INNOVATIVE WORKSPACE PRODUCT SOLUTIONS
FOLDCAB3636B – INSTRUCTIONS
Parts List
A x4
B x6 C x2
M4
Phillips
Screwdriver
OR
Electric Drill
Tools Required:
1
3
2
4
Place cabinet on floor with door facing up.
Stand cabinet upright, fold sides out
to form a rectangle.
Cabinet
Top
Floor panel must extend
over front panel lip.
Floor Panel
Fold bottom floor panel into position.
Open doors and remove cabinet top.
INNOVATIVE WORKSPACE PRODUCT SOLUTIONS
FOLDCAB3636B – INSTRUCTIONS
*Release spring pin,
underside of shelf
Install Shelf Clips
Install top
shelf lip first
Pull spring pin at top right of the underside
of the shelf to release shelf down.
Install Shelf Clips.
Install the top of the cabinet onto the unit by
first pressing the front corners firmly into place.
Press back corners down firmly to secure
into position.
Use the screws to secure the top onto
the cabinet.
Place front of the shelf onto the shelf clips.
Press firmly into place on front corners.
5
7
6
8
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Lifetime 6411 Owner's manual
-
Anthro AA03BN Datasheet
-
U-Line U-2218RS-00B User guide
-
U-Line U-2224RGLS-13B Owner's manual
-
-
-
-
Lifetime 6402 Owner's manual
-
U-Line U-3036RRGLINT-00B User guide
-