Follow the below procedure to check for any fabric damage before use.
Before using the chair, confirm there is no damage to the materials of the
armchair or other fabric components. In case of damage, even the smallest
tear, please stop using immediately, turn off the power, unplug the chair, and
contact customer service. Never use the massage chair while the unit is
dismantled or damaged, as this could cause damage to the unit or become a
serious safety hazard to you.
Under general circumstances, the massage rollers lay folded in the upper position of the
backrest and the leg rest returns to its lowest position. Please ensure this start position of the
rollers and leg rest. If the rollers and leg rest are in another position, restart the chair, and wait
for them to return to their initial positions. Only then sit in the chair.
Do not sit in the chair while the unit is operational or the leg rest is raised. This
may result in personal injury.
Return the chair to its upright position before use. Always start the chair from
the lightest massage mode. Adjust the angle of the chair accordingly to your
body shape.
Do not stand on the leg rest, this could result in damage or personal injury.
NOTE: When the main power switch located on the back of the unit is in the ON position,
and the unit is OFF, you can adjust the angle of the massage chair by pressing
BACK UP or BACK DOWN.
Allow 12” inches of space in front and behind the massage chair.
When adjusting the angle of the backrest, please make sure there
are no foreign objects, obstacles, people or pets in the way.
While sitting in the chair, using your feet gently push against the footrest to extend it
to a comfortable position up to 63” inches.
To avoid bodily injury, keep hands and feet away from
the lowering leg rest. Also keep the lowering leg rest clear of
obstacles, children, and pets.