Preserva Wood 40515 User manual

Stain Project Guide

Preparation

 Clean wood with Preserva Products Renewer & Cleaner or a soap and water solution

 Allow wood to dry overnight

Mix

 Blend together all containers when using more than one container

 Stir, ensuring that all pigment on the bottom of the can has been dispersed

 Stir every 15 minutes during use

Test

 Stain a small area and allow to dry to test for color satisfaction and overall appearance

Application

 Apply to horizontal surfaces (decks) with an oil-based stain pad or stain brush

 Wipe off shiny sections within 30 minutes. Preserva Wood® is meant to penetrate. Do not

over-apply

 Soak rags in water prior to disposal

 Apply to vertical surfaces (fences and siding) with a pump sprayer and/or a stain brush

 Back brush any runs to ensure even application

Clean-Up & Disposal

 Do not place oil soaked rags or tools into the trash

 Immerse oil soaked rags in water, lay out to dry in an open area away from all heat and sources

of ignition

 Clean reusable tools (brushes & pump sprayers) with mineral spirits

Resources

 www.preservaproducts.com for additional product information

 [email protected]m for all technical support and questions

 800-797-2537 Monday-Thursday 9am-4pm PST

Preserva Wood® Exterior Stains are high solids (75%), true oil-based stains based on natural seed oils

and alkyd resins. Preserva Wood® penetrates deep into the wood, protecting the wood from within,

and never cracking or peeling. Maintenance is as simple as cleaning and re-treating.

Thank you for purchasing Preserva Wood®! Please review our stain at HomeDepot.com

Download PDF