WOOSIM Porti-T80/200 Operating instructions

WOOSIM
Brand
WOOSIM
Model
Porti-T80/200
Category
POS/mobile printers
Type
Operating instructions
MODEL
PORTI-T
WOOSIM SYSTEMS Inc.
#501, Daerung Technotown 3th,
448, Gasan-Dong, GeumChun-Ku,
Seoul, Korea
Tel : +82-2-2107-3700
Fax : +82-2-2107-3707
URL: http://www.woosim.com
(Kiosk&Ticket Printer)
Rev. 2.0
All specifications are subjected to change without notice
Porti-T Rev. 2.0
¦
Copyright
PORTI-T Kisok/Ticket printer operator’s manual.
Copyright 2007 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim
System Inc. and may not be reproduced in whole or in part without
the prior written permission of Woosim System Inc.
¦
Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
¦
Caution
Some semiconductor devices are easily damaged by static electricity. You should
turn the printer OFF , before you connect or removed the cable on the rear side,
in order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printerOFF .
¦
Notice
The contents of this manual are subject to change without notice.
Porti-T Rev. 2.0
¦
Introduction
The PORTI-T printer is the ideal solution for kiosk, Ticket vending machines and
receipt output for vending machines, ATM, etc
The general features of Porti-T printer are as follows:
u Very silent printing thru direct thermal printing method.
u High speed(60mm/sec, MAX)
u High resolution(203dpi : 8dots/mm).
u UART(RS-232C or TTL), Parallel[option] Interface
u Low power consumption.
u Auto cutting.
u Supports text and graphic printing.
u Easier maintenance with self-diagnostics.
u In field programming – Update Firmware, Download Fonts and Logos
u Microsoft Windows 98 / ME / 2000 / XP / VISTA / 7 compatible.
u
Flow control : Software (XON/XOFF)
Hardware flow control not supported in printer.
u Agency Approvals
Porti-T Rev. 2.0
¦
Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance of
the printer.
u
Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
Operating temperature :-10°C to 50°C
Relative humidity : 10% to 90% (No condensation)
● Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing
or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not use alcohol or other solvent.
● The AC adapter, the battery charger and the battery pack may
become warm when in use. This is normal and is not a malfunction.
● When the battery pack is used at low temperature, the length of time
the printer can be used may be shortened.
u Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
● Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
● Do not use chemical glue.
● Always use the clean thermal paper.
Porti-T Rev. 2.0
¦
Note
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
These equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception ,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Porti-T Rev. 2.0
CONTENTS
1. Outline ............................................................................................................................................7
1.1. Model classifications ............................................................................................................7
1.2. Product Part Number System ................................................................................................7
1.3. Specifications ........................................................................................................................8
2. Setting up the printer ....................................................................................................................9
2.1. Printer & Accessories ...........................................................................................................9
2.2. Printer Features ................................................................................................................... 10
2.3. Dimensions ......................................................................................................................... 11
2.3.1. Porti-T80 .................................................................................................................. 11
2.3.2. Porti-T200 ................................................................................................................ 12
2.4. Replacing the paper roll ...................................................................................................... 13
2.5. Power Supply ...................................................................................................................... 15
2.5.1. Power connector ...................................................................................................... 15
2.5.2. Specified Power supply ............................................................................................ 15
2.6. Sensor ................................................................................................................................. 16
2.6.1. Sensor connector ...................................................................................................... 16
3. Interface ........................................................................................................................................ 17
3.1. UART ( RS-232C or TTL ) 12V Cutter Version ................................................................ 17
3.2. UART ( RS-232C or TTL ) 24V Cutter Version ................................................................ 18
3.3. Parallel ................................................................................................................................ 19
4. Using the printer .......................................................................................................................... 20
4.1. Control panel ...................................................................................................................... 20
4.2. The self test ......................................................................................................................... 20
5. Consumable Parts ........................................................................................................................ 21
5.1. Recommended paper........................................................................................................... 21
5.2. Printing position .................................................................................................................. 21
Porti-T Rev. 2.0
1
1
.
.
O
O
u
u
t
t
l
l
i
i
n
n
e
e
1
1
.
.
1
1
.
.
M
M
o
o
d
d
e
e
l
l
c
c
l
l
a
a
s
s
s
s
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
1
1
.
.
2
2
.
.
P
P
r
r
o
o
d
d
u
u
c
c
t
t
P
P
a
a
r
r
t
t
N
N
u
u
m
m
b
b
e
e
r
r
S
S
y
y
s
s
t
t
e
e
m
m
PORTI-T ( ) ( ) ( )
Model name
Size of roll paper
80 : 60mm wide, 80 Ø
200: 60mm wide, 200 Ø
Interface
None: UART
P : Parallel
Power
None : DC 12~24V
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No.
2. Porti-SC30 Bluetooth Only Part No.
S40
SC30
W25
.
.
.
Wired Wireless
A RS-232C 1 Bluetooth
B TTL 2 IrDA
C USB 0 None
D RS-485
E Parallel
Z None
Porti-T Rev. 2.0
1
1
.
.
3
3
.
.
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
Item Specification
Printing method
Direct thermal line printing
Characters per line
42cpl (MAX)
Character size
Eng. : 9*24dots, 12*24dots Kor. : 16*24dots, [24*24dots]
Resolution
203dpi, 8dots/mm
Print width
2-inch (48mm, 384dots)
Printing speed
60mm / sec (MAX)
Dimensions
Porti-T80 : 190 * 87.5 * 103 mm [Standard model]
Porti-T200 : 310 * 129 * 86 mm
Weight
820.5g (except roll paper) [Standard model]
Interface
UART(RS-232C or TTL) [Standard model]
Parallel [Option]
Paper supplied
Thermal roll paper PORTI-T80 : 60mm wide, 80ø
PORTI-T200 : 60mm wide, 200ø
Barcode supplied
1-dimension : Code128, Code39, I2/5, Code93 UPC, EAN, KAN,
JAN, CODABAR
2-dimension : PDF417, QR Code, DATA Matrix
H/W spec
MCU : 32bits RISC, FLASH : 4M bytes, RAM : 8M bytes
Receive buffer size
1M bytes
Input Power
12~24VDC, Stand by 80mA and Max 3A
Option
Sliding mount assembly
Environment
conditions
Temperature
-10 °C ~ 50°C (operating)
-10°C ~ 70°C (storage)
Humidity
30% - 80% (operating)
10% - 90% (storage)
MCBF (Mean Cycle
Between failure)
Mechanical 37,000,000 lines
Head Approximately 50 Km
< Table 1 >
Porti-T Rev. 2.0
2
2
.
.
S
S
e
e
t
t
t
t
i
i
n
n
g
g
u
u
p
p
t
t
h
h
e
e
p
p
r
r
i
i
n
n
t
t
e
e
r
r
2
2
.
.
1
1
.
.
P
P
r
r
i
i
n
n
t
t
e
e
r
r
&
&
A
A
c
c
c
c
e
e
s
s
s
s
o
o
r
r
i
i
e
e
s
s
When unpacking your printer box make sure it contains the printer and all accessories.
If any accessories are missing or damage, please contact your dealer for assistance.
PORTI-T
Thermal roll paper
S
S
H
H
A
A
F
F
T
T
Porti-T Rev. 2.0
2
2
.
.
2
2
.
.
P
P
r
r
i
i
n
n
t
t
e
e
r
r
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
Porti-T Rev. 2.0
2
2
.
.
3
3
.
.
D
D
i
i
m
m
e
e
n
n
s
s
i
i
o
o
n
n
s
s
2
2
.
.
3
3
.
.
1
1
.
.
P
P
o
o
r
r
t
t
i
i
-
-
T
T
8
8
0
0
-
-
T
T
o
o
p
p
v
v
i
i
e
e
w
w
-
-
S
S
i
i
d
d
e
e
v
v
i
i
e
e
w
w
Porti-T Rev. 2.0
2
2
.
.
3
3
.
.
2
2
.
.
P
P
o
o
r
r
t
t
i
i
-
-
T
T
2
2
0
0
0
0
Porti-T Rev. 2.0
2
2
.
.
4
4
.
.
R
R
e
e
p
p
l
l
a
a
c
c
i
i
n
n
g
g
t
t
h
h
e
e
p
p
a
a
p
p
e
e
r
r
r
r
o
o
l
l
l
l
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Remove the used paper roll core if there is one.
3. Insert the paper roll as shown.
Note : Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the core because
the printer can not detect the paper end correctly.
Porti-T Rev. 2.0
4. Be sure to not the correct direction that the paper comes off the roll.
5. Push in the paper, as shown.
The paper will be loaded automatically.
Porti-T Rev. 2.0
2
2
.
.
5
5
.
.
P
P
o
o
w
w
e
e
r
r
S
S
u
u
p
p
p
p
l
l
y
y
2
2
.
.
5
5
.
.
1
1
.
.
P
P
o
o
w
w
e
e
r
r
c
c
o
o
n
n
n
n
e
e
c
c
t
t
o
o
r
r
2
2
.
.
5
5
.
.
2
2
.
.
S
S
p
p
e
e
c
c
i
i
f
f
i
i
e
e
d
d
P
P
o
o
w
w
e
e
r
r
s
s
u
u
p
p
p
p
l
l
y
y
The PORTI-T printer is equipped to an external supply electrical power.
The functions assigned to the pins in the connector are as follows:
Applicable connector : MOLEX 53014-0410 or equivalent.
The following specifications are requested for Power supply.
Input : DC 12~24 / Max 3A
Avoid using power supply which its power capacity of power current is extremely high.
51004-0400 (MOLEX)
WARNING
A wrong connection of power supply
connector could be damage the printer.
Porti-T Rev. 2.0
2
2
.
.
6
6
.
.
S
S
e
e
n
n
s
s
o
o
r
r
2
2
.
.
6
6
.
.
1
1
.
.
S
S
e
e
n
n
s
s
o
o
r
r
c
c
o
o
n
n
n
n
e
e
c
c
t
t
o
o
r
r
Front End Sensor Roll End Sensor
Applicable connector : MOLEX 53014-0310 or equivalent.
Porti-T Rev. 2.0
3
3
.
.
I
I
n
n
t
t
e
e
r
r
f
f
a
a
c
c
e
e
3
3
.
.
1
1
.
.
U
U
A
A
R
R
T
T
(
(
R
R
S
S
-
-
2
2
3
3
2
2
C
C
o
o
r
r
T
T
T
T
L
L
)
)
1
1
2
2
V
V
C
C
u
u
t
t
t
t
e
e
r
r
V
V
e
e
r
r
s
s
i
i
o
o
n
n
The PORTI-T(12V Cutter) printer has a UART(RS-232C or TTL) interface and is
connected by means of a 5 pin male connector.
In the following table, the signals present on the connector are listed:
Pin No Name Direction Function
1
TxD Output Transmit Data
2
RxD Input Receive Data
3
N.C - -
4
N.C - -
5
GND - Ground
<Molex : 51004-0500 >
Applicable connector : MOLEX 53014-0510 or equivalent.
Porti-T Rev. 2.0
3
3
.
.
2
2
.
.
U
U
A
A
R
R
T
T
(
(
R
R
S
S
-
-
2
2
3
3
2
2
C
C
o
o
r
r
T
T
T
T
L
L
)
)
2
2
4
4
V
V
C
C
u
u
t
t
t
t
e
e
r
r
V
V
e
e
r
r
s
s
i
i
o
o
n
n
The PORTI-T(24V Cutter) printer has a UART(RS-232C or TTL) interface and is
connected by means of a 3 pin male connector.
In the following table, the signals present on the connector are listed:
Applicable connector : MOLEX 53014-03P or equivalent.
Pin No Name Direction Function
1
TxD Output
Transmit Data
2
RxD Input
Receive Data
3
GND - Ground
<Molex : 51004-03P>
Porti-T Rev. 2.0
3
3
.
.
3
3
.
.
P
P
a
a
r
r
a
a
l
l
l
l
e
e
l
l
The PORTI-T printer has a Parallel interface(option) and is connected by means of a 15
pin male connector. In the following table, the signals present on the connector are listed:
Pin No Name Etc
1
STB
2
DATA BIT 0
3
DATA BIT 1
-
4
DATA BIT 2
-
5
DATA BIT 3
-
6
DATA BIT 4
7
DATA BIT 5
8
DATA BIT 6
9
DATA BIT 7
10
ACK
11
BUSY
12
P/E
13
ERR
14
INIT
15
GROUND
<Molex : 51021-1500>
Applicable connector : MOLEX 53047-1510 or equivalent.
Porti-T Rev. 2.0
4
4
.
.
U
U
s
s
i
i
n
n
g
g
t
t
h
h
e
e
p
p
r
r
i
i
n
n
t
t
e
e
r
r
4
4
.
.
1
1
.
.
C
C
o
o
n
n
t
t
r
r
o
o
l
l
p
p
a
a
n
n
e
e
l
l
4
4
.
.
2
2
.
.
T
T
h
h
e
e
s
s
e
e
l
l
f
f
t
t
e
e
s
s
t
t
u Button
- FEED Button :
When the printer is on, paper can be feed manually by pressing and
holding the FEED button for more than one second.
u Panel lamp
-POWER : Printer is ON and ready to receive data.
-ERROR :
Indicates a fault condition or a printer error.
(i.e : no paper, paper cover opened. etc.)
The self test procedure will check most of the printer functions. For self test, turn on
the power while holding down the FEED Button. The Self-Test checks the following :
1) Make sure paper roll has been installed properly.
2) The Self-Test prints the current printer status, which provides the control
ROM version and the communication method setting.
3) After printing the current printer status, Self-Test will print a pattern using the
built-in character set.
4) The Self-Test automatically ends.
The printer is ready to receive data as soon as it completed the self test.
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

WOOSIM Porti-T80/200 Operating instructions

WOOSIM
Brand
WOOSIM
Model
Porti-T80/200
Category
POS/mobile printers
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents