Brandt 6SF-84E Owner's manual

Brand: Brandt

Model: 6SF-84E

Category: Tumble dryers

Type: Owner's manual

Brandt 6SF-84E is a vented tumble dryer designed for domestic use, suitable for drying textiles that can be tumble dried. It features a control panel with various drying programs, including options for different types of fabrics, such as synthetics, wool, and delicates. The dryer has a filter that needs to be cleaned after each drying cycle to maintain optimal performance and prevent malfunctions. It is equipped with adjustable feet for leveling and ensuring stability during operation. The dryer comes with a vent hose for expelling moist air during the drying process.

INSTALLATION & OPERATING INSTRUCTIONS

Vented tumble dryer

CONTENTS

1 / FOR THE USER’S ATTENTION

• Safety instructions ------------------------------------------------------------------------------3

• Environmental protection--------------------------------------------------------------------4

• Energy savings------------------------------------------------------------------------------------4

2 / DESCRIPTION OF YOUR APPLIANCE

• General presentation of the tumble dryer ------------------------------------------5

3 / INSTALLING YOUR TUMBLE DRYER

• The appliance’s surroundings ------------------------------------------------------------6

• Levelling-----------------------------------------------------------------------------------------------6

• Venting the air -------------------------------------------------------------------------------------7

• Modifying the air outlet -----------------------------------------------------------------------8

• Built-in installation -------------------------------------------------------------------------------9

• Combined washer/dryer installation---------------------------------------------------9

• Modifying the door opening direction ------------------------------------------------9

• Electrical connection-------------------------------------------------------------------------10

• Replacing the electric power cable --------------------------------------------------10

4 / PREPARING YOUR ITEMS

• Checking the condition of your textiles--------------------------------------------11

• Inserting your items in the drum-------------------------------------------------------11

5 / PROGRAMMING

• Presentation of the control panel -----------------------------------------------------12

• Programming a drying cycle -------------------------------------------------------------12

• Options ----------------------------------------------------------------------------------------------14

• Your dryer’s programs ----------------------------------------------------------------------15

• Programs for comparative and standardised tests--------------------------15

6 / REGULAR MAINTENANCE

• Cleaning the filter ------------------------------------------------------------------------------16

• Cleaning the appliance----------------------------------------------------------------------16

7 / TROUBLESHOOTING --------------------------------------------------------------------------------17

8 / AFTER-SALES SERVICE ---------------------------------------------------------------------------18

Warning:

Please read the user guide carefully before turning on your appliance so

that you can learn how to use it as quickly as possible.

• SAFETY INSTRUCTIONS

1 / FOR THE USER’S ATTENTION

Important:

Keep these operating instructions with

your appliance. If you should sell your

machine or give it to someone else, ensure

that the operating instructions are provided.

Please take note of these safety instructions

before installing and using your appliance.

They have been written for your safety and

that of others.

•

Installation

— When you receive the appliance, unpack it or

have it unpacked immediately. Check that it

has not suffered any damage during trans-

port. Express any reservations in writing on

the delivery slip and keep a copy. Never

connect a damaged appliance. If your

appliance is damaged, please contact your

dealer.

— Before connecting your appliance, please

refer to the installation instructions.

— Your tumble dryer must be kept disconnec-

ted from the mains supply throughout the

whole installation process.

— The electrical connection details shown on

your appliance’s information plate must match

those of the local mains supply.

— Once your appliance has been installed, the

electrical plug must remain accessible.

— Do not alter or try to alter the appliance’s

characteristics. This could be dangerous.

— If your installation requires alteration, only

entrust the electrical and plumbing work to

qualified electricians and plumbers.

— The appliance must not be installed behind a

locking or sliding door, preventing the com-

plete opening of the dryer.

— Your appliance is designed for normal

domestic use. Do not use it for commercial or

industrial purposes or for any purpose other

than the one for which it has been designed

•

Children’s safety

— This appliance must only be used by adults.

Do not let children play with the appliance and

keep pets away from it.

— Keep young children away from the

appliance when it is operating.

— Keep the packaging materials out of chil-

dren’s reach (e.g.: plastic bags, polystyrene,

etc.) because they can be dangerous for chil-

dren: risk of suffocation.

— This appliance is not intended for use by per-

sons (including children) with reduced physi-

cal, sensory or mental capabilities, or lack of

experience and knowledge, unless they are

supervised or instructed concerning use of

the appliance by the person responsible for

their safety.

•

Use

Important:

Your tumble dryer is designed for

domestic use only, for drying textiles suitable

for tumble drying.

Important:

You must observe the following instruc-

tions. We decline any responsibility and res-

cind the guarantee if these recommendations

are ignored: failure to observe them can

result in material damage and physical injury.

— Use your appliance in accordance with its

method of use, thereby avoiding injury to your-

self and damage to your items. Do not use sol-

vents in the appliance (risk of fire and explo-

sion).

— Strictly comply with the care instructions on

your laundry.

— If you have to open the door of the drum

during the drying cycle, ensure that you do not

touch the drum immediately, as it is very hot.

1 / FOR THE USER’S ATTENTION

• ENERGY SAVINGS

• ENVIRONMENTAL PROTECTION

The appliance’s packaging material is recyclable. Help recycle it and protect the environment by

dropping it off in the municipal receptacles provided for this purpose.

Your appliance also contains a great amount of recyclable material. It is marked with this

label to indicate that in countries that are a members of the European Union the used

appliances should not be mixed with other waste. This way, the appliance recycling orga-

nised by your manufacturer will be done under the best possible conditions, in compliance

with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment.

Contact your town hall or your retailer for the used appliance collection points closest to your

home.

We thank you for doing your part to protect the environment.

— Spin your textiles at high speeds; the residual dampness will be low, as will your energy consump-

tion. Even synthetic textiles must be spun before drying.

— Place the maximum load in your machine; this will optimize the energy used. When doing so, com-

ply with the indications on volume provided in this instruction manual.

— The drying time and the energy consumption are both increased by a high ambient temperature

and too small a room.

— Clean the filter after each drying cycle.

— Swich off your tumble dryer at the cycle ends.

— Substances contained in soiling such as oil, acetone, alcohol, petrol, kerosene, stain removers,

turpentine or wax must be removed before drying in your machine (by using an adapted warm water

washing programme with additional detergent for example).

— Precautions for using stain-removing products : any preliminary treatment by solvent, stain-remo-

ver, aerosol, such as acetone, alcohol, gasoline, kerosene, térébentine is prohibited because these

products are very inflammable. If your laundry requires this type of treatment, this must be done

before washing. Similarly, we recommend that you do not use these products near to your dryer or,

in general, near any electrical appliance in a poorly ventilated room in order to avoid any risk of an

explosion.

— Check the vent hose at regular intervals: this can help you to avoid your appliance malfunctioning.

Water can gather in the pipe (through condensation) depending on the operating conditions (load

of laundry, how well it has been spun and the external temperature); in this case you must empty

out any water accumulated in the vent hose.

— If any incidents occur, which you cannot resolve using the troubleshooting advice we provide (see

“TROUBLESHOOTING”), contact our Technical Service Center.

— Before disposing of your worn-out appliance, make it unusable. Unplug and cut off the power

cable flush with the appliance and make the door lock inoperable.

— For your safety’s sake, if you wish to change your appliance’s power cable, contact a qualified

electrician.

— If any operating anomalies occur, disconnect your appliance and call our Technical Service

Center.

• GENERAL PRESENTATION OF THE TUMBLE DRYER

2 / DESCRIPTION OF YOUR APPLIANCE

Fig. 01

Control panel

Vent hose

Filter

Information plate

(Reference for After-Sales)

Adjustable feet

Fig. 03

Fig. 02

Important:

We strongly advise against:

— Installing your appliance on a carpeted floor.

If you cannot avoid this, take all possible mea-

sures not to obstruct the circulation of air at

its base.

— Installing your dryer in a location where it

can be subject to being splashed with water.

— Installing your dryer in a small closed room

(if this is the case, open the door or the win-

dow during drying).

— Installing your dryer in a poorly ventilated

room. The temperature in the room must

remain below 30°C during drying.

1 cm mini

Advice:

Your tumble dryer releases heat. If you place it next to another appliance or a unit, we

advise you always to leave a space in-between to assist in air circulation (Fig. 02).

Important:

Use a level to check that the appliance

is horizontal.

Your dryer is fitted with 4 adjustable feet

(Fig.03).

To adjust the stability and levelness:

— Tip it slightly backwards.

— Screw one or more of the feet in or out using

a spanner or a screwdriver to adjust their

height to suit the shape of the floor

(Fig.03).

— Set your dryer back on its feet and check

that it is stable.

0.4 inches minimum

• LEVELLING

• THE APPLIANCE’S SURROUNDINGS

3 / INSTALLING YOUR TUMBLE DRYER

• VENTING THE AIR

During drying, the hot, humidity-laden air

coming from your appliance must be vented

away.

• Either directly to the room:

(Fig. 04)

If the room is well-ventilated (if possible, install

your appliance near to a half-open window).

• Or via a permanent connection in

the wall:

(Fig. 05)

Close to the appliance’s outlet (outlet nozzle

situated at a height of 30 cm to avoid conden-

sation forming in the vent hose).

The slats in the outlet nozzle must be at least

15mm apart to avoid clogging.

Make sure that the room is well-ventilated, to

prevent gas from appliances burning other

fuels, including open fires, from blowing back

into the room.

• Or temporarily: (Fig. 05)

By putting the end of the hose out of an open

window.

Important:

Grills with fly screens should not be

used.

The diameter of the passage through the wall

must be at least the same as the vent hose’s

external diameter.

Important:

Never duct into a chimney flue or a

mechanical ventilation system, or into a sys-

tem that extracts fumes emitted by

appliances fired by gas or other combustible

substances (risk of drawing combustion

gases).

Important:

The vent hose must be installed hori-

zontally or upwards and must never hang

down (Fig. 06); it should contain as few bends

as possible (2 at most).

Fig. 05

Fig. 04

Fig. 06

3 / INSTALLING YOUR TUMBLE DRYER

• MODIFYING THE AIR OUTLET

On the above drawings, the appliance is

shown from the rear.

On the drawings above, the appliance is

shown from the rear. The flexible hose must

be pulled out of the dryer.

You have three possible outlets:

— Right-hand side air outlet

— Left-hand side air outlet

— Rear air outlet

When it is delivered, your appliance’s air outlet

is on the right (viewed from the front) but you

can alter this. To do this, you must first of all

release the flexible vent hose.

— Right-hand side air outlet

— Unclip the handle by pulling it outwards and

then release the vent hose

(Fig.07).

— Left-hand side air outlet

(Fig.08)

— Remove the left-hand hole cover

— Pass the hose and handle assembly

through the panel, orienting the handle to do

this

(Fig. 08

➁

— Insert the right-hand hole cover.

— Rear air outlet

(Fig.09)

— Release the cover (

Fig. 08

➀

) using cutting

pliers.

— Release the duct carefully to avoid any risk

of being cut (

Fig. 09).

Certain precautions must be taken when ins-

talling the vent hose:

— It must not be increased in length.

— It must have as few bends as possible (2 at

most); see Fig.05 on the previous page.

You will then obtain good performance and

maximum drying efficiency.

Fig. 07

Fig. 08

Fig. 09

handle

➀

Important:

The following actions must be taken before connecting your dryer:

➁

Flexible vent hose

3 / INSTALLING YOUR TUMBLE DRYER

• MODIFYING THE DOOR OPENING DIRECTION

• COMBINED WASHER/DRYER INSTALLATION

• BUILT-IN INSTALLATION

An adaptation kit is available from your dealer. This is used to mount your tumble dryer above your

washing machine.

Important: Check with your dealer that the kit is compatible with your washing machine.

For safety reasons, fitting must be performed by a qualified professional.

Important: If you are fitting the appliance underneath a worktop, you must either keep the

original laminated top, or replace it with a slimmer version using a kit available for this pur-

pose from your dealer. For safety reasons, the appliance must never be operated without a top.

Fig. 10

Fig. 11

Left-hand Door Right-hand door

Important: During the laboress to disassembly and reassembly of the door, you must

take the door horizontally.

If you wish, you can alter the direction the door opens as follows

(Fig. 10 or 11):

— Remove the 4 screws in the front panel holding the hinges and to remove the door.

— Reverse the hinge and fasten it back on.

— Refit the door on the hinge .

— Reverse and fix the hinge without tightening the screws completely.

— Reverse the position of the lock and the cover on the machine’s front.

— Reverse the postion of the bolt and fastin it back on.

— Fasten the hinge screws .

— Screw the screw the opposite side to the bolt.

3 / INSTALLING YOUR TUMBLE DRYER

Danger:

To make the electrical connection to your appliance:

— Do not use an extension, an adapter, a multiple socket or a programmable timer.

— The plug must be easily accessible but be out of children’s reach.

— If there's any doubt about the condition of your installation, contact your installer or a qualified

Brandt-approved professional.

— Never eliminate the electrical Earthing system.

The electrical installation must comply with the prevailing standards and the Electricity Board’s

regulations in the country concerned, particularly regarding Earthing and installation in shower

rooms.

We cannot be held responsible for any incident caused by poor electrical installation.

Advice:

In order to easily find your appliance’s reference numbers in the future, we recommend

that you note them down on the “After-Sales Service and Consumer Relations” page (this page

also explains where to find these on your appliance).

Your appliance complies with European Directives 2006/95/EEC (Low Voltage Directive) and

2004/108/EEC (Electromagnetic Compatibility).

Important:

To ensure your safety, this must be carried out by the manufacturer's after-sales service

team or a qualified professional.

• REPLACING THE ELECTRIC POWER CABLE

• ELECTRICAL CONNECTION

— Open the door by pushing (press where the

label is)

(Fig. 12)

— Check that the filter is in its housing.

— Insert washed and spun clothes loosely in

the drum without folding it or piling it up.

— Take care not to let any fabrics get caught in

the door.

— Close the door.

•

Recommended volumes:

The maximum capacity of the dryer is 8 kg.

— To reduce creasing and optimise drying

times, we recommend you do not overload the

machine.

Fig. 12

Advice:

If, before you insert your clothes in the

tumble dryer, you notice any stains, even

after washing, do not dry the items concer-

ned. As a general rule, stains that have been

ironed or tumble-dried can no longer be

removed.

Please refer to the instructions for treating

stubborn stains provided in most washing

machine instruction manuals and, in particu-

lar, wash the stained items again.

•

Preparing your items:

— Close all zippers and snap buttons.

— Remove any loose buttons, pins or hook fas-

teners.

— Knot any belts, apron strings, etc.

— Empty pockets.

— Always adhere to the manufacturer's ins-

tructions when using softening products.

Important:

Do not tumble-dry the following

articles:

— Clothing including rubber like materials (for

example: shower caps, waterproof clothing

and textiles, linings, pillows etc.).

— Chlorofibres (Thermolactyl* for example)

*Registered trademark.

— Items containing underwiring that could

become detached.

— Bulky items (duvets, eiderdowns, etc...).

— Laundry that has not been spun.

— Laundry cleaned with inflammable chemi-

cals.

Important:

Check the labels on your textiles.

Normal

drying

Gentle

drying

Do not tumble dry

• INSERTING YOUR ITEMS IN THE DRUM

• CHECKING THE CONDITION OF YOUR TEXTILES

4 / PREPARING YOUR ITEMS

• PROGRAMMING A DRYING CYCLE

• PRESENTATION OF THE CONTROL PANEL

5 / PROGRAMMING

• Starting the appliance:

— Check that the power cable is plugged in.

The appliance will not start unless the door is

properly closed.

— Select your program (see the table “Your

dryer’s programs” on the following pages) by

turning the Programs dial (it turns in both

directions).

— Press “Start/Pause” . The program

will start.

The display tells you the time remaining

and tells you more accurately, as the drying

cycle progresses.

Your dryer is fitted with a sensor enabling your dryer to automatically detect when your laundry has

reached the selected degree of dryness.

Advice:

Consult the Programs table on the next page to determine the program needed for the type

of items.

Important:

A power failure cancels the current program. In this case, therefore, you have to reset all

the programming operations. The drying time will be adjusted automatically according to the

degree of drying already achieved.

Advice:

As a safety measure, you are advised to unplug the power cable when you are not using

the appliance.

6SF-84E

Air Vented

DRY

SHIRTS

MIXED

DELICATES

Air and

Refresh

Air wollens

SYNTHETICS

EXTRA DRY

DRY

COTTON

A B C D E

Programs dial

Buzzer

Anti-creasing

Timer

Delayed stard

Display

Start/Pause

Drying - Cooling down - End of program

Program progress:

Time remaining:

Pause - Drying in progress - Cleaning filter

5 / PROGRAMMING

• Delaying a program’s start:

— Select your program using the Programs dial

Time remaining until drying cycle begins:

— Press the “Delayed Start” button to

delay the start of your program from hour to

hour until you reach the desired delay time

(max 24 hours).

— Confirm by pressing the “Start/Pause” but-

ton

The display shows you how much time

remains before your program starts. The last

hour is decreased in minutes.

Once the time delay has expired, the program

actually starts. The display tells you the time

remaining, which becomes more precise as

the drying cycle progresses.

• Adding or removing an item during

drying:

— Press the “Start/Pause” button to

interrupt drying or open the door.

The display flash.

— Insert or remove the item or items and close

the door.

— Press the “Start/Pause” button to

resume drying.

• Altering programming or drying

during operation:

If you have entered the wrong program, you

can change your selection during the cycle..

— Press the “Start/Pause” button to

interrupt drying.

The display flash.

— Select another program.

— Press the “Start/Pause” button to

resume drying.

• Cooling cycle:

All programs finish with a cooling cycle that

lasts for a few minutes to allow the washing to

cool gradually.

Important:

Do not stop your dryer before this cycle

has finished.

Program stop:

Cooling cycle:

5 / PROGRAMMING

Anti-creasing:

• Stopping the appliance:

At the end of the program, the "STOP" light

flash and the display shows "0:00"

The “Filter” light flash to remind you that

you must clean the filter after every drying

cycle:

— Turn the Programs dial to the “Off”

position .

— Empty your dryer.

— Clean the filter (see the “REGULAR MAIN-

TENANCE” section).

End of program:

Remarks:

The “Anti-creasing” and "Buzzer" options remains selected from one program to the next. You

can simply press the button to deactivate these options, even during a program

• OPTIONS

• “Buzzer” option:

— Press the “Buzzer” button . At the

end of drying, three beeps will sound every

minutes for one hour until the door is opened

or the appliance is stopped.

• “Anti-creasing” option:

The “Anti-creasing” option fluffs the textiles

every 10 minutes for up to 24 hours, until the

door is opened or the machine is turned off. It

begins as soon as the drying finishes and pre-

vents the clothes from settling in the machine.

— To select this function, press the “Anti-crea-

sing” button .

Buzzer:

Timer:

• “Timer” option:

This function allows you to complete the

drying of a few insufficiently dry items (as can

happen with mixed loads) or to quickly dry

small loads.

— Select the appropriate program for your

laundry, using the Programs dials .

— Press the “Timer” key repeatedly,

until you reach the desired drying time (time is

added in 10-minute increments).

The drying temperature is adjusted according

to the laundry type of the program selected.

— Start the dryer by pressing the

“Start/Pause” button

• PROGRAMS FOR COMPARATIVE AND STANDARDISED TESTS

5 / PROGRAMMING

• YOUR DRYER’S PROGRAMS

Programs Type of textile Drying results

COTTON

Extra drying

Cotton Dry

Dry

Cotton Dry

Ready to iron

Cotton Slightly damp

Machine pressing

Cotton Damp

MIXED

Dry

Regular textiles Dry

Ready to iron

Regular textiles Slightly damp

Other drying programs

Shirts

Synthetic, easy iron Dry

Synthetics

Delicate, synthetic Dry

Delicates

Very delicate: silk, light

synthetic lingerie ...

Dry

Refreshing and airing your textiles after prolonged storage

Air and refresh

Other textiles 15 minutes

Air woollens

Woollens 6 minutes

RECOMMENDED PROGRAMS FOR TESTS TO EN 61121 - DIRECTIVE 95/13/EEC

Load I ”Dry Cotton” 8 kg .... select “Cotton” - Dry

Load II ”Ready-to-iron Cotton” 8 kg .... select “Cotton” - Ready to iron

Load III ”Easy Maintenance Textiles” 4 kg .... select “Synthetics”

Fig. 17

Advice:

To clean the control panel, the access

to the drum and the casing, use only a

sponge or a damp cloth and some soapy

water.

— Ensure that there is no fluff accumulating

round the dryer.

— Clean the door seal with a damp cloth.

— Clean the filter housing with your vacuum

cleaner once a year.

You should not use, under any circumstances

(Fig 17)

— Abrasive powders.

— Metal or plastic sponges.

— Alcohol-based products (alcohol, thinners,

etc.).

• CLEANING THE APPLIANCE

Important:

Please remember that the filter must

be cleaned after every drying.

This is located in the lower part of your dryer.

Clean it as follows:

— Remove it from its housing by pulling it

upwards

(Fig. 13).

— Open the filter

(Fig. 14).

— Clean it by removing the thin coating of fluff

covering it

(Fig. 15).

Ensure that there is no fluff accumulating

round the dryer.

Important:

Do not wash filter with water Fig. 16).

— Re-insert it in its housing, pushing it well in.

Fig. 13

Fig. 14

Fig. 15

Fig. 16

• CLEANING THE FILTER

6 / REGULAR MAINTENANCE

Advice:

Some incidents may arise when you are using your dryer. Here are the points you should

check.

Fault: Check whether:

The dryer does not start:

- the plug is in the socket.

- the door is properly closed.

- the “Start” key was pressed (if the appliance was not

in pause).

The drying times are too long:

- the filter in the drum is clogged with fluff.

- the laundry has been spun enough beforehand

(500rpm minimum, but spinning at 850rpm provides

better drying times).

- the vent hose has too many bends.

- the air inlets and outlets are unobstructed enough to

ensure correct air circulation.

- the drying program selected matches the type of

items in the drum.

The laundry is too damp:

- the filter in the drum is clogged with fluff.

- the type of drying has been selected correctly: switch

to the next programme up.

The laundry is too dry, too creased:

- the drying program selected matches the type of

items in the drum.

The items are unevenly dried:

- the types of textiles in the load are too different (e.g.

sheets together with jeans).

- the laundry has been laid correctly ‘unfolded’ in the

dryer.

- the drum is not overloaded.

The synthetic items are loaded with

static electricity:

- the laundry has been dried too much.

- you have used softener during washing. By using this

product, you can reduce most of the problems with

static electricity.

7 / TROUBLESHOOTING

8 / AFTER-SALES SERVICE

• INTERVENTIONS

Fig.18

Any work on your appliance must be perfor-

med by a Brand-approved qualified professio-

nal. When you call, mention your appliance’s

full reference (model, type, serial number).

These details are shown on the manufacturer’s

information plate

(Fig. 18).

ORIGINAL PARTS

During any maintenance work, ask that only

certified original replacement parts be used.

NOTES

6SF-84E

WS2U00068_00 - 06/13

Brandt 6SF-84E Owner's manual

Brand: Brandt

Model: 6SF-84E

Category: Tumble dryers

Type: Owner's manual

Download PDF

report

Brandt 6SF-84E Owner's manual

Brandt 6SF-84E Owner's manual

Related papers

Other documents