Features
•
Marble
•
Pre-drilled for 8″ (203 mm) widespread faucet
•
Pre-cut for Caxton
TM 17″ (432 mm) x 14″ (356 mm)
under-mount bathroom sink (required)
•
24″ (610 mm) x 22″ (559 mm) x 33-3/4″ (857 mm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
None applicable
MARBLE CONSOLE TABLE
K-3023
Colors/Finishes
•
WH: White Carrara Marble
•
NM: Nero Marquina Black Marble
Accessories:
•
CP: Polished Chrome
•
7: Black BlackTM
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description Colors/Finishes
K-3023 Kathryn marble console table ❑ WH ❑ NM
Required Accessories
K-9699 24″ (610 mm) frame kit ❑ NA
K-2210-G Caxton 17″ (432 mm) x 14″ (356 mm) under-mount
bathroom sink with glazed underside
❑ 0 ❑ 7
K-6839* Kathryn octagonal brass legs ❑ CP ❑ Other_____
K-2317-AF* Kathryn octagonal fireclay/French gold brass legs ❑ 0 ❑ Other_____
K-2317-BN* Kathryn octagonal fireclay/brushed nickel brass legs ❑ CP ❑ Other_____
* Only one set of legs is required.
Required Accessories Continued on Page 2.
Product Specification
The console table shall be 24″ (610 mm) in length, 22″ (559 mm) in width and 33-3/4″ (857 mm) in height. Console table shall
be made of marble. Console table shall be pre-cut for Caxton 17″ (432 mm) x 14″ (356 mm) under-mount bathroom sink.
Console table shall be pre-drilled for 8″ (203 mm) widespread faucet. Console table shall be Kohler Model K-3023-______.
KATHRYN
®
Page 1 of 2
1006901-4-
G
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Required Accessories
K-2317-CP* Kathryn octagonal fireclay/polished chrome brass legs ❑ CP ❑ Other_____
K-2317-SN* Kathryn octagonal fireclay/polished nickel brass legs ❑ CP ❑ Other_____
K-2318* Kathryn square fireclay legs ❑ CP ❑ Other_____
* Only one set of legs is required.
Technical Information
Included Component:
Kathryn console table K-3023 shown
Required Accessories:
Kathryn 24″ (610 mm) frame kit K-9699 shown
Caxton
TM 17″ (432 mm) x 14″
(356 mm) under-mount bathroom
sink
K-2210-
G
not
shown
Kathryn octagonal brass legs K-6839* shown
Kathryn octagonal fireclay/brass
legs
K-2317* not
shown
Kathryn square fireclay legs K-2318* not
shown
* Only one set of legs is required.
Installation Notes
Install this product according to the installation guide.
18"
(457 mm)
3" (76 mm)
4" (102 mm)
Wall Clip
22"
(559 mm)
3-1/16" (78 mm)
24" (610 mm)
33-3/4"
(857 mm)
18-3/16"
(478 mm)
22-1/2"
(572 mm)
19-15/16"
(506 mm)
1/2" (13 mm)
Wall Clip
Finished
Wall
Product Diagram
KATHRYN
®
KATHRYN
®
MARBLE CONSOLE TABLE
Page2of2
1006901-4-
G
/
