BenQ W1300 User manual

Category
Data projectors
Type
User manual
W1300
Digital Projector
Home Cinema Series
User Manual
BenQ W1300.book Page 1 Thursday, August 29, 2013 2:07 PM
Table of contents2
Ta b l e o f c o n t e n t s
Important safety
instructions ................... 3
Projector features........ 7
Shipping contents ......................................8
Projector exterior view...........................9
Controls and functions ..........................11
Positioning your
projector ..................... 16
Choosing a location................................16
Obtaining a preferred projected
image size..................................................17
How to determine the position of the
projector for a given screen size.........17
How to determine the recommended
screen size for a given distance ...........17
Shifting the projection lens ...................21
Connection ................. 22
HDMI connection ...................................22
Component Video connection ............23
Video connection ....................................24
Computer/PC connection.....................25
Connecting video source devices........26
Playing sound through the
projector ...................................................27
Operation ................... 28
Starting up the projector ......................28
Adjusting the projected image .............29
Using the menus......................................31
Securing the projector...........................32
Utilizing the password function ...........32
Switching input signal............................. 35
Using the preset and user modes....... 36
Advanced picture quality controls...... 39
Adjusting the sound ............................... 42
Selecting the aspect ratio...................... 43
Magnifying and searching for details... 45
Playing 3D function ................................ 45
Personalizing the projector menu
display........................................................ 45
Operating in a high altitude
environment.............................................46
Locking control keys.............................. 46
Hiding the image ..................................... 47
Freezing the image.................................. 47
Shutting down the projector ............... 47
Menu operation ...................................... 48
Maintenance ............... 58
Care of the projector............................ 58
Lamp information ................................... 59
Troubleshooting......... 65
Specifications.............. 66
Projector specifications......................... 66
Dimensions .............................................. 67
Timing chart............................................. 68
Warranty and
Copyright information73
BenQ W1300.book Page 2 Thursday, August 29, 2013 2:07 PM
Important safety instructions 3
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information
technology equipment. However, to ensure safe use of this product, it is important that
you follow the instructions mentioned in this manual and marked on the product.
Safety Instructions
1. Please read this manual before
you operate your projector. Save
it for future reference.
2. Do not look straight at the
projector lens during operation.
The intense light beam may damage
your eyes.
3. Refer servicing to qualified
service personnel.
4. Always open the lens shutter or
remove the lens cap when the
projector lamp is on.
5. In some countries, the line voltage is
NOT stable. This projector is
designed to operate safely within a
mains voltage between 100 to 240
volts AC, but could fail if power cuts
or surges of 10 volts occur. In
areas where the mains voltage
may fluctuate or cut out, it is
recommended that you connect
your projector through a power
stabilizer, surge protector or
uninterruptible power supply
(UPS).
6. Do not block the projection lens with
any objects when the projector is
under operation as this could cause
the objects to become heated and
deformed or even cause a fire. To
temporarily turn off the lamp, press
BLANK on the projector or remote
control.
BenQ W1300.book Page 3 Thursday, August 29, 2013 2:07 PM
Important safety instructions4
Safety Instructions (Continued)
7. The lamp becomes extremely hot
during operation. Allow the
projector to cool for approximately
45 minutes prior to removing the
lamp assembly for replacement.
8. Do not operate lamps beyond the
rated lamp life. Excessive operation
of lamps beyond the rated life could
cause them to break on rare
occasions.
9. Never replace the lamp assembly or
any electronic components unless
the projector is unplugged.
10. Do not place this product on an
unstable cart, stand, or table. The
product may fall, sustaining serious
damage.
11. Do not attempt to disassemble this
projector. There are dangerous high
voltages inside which may cause
death if you should come into
contact with live parts. The only
user serviceable part is the lamp
which has its own removable cover.
Under no circumstances should you
ever undo or remove any other
covers. Refer servicing only to
suitably qualified professional
service personnel.
12. When the projector is under
operation, you may sense some
heated air and odor from its
ventilation grill. It is a normal
phenomenon and not a product
defect.
BenQ W1300.book Page 4 Thursday, August 29, 2013 2:07 PM
Important safety instructions 5
Safety Instructions (Continued)
13. Do not place this projector in any of
the following environments.
- Space that is poorly ventilated or
confined. Allow at least 50 cm clearance
from walls and free flow of air around
the projector.
- Locations where temperatures may
become excessively high, such as the
inside of a car with all windows rolled up.
- Locations where excessive humidity,
dust, or cigarette smoke may
contaminate optical components,
shortening the projector's life span and
darkening the image.
- Locations near fire alarms
- Locations with an ambient temperature
above 40°C / 104°F
- Locations where the altitudes are higher
than 3000 m (10000 feet).
14. Do not block the ventilation holes.
- Do not place this projector on a blanket,
bedding or any other soft surface.
- Do not cover this projector with a cloth
or any other item.
- Do not place inflammables near the
projector.
If the ventilation holes are seriously
obstructed, overheating inside the
projector may result in a fire.
15. Always place the projector on a level,
horizontal surface during operation.
- Do not use if tilted at an angle of more
than 10 degrees left to right, nor at angle
of more than 15 degrees front to back.
Using the projector when it is not fully
horizontal may cause a malfunction of, or
damage to, the lamp.
16. Do not stand the projector on end
vertically. Doing so may cause the
projector to fall over, causing injury or
resulting in damage to the projector.
3000 m
(10000 feet)
0 m
(0 feet)
BenQ W1300.book Page 5 Thursday, August 29, 2013 2:07 PM
Important safety instructions6
Safety Instructions (Continued)
17. Do not step on the projector or place
any objects upon it. Besides probable
physical damage to the projector,
doing so may result in accidents and
possible injury.
18. Do not place liquids near or on the
projector. Liquids spilled into the
projector may cause it to fail. If the
projector does become wet,
disconnect it from the power supply's
wall socket and call BenQ to have the
projector serviced.
19. This product is capable of displaying
inverted images for ceiling mount
installation.
Use only BenQ's Ceiling Mount Kit for
mounting the projector and ensure it is
securely installed.
Ceiling mounting the
projector
We want you to have a pleasant
experience using your BenQ
projector, so we need to bring this
safety matter to your attention to
prevent possible damage to person
and property.
If you intend to mount your projector
on the ceiling, we strongly recommend
that you use a proper fitting BenQ
projector ceiling mount kit and that
you ensure it is securely and safely
installed.
If you use a non-BenQ brand
projector ceiling mount kit, there is a
safety risk that the projector may fall
from the ceiling due to an improper
attachment through the use of the
wrong gauge or length screws.
You can purchase a BenQ projector
ceiling mount kit from the place you
purchased your BenQ projector.
BenQ recommends that you also
purchase a separate Kensington lock
compatible security cable and attach it
securely to both the Kensington lock
slot on the projector and the base of
the ceiling mount bracket. This will
perform the secondary role of
restraining the projector should its
attachment to the mounting bracket
become loose.
Hg - Lamp contains mercury. Manage
in accordance with local disposal
laws. See www.lamprecycle.org.
BenQ W1300.book Page 6 Thursday, August 29, 2013 2:07 PM
Projector features 7
Projector features
• Full HD compatible
The projector is compatible with Standard Definition TV (SDTV) 480i, 576i, Enhanced
Definition television (EDTV) 480p, 576p and High Definition TV (HDTV) 720p, 1080i/p
60Hz formats, with the 1080p format providing a true 1:1 image reproduction.
• High picture quality
The projector provides excellent picture quality due to its high resolution, excellent
home theater brightness, high contrast ratio, vivid color and rich gray-scale
reproduction.
• High brightness
The projector features super high brightness to achieve excellent picture quality in
ambient light conditions, outperforming ordinary projectors.
• Vivid color reproduction
The projector features a 6-segment color wheel to produce realistic color depth and
range unattainable with lesser segment color wheels.
• Rich gray-scale
When viewed in a darkened environment, the automatic gamma control provides
excellent gray-scale display which reveals details in shadows and in night or darkened
scenes.
• Wide variety of inputs and video formats
The projector supports a wide variety of inputs for connection to your video and PC
equipment, including component video, S-Video, and composite video, as well as dual
HDMI, PC, and an output trigger for connection to automated screen and environment
lighting systems.
• ISF certified calibration control
To reach a higher standard of performance, the projector incorporates ISF NIGHT and
ISF DAY mode settings in its OSD menus, which requires professional calibration
service from authorized ISF installers.
• 3D function
To enjoy the 3D movies, videos, and sporting events in a more realistic way by
presenting the depth of the images through HDMI.
• Built-in speaker(s)
Built-in speaker(s) providing mixed mono audio when an audio input is connected.
• Intuitive lens shift
The intuitive control over lens shift lever provides flexibility in setting-up your
projector.
• SmartEco
SmartEcoâ„¢ technology saves lamp power consumption up to 70% depending on the
content brightness level when SmartEco mode is selected.
• SmartEco™ starts your dynamic power saving
The SmartEcoâ„¢ technology offers a new way of operating the projector lamp system
and saves lamp power depending on the content brightness level.
• Longest lamp life with SmartEco™ technology
The SmartEcoâ„¢ technology lowers the power consumption and increases the lamp
life.
BenQ W1300.book Page 7 Thursday, August 29, 2013 2:07 PM
Projector features8
• ECO BLANK saves the lamp power
By pressing the ECO BLANK button to hide the image and immediately lower the lamp
power at the same time.
Shipping contents
Carefully unpack and verify that you have all of the items shown below. If any of these items
are missing, please contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those illustrated.
*The warranty card is only supplied in some specific regions. Please consult your dealer for
detailed information.
Europe sku doesn't have VGA cable in standard accessories.
Optional accessories
W1300
Batteries
Warranty card
User manual CD
Quick start guide
Power cable
VGA cable 3D Glasses
BenQ.com
© 2011 BenQ Corporation. All rights reserved.
Rights of modification reserved.
P/N: 5B.J9M01.001
W1300 Video Projector
User Man ual
• User Manual
Regulation sta tements
Eco facts
Remote ControlProjector
1. Spare lamp kit
2. Ceiling mount kit
3. 3D Glasses
4. Carry bag
BenQ W1300.book Page 8 Thursday, August 29, 2013 2:07 PM
Projector features 9
Projector exterior view
1. Lamp compartment cover
2. Projection lens
3. Quick-release button
4. External control panel
(See "Projector" on page 11 for
details.)
5. Top IR remote sensor
6. Lens Shift
7. Focus ring and Zoom ring
8. Audio speaker
9. Vent (cool air intake)
10. Front IR remote sensor
11. Lens cap & string
12. HDMI 1 input jack
13. HDMI 2 input jack
14. USB Mini B input jack
15. COMPUTER PC input jack
16. RS-232 control port
17. COMPONENT input jacks
18. Kensington anti-theft lock slot
19. Rear adjuster foot
20. VIDEO input jack
21. AUDIO input jack (R)
22. AUDIO input jack (L)
23. AUDIO input jack
24. AUDIO output jack
25. Quick-release foot
26. 12 V TRIGGER out jack
27. AC power cord inlet
1
2
8
9
3
Front/upper side
4
5
6
1
7
10
11
CO MP UT ER / PC
HDMI-1 HDMI-2
VIDEO
RS-232
CO MP ON EN T
L RIN OUT
USB
-
MIN I B
12
V TRIGGER
AUDIO
AUDIO
Rear/lower side
13 14 15 16 17
19 18212223242527
12
2026
BenQ W1300.book Page 9 Thursday, August 29, 2013 2:07 PM
Projector features10
28. Celling mount holes
29. Front adjuster foot
30. Rear adjuster foot
Bottom side
29
30
28 28
28 30
BenQ W1300.book Page 10 Thursday, August 29, 2013 2:07 PM
Projector features 11
Controls and functions
Projector
8. TEMPerature indicator light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 64 for details.
9. Keystone/Arrow keys ( / Up)
Manually corrects distorted images
resulting from an angled projection.
See "Correcting keystone" on page 30 for
details.
10. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See "Indicators" on page 64 for
details.
11. AUTO
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 29 for
details.
12. Right/ Increase volume level
Increases volume. See "Adjusting the
sound level" on page 42 for details.
When the On-Screen Display (OSD)
menu is activated, the #5, #9, #12, and
#15 keys are used as directional arrows to
select the desired menu items and to
make adjustments. See "Using the menus"
on page 31 for details.
13. MODE/ENTER
Selects an available picture setup mode.
Enacts the selected On-Screen Display
(OSD) menu item. See "Using the menus"
on page 31 for details.
14. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 35 for
details.
15. Keystone/Arrow keys ( / Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 30 for
details.
1. FOCUS/ZOOM Ring
Used to adjust the projected image
appearance. See "Fine-tuning the image size
and clarity" on page 30 for details.
2. LENS SHIFT adjuster
Used to adjust the projector len up or
down. See "Shifting the projection lens" on
page 21 for details.
3. POWER indicator light
Lights up or flashes when the projector is
under operation. See "Indicators" on page
64 for details.
4. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
See "Using the
menus" on page 31 for details.
5. Left/ Decrease volume level
Decreases volume. See "Adjusting the
sound level" on page 42 for details.
6. POWER
Toggles the projector between standby
mode and on.
See "Starting up the projector" on page 28
and "Shutting down the projector" on page
47 for details.
7. ECO BLANK
U
sed to hide the screen picture.
1
3
5
8
6
7
9
10
11
12
13
14
15
4
2
BenQ W1300.book Page 11 Thursday, August 29, 2013 2:07 PM
Projector features12
Remote control
1. IR transmitter
Transmits signal to projector.
2. POWER OFF
Turns off the projector. See "Shutting
down the projector" on page 47 for
details.
3. POWER ON
Turns on the projector. See "Starting up
the projector" on page 28 for details.
4. HDMI 1
Displays the HDMI 1 source selection.
See "Switching input signal" on page 35
for details.
5. HDMI 2
Displays the HDMI 2 source selection.
See "Switching input signal" on page 35
for details.
6. Up cursor/Keystone ( / )
: Navigates and changes settings in the
OSD. See "Using the menus" on page 31
for details.
: Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 30 for
details.
7. MENU/ EXIT
MENU: Turns on the On-Screen Display
(OSD) menu.
EXIT: Goes back to previous OSD menu,
exits and saves menu settings.
See "Using the menus" on page 31 for
details.
8. Left cursor/Decrease volume level
(/ )
: Navigates and changes settings in
the OSD. See "Using the menus" on page
31 for details.
: Decreases volume.
9. ECO BLANK
Hides the screen picture.
10. Down cursor/Keystone ( / )
: Navigates and changes settings in the
OSD. See "Using the menus" on page 31
for details.
: Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 30 for
details.
11. ASPECT
Select the display aspect ratios. See
"Selecting the aspect ratio" on page 43
for details.
12. USER 1/ User 2/ User 3
Select the User memory settings.
Note: User 3 not supported for this
model.
7
8
14
21
22
24
26
31
18
2
4
5
6
1
19
13
30
20
11
12
25
27
17
16
34
33
3
10
23
28
29
15
32
9
BenQ W1300.book Page 12 Thursday, August 29, 2013 2:07 PM
Projector features 13
13. CONTRAST
Displays the CONTRAST setting bar. See
"Adjusting Contrast" on page 38 for
details.
14. COLOR
Displays the COLOR setting bar. See
"Adjusting Color" on page 38 for details.
15. COLOR TEMP
Displays the Color Temperature setting
bar. See "Selecting a Color Temperature"
on page 39 for details.
16. FINE TUNE
Displays the Color Temperature Fine
Tune setting bar. See "Setting a preferred
color temperature" on page 40 for details.
17. MUTE
Mutes the built-in speaker.
18. LIGHT
Turns on or off the remote control
backlight for about 10 seconds. Pressing
any other key while the backlight is on
keeps the backlight on for a further 10
seconds.
19. PC
Displays the PC source selection. See
"Switching input signal" on page 35 for
details.
20. COMP
Displays the COMPONENT source
selection. See "Switching input signal" on
page 35 for details.
21. VIDEO
Displays the VIDEO source selection. See
"Switching input signal" on page 35 for
details.
22. AUTO
Automatically determines the best picture
timings for the displayed image.
23. MODE/ ENTER
MODE: Choose a suitable preset mode
for usage environment.
ENTER: Enter key for OSD menu.
24. Right cursor/Increase volume level
(/ )
: Navigates and changes settings in
the OSD. See "Using the menus" on page
31 for details.
: Increase Volume.
25. SOURCE
Displays the source selection bar.
26. PIP
Enables the PIP function. Use the / /
/ keys to adjust the position of the
PIP window
27. SRS
Turns on/off the SRS (Sound Retrieval
System) surround sound effects.
28. BRIGHT
Displays the Brightness setting bar. See
"Adjusting Brightness" on page 38 for
details.
29. SHARP
Displays the Sharpness setting bar. See
"Adjusting Sharpness" on page 38 for
details.
30. TINT
Displays the Tint setting bar. See
"Adjusting Tint" on page 38 for details.
31. INVERT
Set 3D Sync Invert to Disable or Invert.
32. 3D
Displays the 3D setting bar.
33. TEST
Displays the test pattern.
34. FREEZE
Freeze/unfreezes the on-screen picture.
See "Freezing the image" on page 47 for
details.
BenQ W1300.book Page 13 Thursday, August 29, 2013 2:07 PM
Projector features14
Remote control effective range
Infra-Red (IR) remote control sensor is located on the
front and the top of the projector. The remote
control must be held at an angle within 60 degrees
perpendicular to the projector's IR remote control
sensor to function correctly. The distance between
the remote control and the sensor should not exceed
8 meters (~ 26 feet).
Make sure that there are no obstacles between the
remote control and the IR sensor on the projector
that might obstruct the infra-red beam.
A
p
p
r
o
x.
±
3
0
°
A
p
p
r
o
x
.
±
3
0
°
BenQ W1300.book Page 14 Thursday, August 29, 2013 2:07 PM
Projector features 15
Replacing the remote control battery
• Avoid excessive heat and humidity.
• There may be battery damage if the battery is incorrectly replaced.
• Replace only with the same or equivalent type recommended by the battery manufacturer.
• Dispose of the used battery according to the battery manufacturer’s instructions.
• Never throw a battery into a fire. There may be danger of an explosion.
• If the battery is dead or if you will not be using the remote control for a long time, remove
the battery to prevent damage to the remote control from possible battery leakage.
1. Remove the battery compartment cover by
sliding the cover in the direction of the
arrow.
2. Insert the supplied batteries taking note of
the polarity (+/-) as shown here.
3. Replace the cover.
BenQ W1300.book Page 15 Thursday, August 29, 2013 2:07 PM
Positioning your projector16
Positioning your projector
Choosing a location
Your projector is designed to be installed in one of four possible installation locations.
Your room layout or personal preference will dictate which installation location you select.
Take into consideration the size and position of your screen, the location of a suitable
power outlet, as well as the location and distance between the projector and the rest of
your equipment.
*To set the projector position:
1. Press MENU/EXIT on thr projector or remote control and then press / until
the system System Setup: Basic menu is highlighted.
2. Press / to highlight Projector and press / until the correct position is
selected.
1. Front
Select this location with the projector
placed on a table in front of the screen.
This is the most common way to position
the projector for quick setup and
portability.
2. Rear
Select this location with the projector
placed on a table behind the screen.
Note that a special rear projection screen
is required.
*Set Rear after you turn the projector
on.
3. Front Ceiling
Select this location with the projector
suspended upside-down from the ceiling
in front of the screen.
Purchase the BenQ Projector Ceiling
Mounting Kit from your dealer to mount
your projector on the ceiling.
*Set Front Ceiling after you turn the
projector on.
4. Rear Ceiling
Select this location with the projector
suspended upside-down from the ceiling
behind the screen.
Note that a special rear projection screen
and the BenQ Projector Ceiling Mounting
Kit are required for this installation
location.
*Set Rear Ceiling after you turn the
projector on.
BenQ W1300.book Page 16 Thursday, August 29, 2013 2:07 PM
Positioning your projector 17
Obtaining a preferred projected image size
The distance from the projector lens to the screen, the zoom setting (if available), and the
video format each factors in the projected image size.
The projector should always be placed horizontally level (like flat on a table), and
positioned directly perpendicular (90° right-angle square) to the horizontal center of the
screen. This prevents image distortion caused by angled projections (or projecting onto
angled surfaces).
If the projector is mounted on a ceiling, it must be mounted upside-down so that it
projects at a slightly downward angle.
If the projector is positioned further away from the screen, the projected image size
increases, and the vertical offset also increases proportionately.
When determining the position of the screen and projector, you will need to account for
both the projected image size and the vertical offset dimension, which are directly
proportional to the projection distance.
How to determine the position of the projector for
a given screen size
1. Refer to the table and find the closest match to your screen size in the left columns
labelled "Screen dimensions" on page 19. Using this value, look across this row to the
right to find the corresponding average distance from screen value in the column
labelled "avg" on page 19. This is the projection distance.
2. Decide the exact position of your projector according to the position of your screen
and the adjustable lens shift range.
How to determine the recommended screen size
for a given distance
This method can be used for situations where you have purchased this projector and
would like to know what screen size will fit in your room.
The maximum screen size is limited by the physical space available in your room.
1. Measure the distance between the projector and where you want to position the
screen. This is the projection distance.
2. Refer to the table and find the closest match to your measurement in the average
distance from screen column labelled "avg" on page 19. Check that your measured
distance is between the min and max distances listed on either side of the average
distance value.
3. Using this value, look across that row to the left to find the corresponding screen
diagonal listed in that row. That is the projected image size of the projector at that
projection distance.
BenQ W1300.book Page 17 Thursday, August 29, 2013 2:07 PM
Positioning your projector18
For example,
if your have a 16:9 aspect ratio screen and your measured projection distance was
5.0 m (5000 mm), the closest match in the "avg" on page 19 column is 5008 mm.
Looking across this row shows that a 130-inch screen is required.
Checking the min. projection distance in the columns of "Projection distance <D>
[mm]" on page 19 indicates that the 5000 mm measured projection distance will also
fit the 110 and 160-inch size screens. The projector can be adjusted (using the zoom
control) to display on these different screen sizes at the projection distance. Be
aware that these different screens have different vertical offset values.
If you place the projector in a different position (to that recommended). you will
have to tilt it down or up to center the image on the screen. In these situations,
some image distortion will occur. Use the Keystone function to correct the
distortion. See "Correcting keystone" on page 30 for details.
BenQ W1300.book Page 18 Thursday, August 29, 2013 2:07 PM
Positioning your projector 19
Projection dimensions
Refer to "Dimensions" on page 67 for the center of lens dimensions of this projector
before calculating the appropriate position.
<A>
<B>
<C>
<E>
<D>
<F>
<G>
Floor Installation
<F>: Screen <G>: Center of lens
<B>
<A>
<C>
<F>
<G>
<D>
<E>
Ceiling Installation
<F>: Screen <G>: Center of lens
Screen dimensions Projection distance <D> [mm] Lowest/Highest
lens position <E>
[mm]
Diagonal <A>
[inch (mm)]
Heitht
<B>
[mm]
Width
<C>
[mm]
Min
distance
(with max
zoom)
avg
Min
distance
(with min
zoom)
(min.) (max.)
26 (659) 323 574 - - 1200 32 78
30 (762) 374 664 923 1156 1388 37 90
40 (1016) 498 886 1231 1541 1851 50 120
50 (1270) 623 1107 1539 1926 2313 62 149
60 (1524) 747 1328 1846 2311 2776 75 179
70 (1778) 872 1550 2154 2696 3239 87 209
80 (2032) 996 1771 2462 3082 3701 100 239
90 (2286) 1121 1992 2769 3467 4164 112 269
100 (2540) 1245 2214 3077 3852 4627 125 299
110 (2794) 1370 2435 3385 4237 5090 137 329
120 (3048) 1494 2657 3693 4622 5552 149 359
130 (3302) 1619 2878 4000 5008 6015 162 389
140 (3556) 1743 3099 4308 5393 6478 174 418
150 (3810) 1868 3321 4616 5778 6940 187 448
160 (4064) 1992 3542 4923 6163 7403 199 478
170 (4318) 2117 3763 5231 6548 7866 212 508
180 (4572) 2241 3985 5539 6934 8328 224 538
190 (4826) 2366 4206 5847 7319 8791 237 568
200 (5080) 2491 4428 6154 7704 9254 249 598
BenQ W1300.book Page 19 Thursday, August 29, 2013 2:07 PM
Positioning your projector20
There is 5% tolerance among these numbers due to optical component variations. BenQ
recommends that if you intend to permanently install the projector, you should physically test
the projection size and distance using the actual projector before you permanently install it, so
as to make allowance for this projector's optical characteristics. This will help you determine
the exact mounting position so that it best suits your installation location.
250 (6350) 3113 5535 7693 9630 11567 311 747
300 (7620) 3736 6641 9232 11556 13881 374 897
325 (8254) 4047 7194 10000 - - 405 971
Screen dimensions Projection distance <D> [mm] Lowest/Highest
lens position <E>
[mm]
Diagonal <A>
[inch (mm)]
Heitht
<B>
[mm]
Width
<C>
[mm]
Min
distance
(with max
zoom)
avg
Min
distance
(with min
zoom)
(min.) (max.)
BenQ W1300.book Page 20 Thursday, August 29, 2013 2:07 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74

BenQ W1300 User manual

Category
Data projectors
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI