Safety Precautions...........................1-4
Main Features......................................5
Components & Descriptions.............6-7
Before Use......................................8-13
Adjusting Massage Chair..............13-15
Start Massage...............................15-16
Menu Functions.............................17-18
Bluetooth............................................19
After Use............................................19
Troubleshooting.................................20
Safety Check.....................................21
Storage and Care..............................22
Product Specifications.......................23
Do not let children or invalids operate the product alone.
Keep children or invalids away from the product when not in use.
1. Body Scan
Upon startup the massage chair automatically runs a scan of your body to
better tailor the massage to you.
2. L-Guide Rail
Extra-long guide rail reaches up to 47.24” inches providing the perfect
contour to the S-curve in the spine.
3. Zero Gravity
Fully relax with the feeling of floating with the zero gravity mode.
4. Powerful Motor
The deluxe massage chair motor is specifically designed with performance
and power in mind while maintaining quiet.
5. Flexible Airbag
Wide moving range and strong functioning airbags allow for light to deep
pressure
6. Heat
Carbon fiber heating element around the waist warms and soothes.
7. Arm and Hand Massage
Built in arm and hand airbags promote blood circulation.
8. Bluetooth Connectivity
Connect your music device via Bluetooth to enhance your massage
experience.
MAIN FEATURES COMPONENTS AND DESCRIPTIONS
BEFORE USE
CHAIR PLACEMENT
When placing the massage chair in your home, allow 12” inches in front of
and 4” inches behing the cahir to allow it to function and recline properly.
• DO NOT place the chair in humid locations such as bathroom or saunas.
• Always place on a level surface before use.
• DO NOT use in a utility room, garage, dusty locations, or
in high temperatures above 104ºF.
• Do not place directly in sunlight or near heating appliances.
• Keep lighters, cigarettes, and other flammables away from the chair.
To avoid damage to floor surfaces and reduce noise, you may place the chair on a rug or carpet.
DO NOT use an electric blanket and ALWAYS keep the powercord from underneath the rug.
Caution is necessary when placing the masage chair as it is heavy.
Keep the chair way from Audio / Visual components as they may interfere and create noise frequency.
ASSEMBLY
Before moving the chair, turn off the main power switch located on the back of the unit
and unplug from the wall.
Using casters to move
Gently tilt the chair backwards until it sits on the rear wheels. This will allow you to move the
chair forwards or backwards. Two people may be required to move the chair successfully.
• Make sure the doorway can accommodate a width of 29.50” inches.
• Due to the heavy weight of the massage chair, caution while moving
as to not injure yourself. A second person may be necessary.
• Disconnect the remote control while moving to prevent breakage.
• Do not move the chair while in use or a person is seated in the chair.
• Only move the chair after it is unplugged from the wall. Risk of electric
shock, fire or damage may occur.
Plug the unit directly into a 3-prong outlet.
DO NOT use an external power source or transformer.
Ensure the main power switch is off before plugging in the power cord
or remote control.
Make sure to insert the power cord and remote control plug firmly and securely.
Read this manual carefully before operating, using, or installing the massage chair.
Follow the below procedure to check for any fabric damage before use.
Before using the chair, confirm there is no damage to the materials of the
armchair or other fabric components. In case of damage, even the smallest
tear, please stop using immediately, turn off the power, unplug the chair, and
contact customer service. Never use the massage chair while the unit is
dismantled or damaged, as this could cause damage to the unit or become a
serious safety hazard to you.
Under general circumstances, the massage rollers lay folded in the upper position of the
backrest and the leg rest returns to its lowest position. Please ensure this start position of the
rollers and leg rest. If the rollers and leg rest are in another position, restart the chair, and wait
for them to return to their initial positions. Only then sit in the chair.
Do not sit in the chair while the unit is operational or the leg rest is raised. This
may result in personal injury.
Return the chair to its upright position before use. Always start the chair from
the lightest massage mode. Adjust the angle of the chair accordingly to your
body shape.
Do not stand on the leg rest, this could result in damage or personal injury.
NOTE: When the main power switch located on the back of the unit is in the ON position,
and the unit is OFF, you can adjust the angle of the massage chair by pressing
BACK UP or BACK DOWN.
Allow 12” inches of space in front and behind the massage chair.
When adjusting the angle of the backrest, please make sure there
are no foreign objects, obstacles, people or pets in the way.
While sitting in the chair, using your feet gently push against the footrest to extend it
to a comfortable position up to 63” inches.
To avoid bodily injury, keep hands and feet away from
the lowering leg rest. Also keep the lowering leg rest clear of
obstacles, children, and pets.
To increase massage intensity you may remove or fold the neck pillow back.
When the neck pillow is folded, the massage intensity of the neck
area is increased. Keep the massage time to 15 minutes to avoid injury.
The neck pillow contains a weighted bag and should be kept away from
children and pets when not in use as it may cause injury.
1. Connect to Power
Connect the power cord and plug the unit into the wall. Turn the main
power switch located on the back of the unit to the ON position.
2. Powering ON
Press the POWER button on the remote control. The unit will
automatically start body scan and initiate auto massage program.
3. Navigation Buttons
Use the 4-Way keys and “OK” button to navigate through the MENU
and select desired functions.
4. Paue Button
Pressing the PAUSE button once stops all massage functions.
Pressing the PAUSE button again, engages the massage functions.
You can stop the auto mode and select a different massage mode by
pressing the MENU button or other massage buttons.
MENU FUNCTIONS
When scrolling through the menu, the corresponding active function or mode icon on the LCD remote will
illuminate in color. When a function is not active the corresponding icon will dim or display in black/white.
Return the chair to its start position before exiting. Press ON/OFF button to turn off th chair.
Raising the backrest and lowering the footrest completely.
Allow the airbags to deflate completely, rollers return to their initial position, foot sole
massage stops, heating function stops, then step out of the chair. DO NOT stand on the leg
rest. Turn off the main power switch on the back of the chair, and unplug from the wall.
This massage chair has two Bluetooth speakers built in to play your music via a compatible
Bluetooth enabled music device. Navigate to the Bluetooth Menu on the LCD remote and switch it
to ON. On your Bluetooth music player navigate to the Bluetooth menu and connect to the
massage chair name “LC6100D”.
Turn down the volume on your music device before playing through
the chair’s speakers. Adjust the volume gradually after the music is
playing as extreme volumes will cause noise disturbances in the speaker.
BLUETOOTH
The chair’s fabric (roller fabric) is susceptable to wear and tear and it is common with these
types of appliances to breakdown over time. The life expectancy will vary based on use and
operation. For safe use, periodically inspect the fabric for tearing or damage. Normal life
expectancy is about 3-years with a use of 30 minutes per day.
/