2. SureSill
  3. SC 350C COR 030

SureSill SC 350C COR 030, SC 350S 4COR, SC3 350C COR 120 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the SureSill SC 350C COR 030 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
S
ure
C
orner
™
Corner Flashing
for Windows
SureCorner™ Water Management Guide
SureSill™ and SureCorner™ are patent-pending technologies made only by SureSill, Ltd. SureSill™ and SureCorner™ are exclusive trademarks of SureSill, Ltd. Copyright 2007 – 2015 SureSill, Ltd.
All rights reserved.
STEP 1
Install continuous Bead of
sealant ½” in diameter in lower
corners of the rough opening.
Attach skirt by stapling skirt
under rough opening.
STEP 2
Install continuous
Bead of Sealant ½” in
diameter on the back
of the SureCorner™
along perimeter edge.
Recommended Sealant: QuadMax™ by Henkel/OSI®, Recommended Flashing Tape: TiteSeal™ Butyl Self Adhering Flashing; Butyl Flash, by OSI/Henkel.
STEP 4
Properly flash
SureCorners™ to
rough opening
using high quality
SAF flashing
material. Roll
SureCorners™ and
Flashing material.
STEP 3
Press or roll
SureCorners™ so that
the Sealant flattens out.
Mechanically attach
SureCorner with staples
near the edge.
/