to adjust their

height to suit the shape of the floor (Fig.03)

— Set your dryer back on its feet and check

that it is stable.

• LEVELLING

Fig. 02

Fig. 03

3 / INSTALLING YOUR TUMBLE DRYER

• VENTING THE AIR

During drying, the hot, humidity-laden air

coming from your appliance must be vented

away.

• Either directly to the room :

(Fig. 04)

if the room is well-ventilated (if possible, install

your appliance near to a half-open window)

Important :

Do not let fluff accumulate around your

dryer.

• Or via a permanent connection in

the wall :

(Fig. 05)

close to the appliance’s outlet (outlet nozzle

situated at a height of 30cm to avoid conden-

sation forming in the vent hose).

The slats in the outlet nozzle must be at least

15mm apart to avoid clogging.

Make sure the appliance is suitably ventilated

to avoid the risk of fumes being drawn from

other fuel-burning appliances, including open

fires.

• Or temporarily : (Fig. 05)

by putting the end of the hose out of an open

window.

Important :

Grills with fly screens should not be

used.

The diameter of the passage through the wall

must be at least the same as the vent hose’s

external diameter.

Important :

The vent hose must be installed hori-

zontally or upwards and must never hang

down (Fig. 06) ; it should contain as few

bends as possible (2 at most).

Fig. 04

Important :

Never duct into a chimney flue or a mechanical ventilation system, or into a system that

extracts fumes emitted by appliances fired by gas or other combustible substances (risk of dra-

wing combustion gases).

Fig. 05

Fig. 06

3 / INSTALLING YOUR TUMBLE DRYER

• MODIFYING THE AIR OUTLET

On the above drawings, the appliance is

shown from the rear.

The flexible hose must be pulled out of the

dryer.

You have three possible outlets :

— Right-hand side air outlet

— Left-hand side air outlet

— Rear air outlet

When it is delivered, your appliance’s air outlet

is on the right (viewed from the front) but you

can alter this. To do this, you must first of all

release the flexible vent hose.

— Right-hand side air outlet

- Unclip the handle by pulling it outwards and

then release the vent hose (Fig.07).

— Rear air outlet

- Follow the actions shown in the drawings

(Fig.08 et Fig.09)

- Bring the extraction pipe out through the

hatch opening

— Left-hand side air outlet

- Remove the left-hand hole cover

- Pass the hose and handle assembly through

the panel. Orienting the handle to do this.

(Fig.10).

- Insert the right-hand hole cover.

Certain precautions must be taken when ins-

talling the vent hose:

- It must not be increased in length

- It must have as few bends as possible (2 at

most) ; see Fig.06 on the previous page.

You will then obtain good performance and

maximum drying efficiency.

Important :

The following actions must be taken before connecting your dryer :

Fig. 07

Fig. 08

Fig. 09

Fig. 10

hose

handle

3 / INSTALLING YOUR TUMBLE DRYER

• ELECTRICAL CONNECTION

Danger :

For making the electrical connection to your appliance :

— Do not use an extension, an adapter, a multiple socket or a programmable timer.

— The plug must be easily accessible but be out of children’s reach.

— If in any doubt about the condition of your installation, contact your installer or a qualified pro-

fessional of the brand.

— Never eliminate the electrical Earthing system.

The electrical installation must comply with the prevailing standards and the Electricity Board’s

regulations in the country concerned, particularly as regards Earthing and installation in shower

rooms.

We cannot be held responsible for any incident caused by poor electrical installation.

Advice :

In order to find your appliance’s reference numbers easily in future, we recommend that

you note them down on the “After-Sales Service and Consumer Relations” page (this page also

explains where to find these on your appliance).

Your appliance complies with European Directives 2006/95/EEC (Low Voltage Directive) and

2004/108/EEC (Electromagnetic Compatibility).

• REPLACING THE ELECTRIC POWER CABLE

Important :

For your safety, this must be carried out by the manufacturer’s after-sales department or

by a qualified professional.

4 / PREPARING YOUR ITEMS

• CHECKING THE CONDITION OF YOUR TEXTILES

Advice :

If, before you insert your laundry in the

tumble dryer, you notice any stains, even

after washing, do not dry the items concer-

ned. As a general rule, stains that have been

ironed or tumble-dried can no longer be

removed.

Please refer to the instructions for treating

stubborn stains provided in most washing

machine operating instructions manuals

and, in particular, wash the stained items

again.

••

Preparing your items :

— Close all zip fasteners and press studs.

— Remove any loose buttons, pins or hook

fasteners.

— Knot any belts, apron strings, etc...

— Empty the pockets, especially lighters and

matches.

— Always adhere to the manufacturer's ins-

tructions when using softening products.

- Open the door to the drum by pulling the locking

flap (Fig. 11)

- Place the already washed and spun items in the

drum without heaping them up or folding them

- Close the door and reclose the flap by pressing

down on it until it locks perfectly (Fig. 11)

- Ensure that the flap is fully engaged and locked

in its housing.

• INSERTING YOUR ITEMS IN THE DRUM

Fig. 11

CLAC

••

Recommended loads :

The maximum capacity of the dryer is 5 kg.

To limit creasing and optimise drying times, we would advise you not to exceed :

- 3/4 of the volume of the drum when drying

""MMiixxeedd""

and

““CCoottttoonn””

- half the volume of the drum when drying

""DDeelliiccaatteess""

Important :

Do not tumble-dry the following

articles :

— Clothing including rubber like materials (for

example: shower caps, waterproof clothing

and textiles, linings, pillows etc.)

— Chlorofibres (Thermolactyl* for example)

*Registered trademark

— Items containing underwiring that could

become detached

— Bulky items (duvets, eiderdowns, etc...)

— Laundry that has not been spun

— Laundry cleaned with inflammable chemi-

cals.

Important :

Check the labels on your laundry

Normal

drying

Gentle

drying

Do not tumble dry

5 / PROGRAMMING

• PRESENTATION OF THE CONTROL PANEL

• PROGRAMMING A DRYING CYCLE

••

Starting the appliance :

Verify that the electrical cable is connected.

Selecting a drying time starts the appliance.

It must not be started unless the cover of the appliance and the door of the drum are properly clo-

sed.

• Choice of textile

-- CCOOTTTTOONN ::

For loads consisting of household linen, terry

towelling and cotton clothes and underclo-

thes.

Set the selector to “Cotton”

-- MMIIXXEEDD ::

For loads consisting of items of different

types (cotton and hard-wearing synthetic arti-

cles) or made from mixed fibres.

Set the selector to

""MMiixxttee""..

SYNTHETICS

For 100% synthetic fabrics.

SSeett tthhee sseelleeccttoorr ttoo ""SSyynntthheettiiccss""..

-- DDEELLIICCAATTE

ESS ::

For textiles that are particularly temperature-

sensitive (e.g. made from acrylic fibres).

SSeett tthhee sseelleeccttoorr ttoo ““DDeelliiccaatteess””..

• Selecting the drying time

The selector knob has two functions :

-- DDrryyiinngg ttiimmee

With the selector knob, select the required

drying time according to the type and the load

of laundry as well as to the spinning efficiency

of your washing machine.

The cycle starts when you choose a drying

time ; the

""DDrryyiinngg""

led will light up and will

remain lit until the cycle finishes.

Refresh cycle (Airing)

Select this programme when you want to

refresh items that have been stored in a cup-

board for a long time.

This programme can also be used for "extra

drying" if, at the end of a normal programme, you

think that some laundry items are not dry

enough.

Drying

time

120 min.

60 min.

Stop

Airing

Drying

time

MADE IN FRANCE

Mixed

Cotton

Delicates

Synthetics

ETE6110K

Air vented dryer

5 / PROGRAMMING

RECOMMENDED PROGRAMMES FOR TESTS TO EN 61121 - DIRECTIVE 95/13/CEE

Load I ”Dry cotton” 5 kg .... select “

CCoottttoonn””

Load II ”Ready to iron cotton” 5 kg .... select “

CCoottoonn””

Load III ”Easy-care textiles” 2 kg .... select

““SSyynntthheettiicc””

• DRYING TIME

885500

r.p.m.

90 to 100 mn5 kg

CCOOTTTTOONN

80 to 90 mn3,5 kg

MMIIXXEEDD

LLooaaddTTyyppee ooff tteexxttiillee DDrryyiinngg ccyyccllee ttiimmee

FFoorr aa ssppiinnnniinngg

ssppeeeedd ooff ........

550000

r.p.m.

40 to 50 mn2 kg

SSYYNNTTHHEETTIICC

50 to 60 mn1 kg

DDEELLIICCAATTEE

Lower spinning speeds mean relatively longer drying times.

The drying times below include an 8- minute

cooling phase at the end of the cycle and are given as a

general indication, as they vary according to :

• the desired result : dry, slightly damp ...

• the room temperature (the indications correspond to 20°)

• the spinning efficiency.

•

Switching off

At the end of the programme, after a 8-minu-

tes cooling , your appliance stops.

The “Maintain Filter” indicator light illumi-

nates to remind you that you must clean the fil-

ter after each drying cycle.

To do this :

- Set the program selector to “

SSttoopp

” to turn

•

Stopping the appliance

Similarly, if you need to stop your dryer before

the end of the programme selected, simply

move the selector to

““SSttoopp””

Do not forget in this case to clean the filter

As a safety measure, it is advisable to unplug

the power cable when you are not using the

appliance.

• Cooling cycle :

All programs finish with a cooling cycle that lasts for a few minutes to allow the washing to cool

gradually.

Important :

Do not stop your dryer before this cycle has finished.

Délicat

Coton

Mixte

Chemises

the power off. The led “On” goes out.

- Empty your dryer

Clean the filter (see how to do this in the

“REGULAR MAINTENANCE” section).

6 / REGULAR MAINTENANCE

Important :

We would remind you that the filter

must be cleaned after every cycle.

The filter is located on the left-hand side inside

the drum.

To clean it :

— Remove the filter from its holder by pulling it

from bottom to top

(Fig. 12).

— Clean the filter by removing the thin layer of

fluff covering it

(Fig. 13).

Important :

The filter must never be rinsed in water

(Fig. 14)

—

Replace the filter in its holder, pushing it in com-

pletel

Important :

Every 6 months, vacuum the ventilation

grills at the front and back ot the machine to

remove any dust and fluff.

Advice :

Use some of the fluff rolled into a ball

to rub the filter to unstick the fibres from it.

NON

OUI

Fig. 12

Fig. 13

Fig. 14

• CLEANING THE FILTER

YES

6 / REGULAR MAINTENANCE

Fig. 15

• CLEANING THE APPLIANCE

Advice :

To clean the control panel, the access

to the drum and the casing, use only a

sponge or a damp cloth and some soapy

water.

— Ensure that there is no fluff accumulating

round the dryer.

— Clean the door seal with a damp cloth.

— Clean the filter housing with your vacuum

cleaner once a year.

You should

nnoott uussee,,

under any circumstances

(Fig.15)

— Abrasive powders

— Metal or plastic sponges

— Alcohol-based products (alcohol, thinners, etc.)

To keep your appliance in good working order, we recommend that you use Clearit household

products.

Professional expertise for the general public

Clearit offers you professional products and adapted solutions for the daily upkeep of your house-

hold and kitchen appliances.

You may find them in conventional retail outlets, along with a complete line of by-products and

consumables.

Advice :

Some incidents may arise when you are using your dryer. Here are the points you should

check.

Fault : Check whether :

The dryer does not start :

- The plug is in the socket

- The cover is properly closed

- The programme has been selected.

The drying times are too long :

- The filter in the drum is clogged with fluff

- The laundry has been spun enough beforehand (500

rpm minimum, but spinning at 850 rpm provides better

drying times)

- The vent hose has too many bends

The laundry is too damp :

- The filter in the drum is clogged with fluff

- The type of drying has been selected correctly (too

low) : switch to the next programme up or increase

the drying time.

The laundry is too dry, too creased :

- The drying time selected is too long : the drying time

is better to be too short than too long : this avoids the

laundry becoming too dry and difficult to iron.

The items are unevenly dried :

- The types of textiles in the load are too different (e.g.

sheets together with jeans)

- The laundry has been laid correctly ‘unfolded’ in the

dryer

- The drum is not overloaded.

The synthetic items are loaded with

static electricity :

- The laundry has been dried too much

- You have used softener during washing. By using this

product, you can reduce most of the problems with

static electricity.

7 / TROUBLESHOOTING

8 / AFTER-SALES SERVICE

ORIGINAL PARTS

During any maintenance work, ask that only

cceerrttiiffiieedd oorriiggiinnaall rreeppllaacceemmeenntt ppaarrttss bbee uusseedd

••

INTERVENTIONS

Fig. 16

Any work on your appliance must be perfor-

med by a Brandt-approved qualified professio-

nal. When you call, mention your appliance’s

full reference (model, type, serial number).

These details are shown on the manufacturer’s

information plate (Fig. 16).

Brandt ETE6110K Owner's manual

Brand: Brandt

Model: ETE6110K

Category: Tumble dryers

Type: Owner's manual

Download PDF

report

Brandt ETE6110K Owner's manual

Brandt ETE6110K Owner's manual

Related papers

Other documents