Maytag MDB7959SHK0 User manual

THANK YOU for purchasing this high-quality product. Register your new dishwasher at www.maytag.com. In Canada, visit our

website at www.maytag.ca.

For future reference please make a note of your product model and serial numbers. These can be located near the door on the

righthand or left-hand side of the dishwasher interior.

Model Number_________________________________________ Serial Number___________________________________________

Table of Contents / Table des matières / Índice

DISHWASHER

USER INSTRUCTIONS

W11172665A

Dishwasher Safety

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

DISHWASHER SAFETY ............................ 1

WHAT’S NEW IN YOUR DISHWASHER .. 3

PARTS AND FEATURES ........................... 3

START-UP/QUICK REFERENCE .............. 4

QUICK STEPS ............................................ 5

DISHWASHER USE ................................... 5

DISHWASHER FEATURES ....................... 7

CYCLE AND OPTION DESCRIPTIONS ... 9

DISHWASHER CARE .............................. 12

TROUBLESHOOTING ............................. 13

WARRANTY ............................................. 16

SÉCURITÉ DU LAVE-VAISSELLE .......... 17

QUOI DE NEUF DANS VOTRE

LAVE-VAISSELLE .................................... 19

PIÈCES ET CARACTÉRISTIQUES ......... 19

DÉMARRAGE/GUIDE RAPIDE ............... 20

ÉTAPES RAPIDES ................................... 21

UTILISATION DU LAVE-VAISSELLE ...... 21

CARACTÉRISTIQUES DU

LAVE-VAISSELLE .................................... 24

DESCRIPTION DES PROGRAMMES

ET OPTIONS ............................................ 26

ENTRETIEN DU LAVE-VAISSELLE ........ 29

DÉPANNAGE ............................................ 30

GARANTIE ................................................ 33

SEGURIDAD DE LA LAVAVAJILLAS ...... 35

NOVEDADES DE SU LAVAVAJILLAS .... 37

PIEZAS Y CARACTERÍSTICAS .............. 37

PUESTA EN MARCHA /

REFERENCIA RÁPIDA ............................ 38

PASOS RÁPIDOS ..................................... 39

USO DE LA LAVAVAJILLAS .................... 39

CARACTERÍSTICAS DE LA

LAVAVAJILLAS.........................................42

DESCRIPCIONES DE CICLOS

Y OPCIONES ............................................ 44

CUIDADO DE LA LAVAVAJILLAS .......... 47

SOLUCIÓN DE PROBLEMAS................. 48

GARANTÍA................................................ 51

2

GROUNDING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a

malfunction or breakdown, grounding will reduce the risk of

electric shock by providing a path of least resistance for

electric current. The dishwasher is equipped with a cord

having an equipment-grounding conductor and a grounding

plug. The plug must be plugged into an appropriate outlet

that is installed and grounded in accordance with all local

codes and ordinances.

WARNING:

Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualiﬁed electrician or service representative

if you are in doubt whether the dishwasher is properly

grounded. Do not modify the plug provided with the

dishwasher; if it will not ﬁt the outlet, have a proper outlet

installed by a qualiﬁed electrician.

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal,

permanent wiring system, or an equipment-grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the dishwasher.

Tip Over Hazard

Do not use dishwasher until completely installed.

Do not push down on open door.

Doing so can result in serious injury or cuts.

WARNING

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

When using the dishwasher, follow basic precautions, including the following:

SAVE THESE INSTRUCTIONS

Read all instructions before using the dishwasher.

Use the dishwasher only for its intended function.

Use only detergents or rinse agents recommended for use in

a dishwasher, and keep them out of the reach of children.

When loading items to be washed:

1) Locate sharp items so that they are not likely to damage

the door seal; and

2) Load sharp knives with the handles up to reduce the risk

of cut-type injuries.

Do not wash plastic items unless they are marked

“dishwasher safe” or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

Do not touch the heating element during or immediately after

use.

Do not operate the dishwasher unless all enclosure panels

are properly in place.

Do not tamper with controls.

Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or

more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using

the dishwasher turn on all hot water faucets and let the

water ﬂow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is ﬂammable,

do not smoke or use an open ﬂame during this time.

Remove the door or lid to the washing compartment

when removing an old dishwasher from service or

discarding it.

3

What’s New in Your Dishwasher

Energy

Congratulations on purchasing your water and energy efcient

dishwasher! This dishwasher cleans by spraying the dishes with

water and pauses to allow the detergent to soak into and release

the soils on the dishes. The cycles are longer due to the soak

and pauses for exceptional cleaning. Your dishwasher contains

an optical water sensor. The optical water sensor is used to

determine the optimum water and energy consumption for great

cleaning performance. Efcient dishwashers run longer to save

water and energy, just as driving a car slower saves on gas. The

rst cycle using the sensor will run longer to calibrate the optical

sensor.

Performance

Rinse Aid

Using rinse aid will optimize your drying and wash performance.

This dishwasher is specically designed to be used with rinse

aid for improved drying performance and controlling buildup of

hard water deposits. The use of rinse aid greatly improves drying

by allowing water to drain from the dishes after the nal rinse.

Rinse aid also keeps water from forming droplets that can dry as

spots or streaks.

Detergent

The United States and Canada have passed restrictions

limiting the amount of phosphorus (phosphates) in household

dishwasher detergents to reduce the impact of detergents

on our environment. Major manufacturers have reformulated

their dishwasher detergent. With these recent changes it is

recommended to use tablets and packs for convenience and

improved performance.

Filtration System

Your dishwasher has the latest technology in dishwasher

ltration. The Clean Water Wash system continuously removes

food particles from the wash water for excellent performance.

Plus, there is no need to ever remove and clean the lter.

SLIDE

Parts and Features

Upper level was

h

W

ater feed tube

Model and serial number label

W

ater inlet opening

Detergent dispenser

Heating element

Overﬁll protection ﬂoa

t

Lower spray arm has pressurized sprays

that provide effective cleaning.

Rinse aid dispenser reduces

spotting and improves drying.

4

Drying - Rinse Aid is essential

You must use a drying agent such as a rinse aid for good drying

performance. Rinse aid along with the Long Power Dry (Long

Heated Dry on some models) option will provide best drying and

avoid excessive moisture in the dish washer interior.

Quick Wash - When you need fast results

Efcient dishwashers run longer to save water and energy,

just as driving a car slower saves on gas. When you need fast

results, the Quick Wash will clean your dishes using slightly

more water and energy. Select a heated drying option to include

automatic drying.

Press START every time you add a dish

IMPORTANT: If the door is opened after starting the dishwasher

(even during the Delay hours), the START button must be

pressed each time.

Push door rmly closed within 4 seconds of pressing START. If

door is not closed within 4 seconds, the START button light will

ash, an audible tone will be heard and cycle will not start.

Proper Detergent Dosing

We recommend quality tablets and packs for convenience and

improved performance.

When using other forms of detergent, it is possible to use

too much. This can lead to etching of your dishes. See “Add

Detergent” in the Dishwasher Use section, to determine the

amount of detergent needed based on soil level and water

hardness.

SLIDE

Long Power Dry (Long Heated Dry on some models)

For best drying use the Long Power Dry (Long Heated Dry on

some models)

Start-Up/Quick Reference

BOTTOM RACK

TOP RACK

CULINARY RACK (On some models)

Upper spray ar

m

Silverware basket

(Varies by model)

Cup shelf

(Varies by model)

High side shelf

(On some models

)

(Varies by model)

Rack height adjusters

Quick

5

Quick Steps

Remove bulk food and load dishwasher.

Add detergent and rinse aid.

Select a cycle and options.

Start dishwasher.

To START a cycle, press the START keypad and close the door

within 4 seconds. If the door is not closed within 4 seconds, the

START light will ash, an audible tone will sound, and the cycle

will not start.

Scrape off excess food into garbage or food disposer.

STEP 1

Prepare and Load the Dishwasher

IMPORTANT: Remove leftover food, bones, toothpicks, and

other hard items from the dishes. Remove labels from containers

before washing.

Rack may vary by model.

■ Check that nothing blocks the upper or lower spray arm.

Items in rack can block the spray arms.

■ Check that when the dishwasher door is closed, no items are

blocking the detergent dispenser.

■ Tough soiled items should be loaded with soiled surfaces

facing down and inward to the spray. This will improve

cleaning and drying results.

■ Avoid overlapping items like bowls or plates that may trap

food.

■ Place plastics, small plates, and glasses in the upper rack.

Wash only plastic items marked “dishwasher safe.”

■ To avoid thumping/clattering noises during operation,

load dishes so they do not touch one another. Make sure

lightweight load items are secured in the racks.

■ When loading silverware, always place sharp items pointing

down. If you remove the slotted covers from the silverware

basket, mix items in each section of the basket with some

pointing up and some down to avoid nesting. Spray cannot

reach nested items.

■ Use slots in the covers and suggested loading patterns to

keep your silverware separated for optimum wash.

Upper rack Lower rack

Dishwasher Use

Load dishes so that water spray will reach every surface.

MDB7959SH and MDB7979SH

MDB8989SH

SLIDE

1.

2.

3.

4.

Varies by model

6

STEP 2

Add Detergent

Premeasured Detergents

High-quality premeasured tablets and packs are recommended

for improved performance.

Quality tablets and packs have been proven better than powder,

liquid or gel detergents at reducing lming on dishes. Using

tablets and packs over time will start to reduce or eliminate

white lm. They are suitable for all hardness and soil levels. Also,

by using a rinse aid, you can minimize repeat buildup of white

lm (not all packs and tablets contain rinse aid). Always place

premeasured detergents in main compartment and close the lid.

NOTE: Follow instructions on the package when using other

dishwasher detergent types or use the chart below for standard

powdered detergents.

■ Use automatic dishwasher detergent only. Add detergent just

before starting a cycle.

■ Fresh automatic dishwasher detergent results in better

cleaning. Store tightly closed detergent container in a cool

dry place.

Place selected detergent in

the dispenser. Place nger, as

shown, and slide lid closed.

Press rmly until it clicks.

Push OPEN, as shown, and the

lid will slide open.

Powders and Gels

Water

Hardness

Soil Level Prewash

Compartment*

Main Wash

Compartment

Soft (0-4

grains

per U.S.

gallon)

Light None “Soft” ll line

Normal None “Soft” ll line

Heavy Full “Soft” ll line

Medium

(5-9

grains

per U.S.

gallon)

Light None “Soft” ll line

Normal Full Full**

Heavy Full Full**

Hard (10-

14 grains

per U.S.

gallon)

Light Full Full**

Normal Full Full**

Heavy Full Full**

*The prewash compartment is on top of the sliding door

of the dispenser.

**A full main wash compartment contains 2 Tbsp (30 ml).

STEP 3

Rinse Aid

IMPORTANT: Your dishwasher is designed to use rinse aid. The

use of rinse aids greatly improves drying by allowing water to

drain from the dishes after the nal rinse. Rinse aid also keeps

water from forming droplets that can dry as spots or streaks.

Filling the dispenser

The dispenser holds 5 oz (150 mL) of rinse aid. Under most

conditions this will last 1 to 3 months.

NOTE: Indicator reads correct ll level when door is completely

opened.

1. To add rinse aid, open the rinse dispenser lid by gently

pushing in the center of the lid with your thumb and pulling

up on the edge.

2. Pour rinse aid into the opening until the dispenser is full. Do

not overll.

3. Clean up any spilled rinse aid. Spilled rinse aid can create

excessive suds.

4. Close the dispenser by pushing down gently on the lid.

Rinse Aid Setting

Your rinse aid dispenser is adjustable. For most water

conditions, the factory setting will give good results. If you

have hard water and notice calcium buildup on your dishware,

you may want to try a higher setting. If you notice foam in your

dishwasher, use a lower setting.

To adjust the setting:

Turn the arrow adjuster to a higher number to increase the

amount of rinse aid. If you change the setting only change it one

number at a time and run a few cycles before changing it again.

Too much rinse aid can reduce cleaning performance and too

little may leave spots or rings.

SLIDE

IMPORTANT: Extremely hard water mineral deposits (15 grains

per U.S. gallon or more) can cause damage to your dishwasher

and make it difcult to achieve good results. A water softener

is recommended to avoid damage and achieve good results.

NOTE: Follow instructions on the package when using other

dishwasher detergent types.

SLIDE

Full

Add

Pre

Wash

O

P

EN

SLIDE

To close lid

To open lid

SLIDE

7

STEP 4

Select a Cycle

Efcient dishwashers run longer to save water and energy,

just as driving a car slower saves on gas. Typical cycle time

is approximately 2

1

/

2

hours but can take less or more time to

complete depending on selections. Press START keypad to

select the Auto cycle or select another cycle appropriate for your

load (see Cycle Guide).

Select Options (Options varies by model)

See the “Cycle and Option Descriptions” chart in the following

section.

You can customize the cycles by selecting the options desired

and pressing the START keypad.

STEP 5

Start a Cycle

■ If needed, run hot water at the sink nearest your dishwasher

until the water is hot. Turn off water.

■ For best dish washing results, water should be 120ºF (49ºC)

as it enters the dishwasher.

■ Select the wash cycle and options desired. To run the Auto

cycle, press the START keypad twice. Within 4 seconds

of pressing START keypad you must rmly push the door

closed. If the door is not closed within 4 seconds, the START

light will ash, an audible tone will be heard, and the cycle

will not start.

■ You can add an item at the beginning of the cycle. Open the

door slowly and add the item. Press the START keypad and

close the door rmly within 4 seconds. If the door has been

open more than 4 seconds the light will ash, a tone will

sound and the dishwasher will not resume unless you press

START keypad again.

IMPORTANT: If the door has been opened for more than a few

seconds after the cycle has started (even during the Delay time),

The START button must be pressed again or the cycle will not

resume.

STEP 6

Follow the progress of your dishwasher

A light on the front right corner of the door panel will glow blue

for washing/rinsing, red for drying, and white for complete.

The display will indicate cycle progress such as Add Dish,

Washing, Drying, Clean and Sanitized. The cycle has completed

when the Clean light is lit. Refer to the Controls and Cycle Status

section for operation of the Sanitized indicator.

Dishwasher Features

Silverware Basket (Varies by model)

Silverware basket lids:

Use silverware basket lids to provide optimal spacing and best

cleaning performance.

NOTE: If your silverware does not t into the designated slots,

push tabs inward on either end and lift lid off of the silverware

baskets. Mix silverware types to keep them separated. Load

knives down, forks up, and alternate spoons for best cleaning

results.

Cup Shelves (On some models)

Fold down the extra shelf on the left-hand or right-hand side of

the top rack to hold additional cups, stemware, or long items

such as utensils and spatulas. For best results on cups, stagger

the spacing so that the cups on the shelf are not directly above

the cups below.

Removable Top Rack LAVA RAIL (On some models)

The removable top rack allows you to wash larger items, such as

pots, roasters, and cookie sheets, in the bottom rack.

IMPORTANT: Remove dishes prior to removing the top rack

from the dishwasher.

Adjustable Upper Rack

You can raise or lower the top rack to t tall items in either the

upper or lower rack. Adjusters are located on each side of the

top rack.

To Raise : Press both rack adjuster thumb levers and lift the

rack until it is in the up position and level.

To Lower: Press both rack adjuster thumb levers and slide the

rack to its down position and level.

NOTE: The top rack must be level.

8

Culinary Tool Rack (Third level rack, on some models)

The culinary tool rack is designed with 2 movable baskets to hold

extra silverware, knives and cooking utensils. Install the baskets

in this up position when you have extra silverware and atware to

wash.

Removable Top Rack CC-RAIL (On some models)

The removable top rack allows you to wash larger items such as

pots, roasters, and cookie sheets in the bottom rack.

IMPORTANT: Remove dishes prior to removing the top rack

from the dishwasher.

To remove the rack

1. To gain access to the track stops, pull the upper rack

forward about halfway out of the tub.

2. To open, ip the track stop toward the outside of the tub.

3. After opening both track stops, pull top rack out of the rails.

4. Close track stops and slide the tracks back into the

dishwasher.

3. Insert front rack wheels on each side of the rack into the

track slots.

4. Slide rack into the dishwasher. The stops will automatically

close when rack enters dishwasher.

Easy To Remove Third Level Rack (On some models)

If additional space is needed in the upper rack, the third level

rack can easily be removed.

Install the baskets in this down position when you have extra

silverware, knives, or utensils requiring more room to wash.

IMPORTANT: When you are using the culinary tool baskets

in the down position, the top rack must also be in the lowest

position.

Remove the front basket when you are using the cup shelves or

have other tall items in the top rack for more room.

To remove the rack:

To gain access to the removable tabs on the tracks/rails, pull the

upper rack forward about halfway out of the tub.

On one side, press the tab on the track in and pull up the front

end of the rack out of the track. Then repeat this step on the

other side to completely remove the front end of the rack.

Then remove the rack by pulling the back end out using a

forward and upward motion.

To replace the rack:

Pull the tracks forward about halfway out of the tub. Along the

sides of the racks are round attachment tabs. Align the rack’s

back end attachment tabs with the cutout in the track. Push

down into place. Pull the tracks completely out, and align the

rack’s front-end attachment tabs with the cutout in the track.

Push down into place. You will hear a snap when the front end of

the rack is secured into place on each side.

To replace the rack

1. Gently pull tracks forward in dishwasher until they stop.

Open track stops.

2. Place the back wheels on each side of the rack into the track

slot and roll them back into the tracks, but do not push the

rack all the way into the tub.

Up position

Down position

A. Track stop B. Track

9

Stemware Guides (On some models)

Stemware guides are designed into the cup shelf. Use them to

hold stemware more securely.

Removable Culinary Tool Rack (Third level rack, on

some models)

The removable Culinary Tool Rack (Third level rack) allows you to

wash larger items in the upper rack, or remove both the Culinary

Tool Rack and top rack to wash larger times in the lower rack.

See “Removable Top Rack” section.

To Remove the Culinary Tool Rack

1. To access track stops, pull the rack forward until it stops and

clicks into place.

2. To open track stops, ip the track stop (A) to the outside of

the track.

3. After opening both track stops, slide front wheels up and out

of the slot (B) in track. Continue to pull rack forward in track

and slide the back wheels up and out of the track.

4. Close track stops.

5. Slide rack tracks back into dishwasher.

Cycle and Option Descriptions

Estimated cycle times may increase or decrease depending on water temperature, soil conditions, dish load size, and options

selected. You can customize your cycle by selecting options.

See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can

change an option anytime before the selected option begins. At each stage of the wash cycle, you may hear noises that you are not

used to hearing in your previous dishwasher. Each cycle will provide a series of pauses and water sprays throughout the wash cycle.

This is normal and will provide optimal cleaning performance.

CYCLE SELECTIONS

IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts

the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the

cycle will automatically compensate by adding time, heat, and water as needed.

This information covers several different models. Your dishwasher may not have all of the cycles and options described.

A

B

A. Track stop B. Track

MDB7959SH and MDB7979SH

MDB8989SH

10

CYCLES ESTIMATED

WASH TIME*

W/O OPTIONS

(HH:MM)

WATER

USAGE

GALLONS

(LITERS)

Targets toughest food soils. Use for hard-to-clean heavily soiled pots, pans,

casseroles, and tableware.

3:30 to 3:45 9.0 (34.2)

This cycle senses the load size, soil amount, and toughness of soil, to adjust the

cycle for improved cleaning, using only the amount of water and energy needed.

The Auto cycle is automatically selected if you rst press the Start button. Includes

a heated drying option.*

2:45 to 3:15 4.5 to 6.9

(17.0 to 26.0)

This cycle is recommended for daily, regular or typical use to completely wash

and dry a full load of normally soiled dishes. This dishwasher’s government energy

certications were based on the Normal cycle with only the Short Power Dry (Short

Heated Dry on some models) option selected.**

2:30 to 3:30 3.0 to 7.4

(11.2 to 27.9)

For fast results, the Quick cycle will clean dishes using slightly more water and

energy. For improved drying, select a power or heated drying option.

NOTE: Some detergents are not recommended for short wash cycles, please refer

to your detergent packaging for more information. Includes a heated drying option.

1:00 5:5 (21.0)

Use for rinsing dishes, glasses, and silverware that will not be washed right away.

Do not use detergent. During cycle, the rinse action will repeatedly pause for several

seconds.

0:07 1.3 (5.0)

*The government energy certications are not based on this cycle. See the Normal cycle description for the government

energy certication cycle. Using the Auto cycle may increase your energy usage.

**No other washing and drying temperature options were selected, and the dishwasher was not subjected to truncated testing.

Rinse aid was not used, and there was no detergent used in the prewash.

OPTIONS CAN BE

SELECTED

WITH

WHAT IT DOES ADDED

TIME TO

CYCLE

(HH:MM)

ADDED

WATER

GALLONS

(LITERS)

Raises main wash temperature to improve

cleaning for loads containing tough, baked-on

food.

Auto

PowerBlast

®

Normal

Raises main wash

temperature to a

minimum of 129°F

(53.9°C). Press and

hold the button for

3 seconds to turn

on/off sound.

0:00 to 1:00 0-3.3

(0-12.5)

Sanitizes dishes and glassware in accordance

with NSF International NSF/ANSI Standard 184

for Residential Dishwashers. Certied residential

dishwashers are not intended for licensed food

establishments. Only sanitizing cycles have

been designed to meet the requirements of the

NSF/ANSI 184 performance standard for soil

removal and for sanitization efcacy. There is

no intention, either directly or indirectly, that all

cycles on a NSF/ANSI 184 certied dishwasher

meet the NSF/ANSI 184 performance standard

for soil removal and for sanitization efcacy.

The Sani Rinse indicator glows at the end of the

cycle if the Sani Rinse option was successfully

completed. If your load did not properly sanitize,

the indicator will ash at the end of the cycle.

This can happen if the cycle is interrupted,

or if the water does not reach the required

temperature. The light goes off when you open

and close the door or press CANCEL.

Auto

PowerBlast

®

Normal

Raises the main

wash temperate

to 145°F (62.8°C)

and the nal rinse

temperature to

(156°F (69°C).

0:15 to 1:30 0-3.7

(0-14.0)

Dries dishes with heat. This option, with the

use of rinse aid, will provide optimum drying

performance. Plastic items are less likely to

deform when loaded in the top rack. Turn off all

heated dry options for air dry.

Auto

PowerBlast

®

Normal

Quick

Uses a heating

element to speed

drying times. Short

Heated Dry option

is on when any

cycle is selected

except for Quick

and Rinse.

0:11 to 0:46 NA

Uses heat and additional time to dry dishes. For

the very best drying performance, use rinse aid

and the Long Heated Dry option.

Turn off all heated dry options for air dry.

Auto

PowerBlast

®

Normal

Quick

Lengthens the time

that Heated Dry is

active.

0:43 to 1:20 NA

Heated

Dry

Models)

Long

Heated

Dry

Models)

OPTION SELECTIONS

11

OPTIONS CAN BE

SELECTED

WHAT IT DOES ADDED TIME

TO CYCLE

ADDED

WATER

GALLONS

(LITERS)

Dries dishes with heat and a fan. This option,

with the use of rinse aid, will provide optimum

drying performance. Plastic items are less likely

to deform when loaded in the top rack. Turn off all

Fan Dry options for air dry.

Auto

PowerBlast

®

Normal

Quick

Uses a heating

element and fan

to speed drying

times. Short

Power Dry option

is on when any

cycle is selected

except for Quick

and Rinse.

0:11 to 0:46 NA

Uses heat and a fan for additional time to dry

dishes. For the very best drying performance, use

rinse aid and the Long Power Dry option. Turn off

all Fan Dry options for air dry.

Auto

PowerBlast

®

Normal

Quick

Lengthens the

time that Long

Power Dry is

active.

0:43 to 1:20 NA

Runs dishwasher at a later time or during off-peak

electrical hours. Select a wash cycle and options.

Press DELAY to cycle through the delay time

options. Press START. Close door rmly.

NOTE: Any time the door is opened (such as, to

add a dish), the START keypad must be touched

again to resume the delay countdown.

Available with

any cycle

Delays start of a

cycle by 8 hours.

CONTROL PURPOSE COMMENTS

Press to START

a wash cycle.

If the door is opened during a cycle or the power is interrupted, the START

button light ashes. Cycle will not resume until START is pressed and

the door is closed. Push door rmly closed within 4 seconds of pressing

START.

Press to cancel

wash cycle

Press and hold CANCEL for 3 seconds. Close the door rmly. The

dishwasher starts a 2-minute drain (if needed). Let dishwasher drain

completely.

The display

allows you

to follow the

progress of the

dishwasher

cycle.

Your dishwasher has indicators that glow for Add Dish, Washing, Drying,

Sanitized and Clean.

The exterior status light on the front of the door panel will glow blue when

washing, red while it is drying, and white when the cycle is complete.

Canceling A Cycle

1. Open the door slightly to stop the cycle. Wait for the

spraying action to stop before completely opening the door.

2. Press CANCEL. The Cancel indicator will glow.

3. Close the door and the dishwasher starts a drain cycle (if

water remains in bottom of dishwasher). Let the dishwasher

drain completely. The Cancel indicator turns off after 2

minutes.

Changing A Cycle After Dishwasher Is Started

You can interrupt a cycle and restart your dishwasher from the

beginning using the following procedure.

1. Open the door slightly to stop the cycle. Wait for the

spraying action to stop, then open the door completely.

2. Check that detergent dispenser cover is still closed.

a. If cover is open cancel the cycle and start a new cycle

b. If cover is closed continue to next step

3. Press CANCEL twice to reset the control.

4. Select new cycles and options.

5. Press START.

Adding A Dish With Add A Dish Indicator

1. If Add a Dish indicator is lit. proceed to Step 2. If indicator is

not lit an added dish might not get cleaned.

2. Open the door slightly to stop the cycle. Wait for the

spraying action to stop, and then open the door completely.

3. Add the dish.

4. Press START keypad and close the door within 4 seconds to

resume the cycle.

Short

Power

Dry

Models)

Long

Power

Dry

Models)

D

CONTROLS AND CYCLE STATUS

Hold 3 Sec

12

Cleaning the Exterior

Clean the exterior of the dishwasher with only a soft, damp cloth,

and mild detergent. If your dishwasher has a stainless steel

exterior, it may have a coating that is resistant to ngerprints.

Avoid using abrasive cleaning products on the exterior of the

dishwasher.

Cleaning and Maintaining the Interior

Many detergents may leave white spots or a white residue on

dishware and on the interior of the dishwasher. Over time this

residue can become unsightly and could affect dishwasher

performance. Use of a dishwasher cleaning product such as

affresh

®

† Dishwasher Cleaner can help to remove the residue.

Monthly use of affresh

®

† Dishwasher Cleaner is recommended

to help maintain the dishwasher.

To Use:

1. If cleaning without dishes, place one tablet in the detergent

dispenser. Do not add detergent (If signicant buildup is

noticeable, a second tablet can be placed in the bottom of

the dishwasher.)

2. If cleaning with dishes, place one tablet in the bottom of the

dishwasher. Place detergent in the dispenser.

3. Run a Normal wash cycle.

Another method to remove white residue is to use a vinegar

rinse. However, vinegar is an acid and using it too often could

damage your dishwasher.

Place (do not pour), 2 cups (500 mL) white vinegar in a

glass or dishwasher-safe two-cup capacity container on

the bottom rack. Run the dishwasher through a complete

washing cycle using an air-dry or an energy-saving dry

option. Do not use detergent. Vinegar will mix with the wash

water.

To Reduce Risk of Property Damage During

Vacation or Extended Time Without Use

■ When you will not be using the dishwasher during the

summer months, turn off the water and power supply to the

dishwasher.

■ Make sure the water supply lines are protected against

freezing conditions. Ice formations in the supply lines

can increase water pressure and cause damage to your

dishwasher or home.

■ Damage from freezing is not covered by the warranty.

■ When storing your dishwasher in the winter, avoid water

damage by having your dishwasher winterized by authorized

service personnel.

†affresh

®

is a registered trademark of Whirlpool U.S.A.

NOTE: Maytag recommends the use of high-quality,

premeasured detergent tablets or packs, and the use of rinse aid

for dishwasher cleaning and daily care.

If you have a drain air gap, check and clean it if the dishwasher

isn’t draining well.

Dishwasher Care

13

Troubleshooting

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call,

refer to the warranty page in this manual or visit www.maytag.com/product_help. In Canada, visit www.maytag.ca/product_help.

Contact us by mail with any questions or concerns at the address below:

In the U.S.A.:

Maytag Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in the correspondence.

In Canada:

Maytag Brand Home Appliances

Customer eXperience Centre

200 – 6750 Century Ave.

Mississauga, Ontario L5N 0B7

PROBLEM SOLUTION

DISHWASHER DOES NOT RUN NOTE: It is normal for the dishwasher to repeatedly pause several times during a cycle.

If the START light is blinking, press the START keypad and close the door within 4

seconds. Be sure the door is closed and latched.

■ Check that there is not an interference with large casserole dishes and the wash

system at the back of the dishwasher.

■ Check to see if any items are protruding through the bottom or back of the rack. Also

check to see if tall items are hitting the upper rack or spray arm. Adjust loading as

necessary to ensure door is closed and latched.

Press the START or CANCEL keypads or open and close the door before selecting your

cycle/option. Controls must be awakened after a period of inactivity.

Be sure you have selected a cycle. See “Cycle and Option Descriptions” section.

Be sure there is power to the dishwasher. A circuit breaker or fuse may have tripped.

If lights other than START blink and the unit will not run, you will need to call for service.

DETERGENT REMAINS IN THE

DISPENSER OR TABLET IS ON

BOTTOM OF TUB

Check for dishware such as cookie sheets, cutting boards, or large containers, etc., that

may be blocking the detergent dispenser from opening properly.

Be sure your detergent is fresh and lump free.

Be sure the cycle has completed (the Done light is on). If it has not completed, you will

need to resume the cycle by closing the door and pressing START.

CYCLE RUNS TOO LONG NOTES:

■ To use less water and reduce energy consumption, you will encounter cycles that

typically run for up to 3 hours.

■ A water heater setting of 120°F (49°C) is best the dishwasher will delay longer while

heating cooler water.

■ Some options will add time to the cycle. See the “Cycle and Option Descriptions”

section. The Heat Dry option adds approximately 45 minutes.

Try the Quick Wash cycle.

Run the hot water at a faucet close to the dishwasher before starting the cycle.

DISHWASHER NOT DRYING NOTE: Plastic and items with nonstick surfaces are difcult to dry because they have a

porous surface, which tends to collect water droplets. Towel drying may be necessary.

Use of rinse aid along with the Power Dry or Heated Dry option is needed for proper

drying. Proper loading of items can affect drying. (See specic loading instructions within

this guide.) Glasses and cups with concave bottoms hold water. This water may spill

onto other items when unloading.

■ Unload the bottom rack rst.

■ Locate these items on the more slanted side of the rack for improved results.

WILL NOT FILL Be sure the water to the dishwasher is turned on.

Check that the overll protection oat is free from obstructions. See the “Parts and

Features” section.

Check for suds in the dishwasher. If foam or suds are detected, the dishwasher may not

operate properly or may not ll with water. See “Blinking Lights” in the “Troubleshooting”

section.

WATER REMAINS IN THE TUB/WILL

NOT DRAIN

Be sure the cycle has completed (the Clean indicator is on). If it has not, you will need to

resume the cycle by pressing START and closing the door within 4 seconds.

If dishwasher is connected to a food waste disposer, be sure the knockout plug has been

removed from the disposer inlet.

Check for kinks in the drain hose.

Check for food obstructions in the drain or disposer.

Check your house fuse or circuit breaker.

14

PROBLEM SOLUTION

HARD WATER (WHITE RESIDUE ON

DISHWASHER INTERIOR OR

GLASSWARE)

NOTE: Extremely hard water mineral deposits can cause damage to your dishwasher

and make it difcult to achieve good cleaning. A water softener is strongly recommended

if your hardness is 15 grains or more. If a water softener is not installed, the following

steps may help:

Use a commercial cleaner (affresh

®

† dishwasher cleaner recommended) designed for

dishwashers once per month.

Always use a rinse aid.

Always use a high-quality, fresh detergent.

Use a detergent booster/water softener additive designed for dishwashers.

ODORS NOTE: If the dishwasher is not used daily, you can run a rinse cycle with the partial load

until a full load is ready to run.

Run a vinegar rinse through the dishwasher by putting 2 cups (500 mL) of white vinegar

in an upright 2-cup glass measuring cup in the lower rack. Run a Normal cycle with the

Heat Dry option turned off. Do not use detergent.

The dishwasher may not be draining properly, see “Water Remains In The Tub/Will Not

Drain” in the “Troubleshooting” section.

NOISY Surging sounds can occur periodically throughout the cycle while the dishwasher is

draining. Normal water valve hissing may be heard periodically.

A normal snap sound may be heard when the detergent dispenser opens during the

cycle and when the door is opened at the end of the cycle.

Improper installation will affect noise levels.

A thumping sound may be heard if items extend beyond the racks and interfere with the

wash arms.

Readjust the dishware and resume the cycle.

FOOD SOILS REMAIN ON DISHES Be sure the dishwasher is loaded correctly. Improper loading can greatly decrease the

washing performance. See the “Dishwasher Use” section.

Select the proper cycle and option for the type of soils. The PowerBlast

®

cycle with the

High Temp Wash option can be used for tougher loads.

Be sure the incoming water temperature is at least 120°F (49°C).

Use the proper amount of fresh detergent. More detergent is needed for heavier soiled

loads and hard water conditions.

Scrape food from dishes prior to loading (do not prerinse).

DISHES DIRTY/SUDS IN

DISHWASHER/CYCLE NOT

COMPLETE

If foam or suds are detected by the dishwasher sensing system, the dishwasher may not

operate properly or may not ll with water.

Suds can come from:

■ Using the incorrect type of detergent, such as dish detergent for hand washing

dishes, laundry detergent, or hand soap.

■ Not replacing the rinse aid dispenser cap after lling (or relling) the rinse aid.

■ Using an excessive amount of dishwasher detergent.

■ Inadequate rinsing off detergent from dishes washed by hand before loading them

into the dishwasher.

Call for service.

If no water was present in the machine at any time during a heated wash cycle, the

cycle will end and the Clean indicator will not come on. See “Will Not Fill” in the

“Troubleshooting” section.

DID NOT SANITIZE If the Sanitized light is blinking, the load is NOT sanitized. The cycle was interrupted

in the nal rinse or the temperature for your water heater is set too low. Set your water

heater to 120ºF (49°C).

DAMAGE TO DISHWARE Improper loading can cause dishes to become chipped or damaged. (See specic

loading instructions within this guide.)

BLINKING LIGHTS Blinking indicators will occur when the cycle is paused or when the cycle has been

interrupted by opening the door. If the START light is blinking, press the START keypad

and close the door within 4 seconds.

See START a Cycle in the “Dishwasher Use” section.

If the Clean light or any other lights are blinking and the dishwasher will not run, call for

service.

†affresh

®

is a registered trademark of Whirlpool U.S.A.

15

PROBLEM SOLUTION

CLOUDY OR SPOTTED DISHWARE

(AND HARD WATER SOLUTION)

Add or adjust the amount of liquid rinse aid for better drying and to reduce spotting. See

the “Detergent and Rinse Aid” section.

Use the correct amount of detergent.

Conrm that the cloudiness is removable by soaking the item in white vinegar for 5

minutes. Dry the item. If the cloudiness disappears, it is due to hard water. Adjust the

amount of detergent and rinse aid. See “Hard Water (White Residue on Dishwasher

Interior or Glassware)” in the “Troubleshooting” section. If it does not come clear, it is

due to etching (see below).

Be sure the incoming water temperature is set at 120°F (49°C).

Try using the High Temp Wash and Sani Rinse options.

To remove spotting run a vinegar rinse through the dishwasher using the description in

the Cleaning and Maintaining the Interior section.

ETCHING (PERMANENT

CLOUDINESS)

This is an erosion of the surface of the glassware and can be caused by a combination of

water that is too hot, from using too much detergent with soft water, or by

pre-washing. Detergent needs food soil to act upon. If etching has occurred, the

glassware is permanently damaged. To avoid further etching, adjust the detergent

amount to match the water hardness, stop pre-washing, and use water heating options

only when incoming water temperature is below 120°F (49°C).

LEAKING WATER Be sure dishwasher has been installed properly and is level.

Suds can cause the dishwasher to overow. Measure the detergent accurately and use

only detergents designed for use in a dishwasher. Less detergent is needed in soft water.

Try another brand of detergent if sudsing continues.

To avoid rinse aid leaking from the dispenser, be sure the lid is securely attached and

avoid overlling.

TUB IS DISCOLORED High iron content in the water can discolor the tub.

Tomato-based and other foods, can discolor the tub or dishware. Large amounts of food

with curry, chili powder, paprika, mustard and similar spices and tomato-based foods

should be removed from the dishes before loading.

A citrus-based cleaner can be used to clean the tub.

16

IF YOU NEED SERVICE:

1. Before contacting us to arrange service, please determine whether your product requires repair. Some questions can be addressed without

service. Please take a few minutes to review the Troubleshooting section of the Use and Care Guide or visit producthelp.maytag.com.

2. All warranty service is provided exclusively by our authorized Maytag Service Providers. IntheU.S.and Canada, direct all requests for warranty

service to:

Maytag Customer eXperience Center

In the U.S.A., call 1-800-688-9900. In Canada, call 1-800-807-6777.

If outside the 50 United States or Canada, contact your authorized Maytag dealer to determine whether another warranty applies.

MAYTAG

®

DISHWASHER

LIMITED WARRANTY

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED

TO OBTAIN WARRANTY SERVICE.

Please have the following information available when you call the

Customer eXperience Center:

■ Name, address, and telephone number

■ Model number and serial number

■ A clear, detailed description of the problem

■ Proof of purchase, including dealer or retailer name and address

TEN YEAR LIMITED WARRANTY

WHAT IS COVERED WHAT IS NOT COVERED

FIRST YEAR LIMITED WARRANTY (PARTS AND LABOR)

For one year from the date of purchase, when this major appliance is

installed, operated, and maintained according to instructions attached to

or furnished with the product, Maytag brand of Whirlpool Corporation or

Whirlpool Canada LP (hereafter “Maytag”) will pay for factory specied

replacement parts and repair labor to correct defects in materials or

workmanship that existed when this major appliance was purchased

or, at its sole discretion, replace the product. In the event of product

replacement, your appliance will be warranted for the remaining term

of the original unit’s warranty period.

SECOND THROUGH TENTH YEAR LIMITED WARRANTY

(CERTAIN COMPONENT PARTS ONLY – LABOR NOT INCLUDED)

In the second through tenth years from the date of original purchase,

when this major appliance is installed, operated, and maintained

according to instructions attached to or furnished with the product,

Maytag will pay for factory specied replacement parts for the

following components to correct non-cosmetic defects in materials or

workmanship in these parts that prevent function of this major appliance

and that existed when this major appliance was purchased. This is a

limited ten year warranty on the below named parts only and does not

include repair labor.

■ Upper and lower racks (excludes cup shelves and

silverware basket)

■ Chopper blade

■ Stainless steel tub and inner door liner

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

Service must be provided by a Maytag designated service company.

This limited warranty is valid only in the United States or Canada and

applies only when the major appliance is used in the country in which

it was purchased. This limited warranty is effective from the date of

original consumer purchase. Proof of original purchase date is required

to obtain service under this limited warranty.

1. Commercial, non-residential, multiple-family use, or use inconsistent

with published user, operator, or installation instructions.

2. In-home instruction on how to use your product.

3. Service to correct improper product maintenance or installation,

installation not in accordance with electrical or plumbing codes, or

correction of household electrical or plumbing (e.g., house wiring,

fuses, or water inlet hoses).

4. Consumable parts (e.g., light bulbs, batteries, air or water lters,

preservation solutions, etc.).

5. Defects or damage caused by the use of non-genuine Maytag parts

or accessories.

6. Damage from accident, misuse, abuse, re, oods, acts of God,

or use with products not approved by Maytag.

7. Repairs to parts or systems to correct product damage or defects

caused by unauthorized service, alteration, or modication of the

appliance.

8. Cosmetic damage including scratches, dents, chips, and other

damage to the appliance nishes, unless such damage results from

defects in materials and workmanship and is reported to Maytag

within 30 days.

9. Discoloration, rust, or oxidation of surfaces resulting from caustic

or corrosive environments including, but not limited to, high salt

concentrations, high moisture or humidity, or exposure to chemicals.

10. Pickup or delivery. This product is intended for in-home repair.

11. Travel or transportation expenses for service in remote locations

where an authorized Maytag servicer is not available.

12. Removal or reinstallation of inaccessible appliances or built-in xtures

(e.g., trim, decorative panels, ooring, cabinetry, islands, countertops,

drywall, etc.) that interfere with servicing, removal, or replacement of

the product.

13. Service or parts for appliances with original model/serial numbers

removed, altered, or not easily determined.

The cost of repair or replacement under these excluded

circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO TEN YEARS OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow

limitations on the duration of implied warranties of merchantability or tness, so this limitation may not apply to you. This warranty gives you specic

legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Maytag makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations

contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance, you

should ask Maytag or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES: EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. MAYTAG

SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation

of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specic legal rights, and

you also may have other rights that vary from state to state or province to province.

08/17

Page is loading ...

Maytag MDB7959SHK0 User manual

Maytag MDB7959SHK0 User manual

in other languages

Related papers

Other documents