Havis DS-PAN-103 Installation guide
- Category
- Wall & ceiling mounts accessories
- Type
- Installation guide
This manual is also suitable for
Havis DS-PAN-103 docking station is designed for use with Panasonic CF-28/29/30 Toughbook computers. It provides a secure and stable mounting solution for your Toughbook, allowing you to easily access and use it while on the go. The DS-PAN-103 features a rugged construction and is built to withstand the demands of harsh environments, making it ideal for use in vehicles or other mobile applications.
Havis DS-PAN-103 docking station is designed for use with Panasonic CF-28/29/30 Toughbook computers. It provides a secure and stable mounting solution for your Toughbook, allowing you to easily access and use it while on the go. The DS-PAN-103 features a rugged construction and is built to withstand the demands of harsh environments, making it ideal for use in vehicles or other mobile applications.
*POWER CORD*
(NOT INCLUDED WITH DS-PAN-103)
CONNECT TO 12 VDC POWER SOURCE
RED (+), BLACK (-)
PLUG INTO "DC INPUT" PORT
OF DOCKING STATION
(4X) 1/4-20 X 5/8" BHCS
(
120
10% IN-LBS
)
(MOUNTING BRACKET OF
DOCKING STATION)
(3X) 1/4-20 X 5/8" BHCS
(
120
10% IN-LBS
)
*USE 3 SCREWS TO FASTEN
DOCK DOWN IF POSSIBLE*
*IF USING A
CF-30
COMPUTER
IN AN EXTREME RUGGED ENVIRONMENT
(OFF-ROAD/MILITARY), HAVIS
RECOMMENDS USING A CF-30 FRONT
HOOK AVAILABLE UPON REQUEST*
*RECOMMENDED HOLES
FOR MOUNTING WITH
2 SCREWS
*RECOMMENDED HOLES
FOR MOUNTING WITH
3 SCREWS
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
DS-PAN-102/103
DOCKING STATION
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
D3-0179-IS-B
(SHEET 1 OF 2)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
REV. DATE
1. REMOVE THE 1/4-20 X 5/8" BHCS HOLDING THE MOUNTING
BRACKET TO THE REST OF THE DOCKING STATION (THE SCREWS
IN THE PLASTIC SIDE-MEMBERS ON EACH SIDE OF THE DOCK).
PULL MOUNTING BRACKET OFF OF DOCKING STATION.
2. SET MOUNTING BRACKET ON TOP OF DESIRED SURFACE SO
THAT 3 OF THE HOLES ON THE MOUNTING BRACKET LINE UP WITH
3 TAPPED HOLES OF THE MOTION ACCESSORY. (IF 3 HOLES ARE
NOT AVAILABLE THEN USE 2.) SEE *RECOMMENDED HOLES* OF
THE MOUNTING BRACKET.
3. FASTEN THE MOUNTING BRACKET TO THE MOTION ACCESSORY
USING (3X) 1/4-20 X 5/8" BHCS (OR 2 DEPENDING ON AVAILABILITY).
4. PLACE DOCKING STATION OVER TOP OF MOUNTING BRACKET
SO THAT THE 2 THREADED HOLES IN EACH FLANGE OF THE
MOUNTING BRACKET LINE UP WITH THE 2 HOLES IN EACH PLASTIC
SIDE-MEMBER.
5. FASTEN THE DOCKING STATION BACK TO THE MOUNTING
BRACKET USING (4X) 1/4-20 X 5/8" BHCS.
6. TIGHTEN ALL FASTENERS TO THE INDICATED TORQUE
RECOMMENDATIONS.
7. TAKE END OF POWER CORD WITH 2 EXPOSED LEADS AND
ATTACH TO POWER SOURCE (RED TO "+" TERMINAL AND BLACK
TO "-" TERMINAL).
8. PLUG OTHER END OF POWER CORD INTO DC-INPUT PORT ON
DOCKING STATION (SEE SHEET 2). THE RED LED ON TOP OF DOCK
SHOULD LIGHT UP. IF NOT, CHECK POWER SOURCE AND CABLE
BEFORE CONTACTING HAVIS.
DS-PAN-102
DS-PAN-103
THIS PRODUCT IS USED WITH THE PANASONIC
CF-28/29/30 TOUGHBOOK COMPUTERS (USED WITH KEY
#25425).
(THE FEATURES OF THIS PRODUCT MAY BE LIMITED
DEPENDING UPON THE MODEL OF COMPUTER USED.)
HARDWARE KIT CONTENTS:
4.4
05-18-09
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT DESCRIPTION
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
REV. DATE
12-10-09
DRAWING NUMBER:
INSTALLATION INSTRUCTIONS:
WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER,
IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND
DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE
OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY
DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN
ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND
MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE
OPERATING VEHICLE.
WWW.HAVIS.COM
1-800-524-9900
F-730-019 REV A
STRAIN RELIEF LOCATIONS
*ADDITIONAL MOUNTING COMPONENT,
MOTION DEVICE, OR TUBE (NOT SHOWN)
IS MOUNTED ON THIS SURFACE
DC INPUT PORT
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
05-18-09
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
D3-0179-IS-B
(SHEET 2 OF 2)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
REV. DATE
DS-PAN-102
DS-PAN-103
NOTE: IT IS VERY IMPORTANT TO STRAIN RELIEF ALL
CABLES CONNECTED TO THE DOCKING STATION.
1. TO STRAIN-RELIEVE WIRES/CABLES, INSERT ZIP
TIE/PUSH PIN FROM HARDWARE KIT INTO ANY OF THE
FOUR STRAIN RELIEF FEATURES ON THE BOTTOM SIDE
OF THE DOCK. LOOP AND TIGHTEN ZIP TIE AROUND
WIRES/CABLES, AS REQUIRED.
NOTE: IF ORDERING AN EXTRA SET OF KEYS, REFER TO
THE KEY CODE NUMBER STAMPED ON THE KEYS. IF
KEYS ARE NOT AVAILABLE, PLEASE HAVE SERIAL
NUMBER OF DOCK AVAILABLE BEFORE CONTACTING
HAVIS.
4.4
DS-PAN-102/103
DOCKING STATION
THIS PRODUCT IS USED WITH THE PANASONIC
CF-28/29/30 TOUGHBOOK COMPUTERS (USED WITH KEY
#25425).
(THE FEATURES OF THIS PRODUCT MAY BE LIMITED
DEPENDING UPON THE MODEL OF COMPUTER USED.)
12-10-09
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT DESCRIPTION
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
REV. DATE
INSTALLATION INSTRUCTIONS:
WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER,
IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND
DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE
OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY
DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN
ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND
MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE
OPERATING VEHICLE.
WWW.HAVIS.COM
1-800-524-9900
F-730-019 REV A
DRAWING NUMBER:
-
1
-
2
Havis DS-PAN-103 Installation guide
- Category
- Wall & ceiling mounts accessories
- Type
- Installation guide
- This manual is also suitable for
Havis DS-PAN-103 docking station is designed for use with Panasonic CF-28/29/30 Toughbook computers. It provides a secure and stable mounting solution for your Toughbook, allowing you to easily access and use it while on the go. The DS-PAN-103 features a rugged construction and is built to withstand the demands of harsh environments, making it ideal for use in vehicles or other mobile applications.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Havis LPS-116 Installation guide
-
Panasonic LPS-114 Installation guide
-
Panasonic DS-PAN-112-2 Owner's manual
-
-
Havis DS-PAN-702-2 Owner's manual
-
-
Havis DS-GTC-201 Owner's manual
-
Havis-Shields DS-DELL-101-3 User manual
-
Havis DS-GTC-302-3 Owner's manual
-
Havis DS-GTC-402 Owner's manual
Other documents
-
-
Havis-Shields DS-PAN-411 User manual
-
-
Panasonic DS-PAN-212-2 Owner's manual
-
-
-
-
-
-