OutBack Power ProHarvest 208V Quick start guide

Type
Quick start guide

OutBack Power ProHarvest 208V is a versatile and powerful device that offers a wide range of features and capabilities. It can be used for a variety of applications, including:

  • Residential and commercial solar energy systems
  • Off-grid power systems
  • Backup power systems
  • Battery charging systems

The ProHarvest 208V is a grid-tied inverter that can convert DC power from solar panels or batteries into AC power that can be used to power your home or business. It is also compatible with a variety of battery types, including lead-acid, AGM, and lithium-ion.

The ProHarvest 208V is a rugged and durable inverter that is designed to withstand the elements. It is also easy to install and maintain.

OutBack Power ProHarvest 208V is a versatile and powerful device that offers a wide range of features and capabilities. It can be used for a variety of applications, including:

  • Residential and commercial solar energy systems
  • Off-grid power systems
  • Backup power systems
  • Battery charging systems

The ProHarvest 208V is a grid-tied inverter that can convert DC power from solar panels or batteries into AC power that can be used to power your home or business. It is also compatible with a variety of battery types, including lead-acid, AGM, and lithium-ion.

The ProHarvest 208V is a rugged and durable inverter that is designed to withstand the elements. It is also easy to install and maintain.

Indicator State
Solid
Left-right flash
Green chaser
Rapid fl
ash
Mostly on
Mostly off
Meaning
 Powered up
 Not generating
 No faults
 Power-on self-test
 Will take <1 minute
 Powered up
 Generating, no faults
 Faulted; for example,
arc fault detected
 “Off and Locked”;
unit is disabled
 Sleeping
 Not generating
900-0202-01-00 REV B
©2016 OutBack Power Technologies. All Rights Reserved.
IMPORTANT:
Not intended for use with
life support equipment.
Buttons and Indicators
ProHarvest 208V
Quick Start Guide
Date and Revision
January 2017, Revision B
This guide provides instructions for installation and setup of the product. It assumes knowledge of features, functions, and general operation.
This guide is a supplement for the purpose of expediting installation. For complete information, see the ProHarvest Installation and Safety Manual.
These instructions are for use by qualified personnel who meet all local and governmental code requirements for licensing and training
for the installation of 3-phase electrical power systems with AC and DC voltage up to 1000 volts.
!
CAUTION: EQUIPMENT DAMAGE
 This system is to be connected to 208 Vac 3-phase wye input ONLY (three phases, neutral, ground).
 This product has no user-serviceable parts. Tampering with the product will void the warranty.
 Applying incorrect polarity to DC string inputs will result in damage. This will void the warranty.
 The Communications Gateway is for indoor use only.
 All conductors (L1, L2, L3, neutral, ground) must be connected. Neutral must be bonded to earth ground. Failure
to do so can damage the inverter and void the warranty.
B
C
A
AC Cable (ordered separately)

CBL-208A-05 (5')
 CBL-208A-15 (15')
 CBL-208A-30 (30')
 CBL-208A-50 (50')
Button State Meaning
Initial state.
Once pressed, a dark blue color indicates the Gateway is in the process of discovering inverters. It will return
to the initial state with an empty serial number list if no inverters are found.
A dark red color indicates an error was found. Examples: “signal strength is too low”; “too much background
noise on circuit”. The red color only clears when the user re-tries and the fault condition no longer applies.
Once discovery has successfully occurred, this button returns to the initial state.
Button Push
1 press
2 presses
3 presses
Long press
(> 2 secs)
1 press
(after long press)
3 presses
(after long press)
4 presses
(after long press)
Result
 Make inverter beep; i.e. “Are you alive?”
 “Off & Locked”. Unit is disabled.
 Unit will not begin the 5-minute self-start.
 Start generating immediately
 If locked, unlock and generate immediately
 If system is faulted, unit will unlock but
will not generate
 “Alternate functions” mode:
Ready to accept further button pushes.
This times out after 10 seconds.
 Clear latched faults; for example, after
residual-current device (RCD) test or
arc-fault test has initiated a fault condition.
 RCD-test activation. Successful activation
of RCD test should cause a fault condition
(rapid red flashing) until cleared.
 Arc-fault test activation. Successful activation
of arc-fault detection should cause a fault
condition (rapid red flashing) until cleared.
Button and
LED Indicator
Includes AC Connector Tool,
DC Connector Tool
TOOL-KIT-1
(ordered separately)
ProHarvest 208V Inverter

PRO208-5k75
 PRO208-5k75-AUX
Communications Gateway
(ordered separately)
 PROGW-A-120
Includes SD card, Ethernet cable,
120 Vac cable
AC Splice (optional component)
 PROSPL-60
D
900-0202-01-00 REV B
©2016 OutBack Power Technologies. All Rights Reserved.
Installation
E F
Neutral
L1, L2, L3
Ground
Grid: Three-phase 208 Vac wye only
(neutral, ground, and three phases)
OCPD
Dedicated
branch circuit 60A max
overcurrent protective
device (OCPD)
Additional dedicated
branch circuits
15A OCPD
Neutral, ground,
and one phase
OCPD
Gateway
Neutral, ground,
and three phases
Equipment ground
supplied through
AC connector
Connector
is means of
DC disconnect
(see H)
~
~
=
=
ProHarvest 208V
ProHarvest 208V
Equipment
ground
PV String 1
PV String 2
Connector is
means of
AC disconnect
(see D)
OCPD ProHarvest 208V
AC Splice
box
Inverter AC cable
(5-foot to 50-foot
lengths available)
5
I
H
!
CAUTION: EQUIPMENT DAMAGE
Do not reverse the DC “+” and “–“ input polarities. This will damage the inverter and void the warranty.
1
G
1
2
3
4
6
5
7
2
8
9
10
~
=
  • Page 1 1
  • Page 2 2

OutBack Power ProHarvest 208V Quick start guide

Type
Quick start guide

OutBack Power ProHarvest 208V is a versatile and powerful device that offers a wide range of features and capabilities. It can be used for a variety of applications, including:

  • Residential and commercial solar energy systems
  • Off-grid power systems
  • Backup power systems
  • Battery charging systems

The ProHarvest 208V is a grid-tied inverter that can convert DC power from solar panels or batteries into AC power that can be used to power your home or business. It is also compatible with a variety of battery types, including lead-acid, AGM, and lithium-ion.

The ProHarvest 208V is a rugged and durable inverter that is designed to withstand the elements. It is also easy to install and maintain.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI