![](//vs1.manuzoid.com/store/data-gzf/bc76a7b04148bd6ae9852a3e49dbde39/2/000992940.htmlex.zip/bg1.jpg)
Electric Strike Model ES-201 Installation
(Other brand of electric strike will not
work for this swing door opener)
Connect the 2 wires to the
electric strike terminals.
The other end of the wire
should be plugged into the
door opener, the most up
left jumpers, as shown.
Connect this jumper J1
Ensures these 2 jumpers
are connected.
Jumper Connection
Connect J1 to enable
electric strike.