Honda GXV620 Owner's manual

The engine exhaust from this product

contains chemicals known to the State

of California to cause cancer, birth

defects or other reproductive harm.

Keep this owners manual handy, so you can refer to it at any time.

This owners manual is considered a permanent part of the engine and should

remain with the engine if resold.

The information and specifications included in this publication were in effect

at the time of approval for printing. Illustrations are based on the GXVGlO-

QWAtype. Honda Motor Co., Ltd. reserves the right, however, to discontinue

or change specifications or design at any time without notice and without

incurring any obligation whatever. No part of this publication may be repro-

duced without

written

permission.

INTRODUCTION

Congratulations on your selection of a Honda engine. We are certain you will

be pleased with your purchase of one of the finest engines on the market.

We want to help you get the best results from your new engine and to operate

it safely. This manual contains the information on how to do that; please read

it carefully.

As you read this manual, you will find information preceded by a -1

symbol. That information is intended to help you avoid damage to your engine,

other property, or the environment.

We suggest you read the warranty policy to fully understand its coverage

and

your responsibilities of ownership. The warranty policy is a separate document

that should have been given to you by your dealer.

When your engine needs scheduled maintenance, keep in mind that your

Honda servicing dealer is specially trained in servicing Honda engines. Your

Honda servicing dealer is dedicated to your satisfaction and will be pleased to

answer your questions and concerns.

Best Wishes,

Honda Motor Co., Ltd.

INTRODUCTION

A FEW WORDS ABOUT SAFETY

Your safety and the safety of others are very important. And using this engine

safely is an important responsibility.

To help you make informed decisions about safety, we have provided

operating procedures and other information on labels and in this manual. This

information alerts you to potential hazards that could hurt you or others.

Of course, it is not practical or possible to warn you about all the hazards

associated with operating or maintaining an engine. You must use your own

good judgment.

You will find important safety information in a variety of forms, including:

l Safety Labels - on the engine.

l Safety Messages-preceded by a safety alert symbol A and one of three

signal words, DANGER, WARNING, or CAUTION.

These signal words mean:

m You WILL be KlLLEDor SERIOUSLY HURTif you don’t follow

instructions.

m You CAN be KILLED or SERIOUSLY HURT if you don’t follow

instructions.

B You CAN be HURT if you don’t follow instructions.

l Safety Headings - such as

IMPORTANT SAFETY INFORMATION.

0 Safety Section - such as

ENGINE SAFETY.

l Instructions - how to use this engine correctly and safely.

This entire book is filled with important safety information - please read it

carefully.

2

CONTENTS

ENGINE SAFETY ....................................................................................... 5

IMPORTANT SAFETY INFORMATION ................................................. 5

CONTROLS & FEATURES ........................................................................ 7

COMPONENT & CONTROL LOCATIONS ........................................... .7

CONTROLS ........................................................................................... 9

Choke Lever ...................................................................................... 9

Throttle Lever .................................................................................. 10

Recoil Starter Grip ........................................................................... 10

FEATURES .......................................................................................... 11

Fuel-cut Solenoid ............................................................................ 11

BEFORE OPERATION ............................................................................. 12

IS YOUR ENGINE READY TO GO’,

.................................................... -12

Check the General Condition of the Engine.. .................................. 12

Check the Engine ............................................................................ 13

Check the Equipment Powered by This Engine.. ............................ 13

OPERATION ............................................................................................. 14

SAFE OPERATING PRECAUTIONS ................................................... 14

STARTING THE ENGINE .................................................................... 14

STOPPING THE ENGINE .................................................................... 17

SETTING ENGINE SPEED .................................................................. 18

SERVICING YOUR HONDA ENGINE ...................................................... 19

THE IMPORTANCE OF MAINTENANCE ............................................ 19

MAINTENANCE SAFETY .................................................................... 20

MAINTENANCE SCHEDULE .............................................................. 21

FUEL RECOMMENDATIONS.. ........................................................... .22

ENGINE OIL LEVEL CHECK ............................................................... 23

ENGINE OIL CHANGE ........................................................................ 24

OIL FILTER CHANGE .......................................................................... 25

ENGINE OIL RECOMMENDATIONS .................................................. 27

FUEL FILTER INSPECTION ................................................................ 28

3

CONTENTS

SERVICING YOUR HONDA ENGINE (continued)

AIR FILTER INSPECTION ................................................................... 29

AIR CLEANER SERVICE .................................................................... 30

SPARK PLUG SERVICE ..................................................................... 32

SPARK ARRESTER MAINTENANCE (optional equipment) .............. .34

HELPFUL TIPS & SUGGESTIONS ......................................................... .36

STORING YOUR ENGINE.. ................................................................ .36

Storage Preparation ........................................................................ 36

Storage Precautions ........................................................................ 39

Removal From Storage ...................................................................

TRANSPORTING ................................................................................. ty

TAKING CARE OF UNEXPECTED PROBLEMS ..................................... 42

ENGINE WILL NOT START ................................................................. 42

ENGINE LACKS POWER .................................................................... 42

TECHNICAL & CONSUMER INFORMATION .......................................... 43

TECHNICAL INFORMATION ............................................................... 43

Serial Number Location ................................................................... 43

Battery Connections ........................................................................ 44

Remote Control Linkage ................................................................. 45

Carburetor Modification for High Altitude Operation ...................... .46

Oxygenated Fuels ........................................................................... 47

Emission Control System Information ............................................. 48

Specifications .................................................................................. 50

CONSUMER INFORMATION .............................................................. 51

Honda Publications ......................................................................... 51

Warranty Service Information.. ....................................................... .52

QUICK REFERENCE INFORMATION ............................. Inside back cover

4

ENGINE SAFETY

IMPORTANT SAFETY INFORMATION

Most accidents with engines can be prevented if you follow all instructions in

this manual and on the engine. Some of the most common hazards are

discussed below, along with the best way to protect yourself and others.

Owner Responsibilities

Honda engines are designed to give safe and dependable service if

operated according to instructions. Read and understand this owner’s

manual before operating the engine. Failure to do so could result in

personal injury or equipment damage.

Know how to stop the engine quickly, and understand the operation of all

controls. Never permit anyone to operate the engine without proper

instructions.

Do not allow children to operate the engine. Keep children and pets away

from the area of operation.

Refuel With Care

Gasoline is extremely flammable, and gasoline vapor can explode. Refuel

outdoors, in a well-ventilated area, with the engine stopped. Never smoke

near gasoline, and keep other flames and sparks away. Always store gasoline

in an approved container. If any fuel is spilled, make sure the area is dry before

starting the engine.

Hot Exhaust

l The muffler becomes very hot during operation and remains hot for a while

after stopping the engine. Be careful not to touch the muffler while it is hot.

Let the engine cool before storing it indoors.

l To prevent fire hazards and to provide adequate ventilation for stationary

equipment applications, keep the engine at least 3feet (1 meter) away from

building walls and other equipment during operation. Do not place flam-

mable objects close to the engine.

5

ENGINE SAFETY

Carbon Monoxide Hazards

Exhaust gas contains poisonous carbon monoxide. Avoid inhalation of ex-

haust gas. Never run the engine in a closed garage or confined area.

Other Equipment

Review the instructions provided with the equipment powered by this engine

for any additional safety precautions that should be observed in conjunction

with engine startup, shutdown, or operation, or protective apparel that may be

needed to operate the equipment.

CONTROLS & FEATURES

COMPONENT & CONTROL LOCATIONS

PROTECTOR FAN COVER

PROTECTOR

(SCREEN GRID

I /

STARTER GRIP

!YL

OIL FlLLER CAP

/

AIR CLEANER

I

OIL FILTER

KC 11

, FUELFlLTER

w \

OIL DRAIN BOLT

SPAFiK PLUG

7

CONTROLS & FEATURES

J”

’ 7’

OIL DRAIN BOLT

ELECTRIC STARTER

@WA type)

I

MUFFLER

8

CONTROLS & FEATURES

CONTROLS

Choke Lever

The choke lever opens and closes the choke valve in the carburetor.

The CLOSED position enriches the fuel mixture for starting a cold engine.

The OPEN position provides the correct fuel mixture for operation after

starting, and for restarting a warm engine.

Some engine applications use a remotely-mounted choke control rather than

the engine-mounted choke lever shown here.

CHOKE LE

9

CONTROLS & FEATURES

Throttle Lever

The throttle lever controls engine speed.

Moving the throttle lever in the directions shown makes the engine run faster

or slower.

Some engine applications use a remotely-mounted throttle control rather than

the engine-mounted throttle lever shown here.

THRO

Recoil Starter Grip

Pulling the starter grip operates the recoil starter to crank the engine.

STARTER GRIP

CONTROLS & FEATURES

FEATURES

Fuel-cut Solenoid (Fuel-cut solenoid type only)

The engine is equipped with a fuel-cut solenoid that allows fuel to flow to the

carburetor main jet when the engine switch is in the ON or START position and

stops the flow of fuel to the main jet when the engine switch is in the OFF

position.

The engine must be connected to the battery to energize the fuel-cut solenoid,

allowing the engine to run. If the battery is disconnected, fuel flow to the

carburetor main jet will stop.

11

IS YOUR ENGINE READY TO GO?

For your safety, and to maximize the service life of your equipment, it is very

important to take a few moments before you operate the engine to check its

condition. Be sure to take care of any problem you find, or have your servicing

dealer correct it, before you operate the engine.

improperly maintaining this engine, orfail-

ing to correct a problem before operation,

could cause a malfunction in which you

could be seriously injured.

Always perform a preoperation inspection

before each operation, and correct any

problem.

Before beginning your preoperation checks, be sure the engine is level and the

engine switch is in the OFF position.

Check the General Condition of the Engine

l Look around and underneath the engine for signs of oil or gasoline leaks.

l Remove any excessive dirt or debris, especially around the muffler and

recoil starter.

l Look for signs of damage.

l Check that all shields and covers are in place, and all nuts, bolts, and

screws are tightened.

12

BEFORE OPERATION

Check the Engine

l Check the engine oil level (see page 23). Running the engine with a low oil

level can cause engine damage.

l Check the air filter (see page 29). A dirty air filter will restrict air flow to the

carburetor, reducing engine performance.

l Check the fuel level. Starting with a full tank will help to eliminate or reduce

operating interruptions for refueling.

Check the Equipment Powered by This Engine

Review the instructions provided with the equipment powered by this engine

for any precautions and procedures that should be followed before engine

startup.

13

OPERATION

SAFE OPERATING PRECAUTIONS

Before operating the engine for the first time, please review the

/MPORTANT

SAFETY INFORMATIONon

page 5 and the chapter titled

BEFORE OPERA-

TION.

Carbon monoxide gas is toxic. Breathing

it can cause unconsciousness and even

1 Iyriarbon monoxide. 1

Avoid any areas or actions that expose

Review the instructions provided with the equipment powered by

this engine

for any safety precautions that should be observed in conjunction with engine

startup, shutdown, or vperation.

STARTING THE ENGINE

1. If the fuel tank is equipped with a valve, be sure the fuel valve is in the OPEN

or ON position before attempting to start the engine.

14

OPERATION

2. To start a cold engine, pull the choke lever to the CLOSED position.

To restart a warm engine, leave the choke lever in the OPEN position.

Some engine applications use a remotely-mounted choke control rather

than the engine-mounted choke lever shown here.

CHOKE LE

3. Move the throttle lever away from the SLOW position, about l/3 of the way

toward the FAST position.

Some engine applications use a remotely-mounted throttle control rather

than the engine-mounted throttle lever shown here.

15

4. Turn the engine switch to the ON position.

5. Operate the starter.

RECOIL STARTER:

Pull the starter grip lightly until you feel resistance, then pull briskly. Return

the starter grip gently.

STARTER GRIP

ELECTRIC STARTER:

Turn the key to the START position, and hold it there until the engine starts.

If the engine fails to start within 5 seconds, release the key, and wait at least

10 seconds before operating the starter again.

picEiiq

Using the electric starter for more than 5 seconds at a time will overheat the

starter motor and can damage it.

When the engine starts, release the key, allowing it to return to the ON

position.

6. If the choke lever has been moved to the CLOSED position to start the

engine, gradually move it to the OPEN position as the engine warms up.

16

OPERATION

STOPPING THE ENGINE

To stop the engine in an emergency, simply turn the engine switch to the OFF

position. Under normal conditions, use the following procedure.

1. Move the throttle lever to the SLOW position.

Some engine applications use a remotely-mounted throttle

than the engine-mounted throttle lever shown here. control rather

2. Turn the engine switch to the OFF position.

3. If the fuel tank is equipped with a valve, turn the fuel valve to the CLOSED

or OFF position.

17

OPERATION

SETTING ENGINE SPEED

Position the throttle lever for the desired engine speed.

Some engine applications use a remotely-mounted throttle control rather than

the engine-mounted throttle lever shown here.

For engine speed recommendations, refer to the instructions provided with the

equipment powered by this engine.

THROlTLE LEV

(Fuel-cut solenoid type only)

Do not disconnect the battery from the engine while the engine is running.

Disconnecting the battery causes the fuel-cut solenoid to shut off the flow of

fuel to the carburetor main jet, and the engine will stop.

18

Page is loading ...

Honda GXV620 Owner's manual

Honda GXV620 Owner's manual

Related papers

Other documents